Cimarron Led Spec Sheet
2016-04-21
: Pdf Cimarron Led Spec Sheet cimarron_led_spec_sheet spec products spaulding
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
CIMARRON LED Cat.# Type Job Approvals SPECIFICATIONS Construction: • Stylish vertically finned die-cast solid top housing for maximum heat dissipation; Stops collection of unsightly debris from gathering on top of the housing • LED drivers have output power over- voltage, over-current protection and short circuit protection with auto recovery • Rugged lower die-cast aluminum heat sink accelerates thermal management and optimizes PCB and optical perfor- mance • LED electrical assembly, including PR devices, consumes no power in the ‘off’ state • Separate optical and electrical compart- ment for optimum component operation • One piece die cut silicone gasket ensures weather proof seal around each individual LED for IP65 rating • Backlight Control (BC) option available for 85% spill light reduction, doesn’t change fixture appearance or EPA, recommended for Type III and Type IV distributions • Stamped bezel provides mechanical compression to seal the optical assembly • 1050 mA driver available with 90L con- figuration for increased lumen output • Surge protection – 20KA; Turns fixture off at end of life; Includes LED for end of life indication (see surge suppressor page 4) Controls: • Drivers are 0-10V dimming standard. Photocell, occupancy sensor and wireless controls available for complete on/off and dimming control • Weight - 45.0 pounds, EPA - 1.3 ft2 • Suitable for applications requiring 3G testing prescribed by ANSI C136.31 • Fixture ships with arm installed for ease of installation and mounts to #2 drill pattern Optics: • Choice of 72 high brightness LED configu- rations with individual acrylic lenses specially designed for IES Type II, III, IV and V distributions • Wall bracket, mast arm fitter and pole accessories are also available allowing easy mounting for virtually any application • Auto optics designed for front row 1A and interior rows 2A (see distribution under ordering and page 2) 90 LED 3/4 VIEW Lumen maintenance: • L90 at 60,000 hours (Projected per IESNA TM-21-11) Installation: • Two die-cast aluminum arm designs: The decorative arm offers a sleek upswept look while the straight arm follows the housing’s contoured lines for continuity of style • Complements the Hubbell Southwest series of outdoor fixtures PRODUCT IMAGE(S) 60 LED Warranty: Five year limited warranty (for more information visit: http://www.hubbelloutdoor.com/ resources/warranty/ Electrical: • Universal input voltage 120-277 VAC, 50/60 Hz Listings: • Listed to UL1598 and CSA C22.2#250.0- 24 for wet locations • Integral step-down transformer for 347V & 480V • Ambient operating temperature -40˚ C to 40˚ C • Models meet DesignLights Consor- tium (DLC) qualifications, consult DLC website for more details: http://www.designlights.org/QPL • Automatic thermal self-protection • IDA approved • IP65 90 LED DIMENSIONS Upswept Arm G A F B Straight Arm Finish: • TGIC thermoset polyester powder paint finish applied at nominal 2.5 mil thickness • CCT: 3000K (80 CRI), 4000K (70 CRI), 5000K (70 CRI), and turtle friendly Amber LED options 30 LED E D A B • Drivers have greater than 90% power factor and less than 10% THD • Optional continuous dimming to 10% or dual circuitry available C CERTIFICATIONS/LISTINGS A B C D E F G 6 3/4" 171mm 21 3/4" 552mm 16" 406mm 6 5/8" 168mm 6 5/16" 160mm 5 5/8" 143mm 6 1/8" 155mm *3000K and warmer CCTs only LED Product Partner ORDERING INFORMATION SEE NEXT PAGE Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CL1LED-SPEC 4/16 ORDERING INFORMATION ORDERING EXAMPLE: CL1-A-90LU-5K-3-DB-RPA3 CL1 SERIES NO. OF LEDS CL1 Cimarron LED 90L 90 High brightness LEDs 60L 60 High brightness LEDs 30L 30 High brightness LEDs MOUNTING A Arm mount construction (6” straight rigid arm included & acceptable for 90° configurations) AD Decorative arm mount const. (6” decorative upswept arm incl. & acceptable for 90° configurations) VOLTAGE U 3 1 2 3 4 5 F E4 Universal 120V-277V, 50/60 Hz 120V 208V 240V 3K 4K 5K AM7 277V 480V, 60 Hz 3000K 4000K 5000K Amber (590 nm available for “Turtle Friendly” applications (consult factory) 220V, 50 Hz DISTRIBUTION 2 Type II 3 Type III 4 5M 5S 5W 2L 3L 4L 2R 3R 4R 1A 1AR 1AL 2A 2AR 2AL Type IV Type V Medium Type V Short Type V Wide Type II Rotated 90° left Leave blank for 700mA (standard) 035 350mA Amber CCT only 105 1050 mA (use with 90L only for higher lumen output) COLOR DB BL WH GR PS RD Dark Bronze Black White Gray Platinum Silver Red (premium color) FG Forest Green (premium color) CC Custom Color Type III Rotated 90° left Type IV Rotated 90° left Type II Rotated 90° right Type III Rotated 90° right Type IV Rotated 90° right Auto Front Row Type I Auto Front Row Type I Rotated 90° right Auto Front Row Type I Rotated 90° left Auto Front Row Type II Auto Front Row Type II Rotated 90° right Auto Front Row Type II Rotated 90° left Notes: 1- For BL option 90L and 60L; N/A 347V & 480V 2 - BL & CD cannot be combined 3 - Fuse option not available with universal voltage 4 - Select F3 fusing option for 220V 5 - Photocell receptacle not available with BL option 6 - Recommended for Type III and IV distributions only 7 - Available in 350mA drive current only Type IV, 5M 8 - 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, must order minimum of one SCP-REMOTE control to program dimming settings (see accessories) 9 - Must specify 120V, 208V, 240V or 277V; not available with PR option; consult factory for 347V and 480V application, not available with BL or CD options. 10 - Not available with AD arm 11 - Not available with 480V 12 - Not available with 347V or 480V 13 - Not available with WIR or WIRSC 14 - Not available with SCO, SCL, SCP or SCPW OPTIONS DRIVE CURRENT 347V, 60 Hz MAF Mast arm fitter for mounting to standard 2 3/8" mast arm bracket, includes 6" straight rigid arm CCT BC CD2 WB RPA3 RPA4 RPA5 RPA6 F(X)3,4 6 Backlight control Continuous dimming Wall bracket 3” Round pole adapter 4” Round pole adapter 5” Round pole adapter 6” Round pole adapter Fusing (replace X with voltage: 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, F-347V) VG Vandal guard 7PR Photocell receptacle (7-pin ANSI C136.41—2013 receptacle for use with standard Twist-Lock® photo controls, shorting caps, and ANSI C136.41 external wireless control devices. Select SCL option to add occupancy sensing capability when using with compatible external wireless devices. PIR MOTION/OCCUPANCY CONTROL OPTIONS SCO10,12,13 On/Off control (line voltage device not for use with 7PR receptacle option and external wireless control devices) SCL10,12,13 Add-on occupancy sensor for use with ext. wireless control device connected thru 7PR receptacle. Consult control manufacturer for compatibility. SCP8,10,12,13 Programmable dimming control (line voltage device not for use with 7PR receptacle option and external wireless control devices). A minimum of one SCP-REMOTE accessory remote control required for configuration; (Standard lens with greater sensitivity; motion detection radius equal to .75 X luminaire mounting height (approx. distance) SCPW8,10,12,13 Programmable dimming control CONTROLS GUIDE As energy codes become more restrictive and we push for sustainable lighting designs, the integration of lighting controls and luminaires have become more and more important. Hubbell Lighting offers numerous outdoor lighting controls solutions for the most demanding applications. Visit the link below to learn more about energy-saving controls. www.hubbelllighting.com/solutions/controls/ (line voltage device not for use with 7RP receptacle option and external wireless control devices); A minimum of one SCP-REMOTE accessory remote control required for configuration. (Wide lens with motion detection radius equal to 1.3 X luminaire mounting height (approx. distance) WIRELESS CONTROL OPTIONS WIR11,14 wiSCAPE Fixture Module, in-fixture relay for wireless lighting control WIRSC10,12,14 wiSCAPE Fixture Module, in-fixture relay for wireless lighting control and motion/occupancy control Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CL1LED-SPEC 4/16 ENERGY SAVING DATA 5K (5000K nominal, 70 CRI) #LEDS DRIVE CURRENT SYSTEM WATTS 120-277V 347-480V 30 700 mA 60 90 90 1050mA 70W 80W 135W 150W 205W 225W 325W 350W 4K (4000K nominal, 70 CRI) DIST. TYPE LUMENS LPW1 B U G LUMENS LPW1 B U G 1A 2A 2 3 4 5S 5M 5W 1A 2A 2 3 4 5S 5M 5W 1A 2A 2 3 4 5S 5M 5W 1A 2A 2 3 4 5S 5M 5W 8244 8202 7715 7712 7803 8374 7940 7667 16171 16088 15134 15127 15306 16426 15575 15040 23781 23659 22255 22246 22509 24156 22905 22117 31708 31545 29674 29661 30011 32207 30539 29490 118 117 110 110 111 120 113 110 120 119 112 112 113 122 115 111 116 115 109 109 110 118 112 108 98 97 91 91 92 99 94 91 1 1 2 2 1 3 3 3 1 1 3 3 2 4 4 4 2 2 3 3 3 5 4 5 2 2 4 3 3 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 3 2 2 0 1 2 2 2 3 3 3 0 2 3 2 2 4 4 4 0 2 3 2 2 5 4 5 0 3 4 8162 8121 7639 7635 7726 8291 7862 7591 16011 15929 14984 14977 15154 16263 15421 14891 23546 23425 22035 22026 22286 23916 22678 21899 31394 31233 29380 29367 29714 31888 30237 29198 117 116 109 109 110 118 112 108 119 118 111 111 112 120 114 110 115 114 107 107 109 117 111 107 97 96 90 90 91 98 93 90 1 1 2 2 1 3 3 3 1 1 3 3 2 4 4 4 2 2 3 3 3 5 4 5 2 2 3 3 3 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 2 2 2 0 1 2 1 2 3 3 3 0 2 3 2 2 4 4 4 0 2 3 2 2 5 4 5 0 3 4 AUTOMOTIVE DEALERSHIP OPTICS LUMENS LPW1 — — — — — — — — — — — — 2488 — 2533 — — — — — 3558 — 3596 — — — — — — — — — — — — — 51 — 51 — — — — — 76 — 76 — B U G — — — — — — — — — — — — 0 — 2 — — — — — 1 — 2 — — — — — — — — — — — — — 0 — 0 — — — — — 0 — 0 — — — — — — — — — — — — — 1 — 1 — — — — — 1 — 1 — ENERGY DATA Power Factor >.9 Total Harmonic <10% Distortion 1A - Front Row Auto Optic For Automotive Dealership applications Spaulding Lighting has developed two optics designed for enhanced and proper lighting of the auto dealership merchandise and the front row 1A and interior rows 2A (See CL1 distribution information for details) Optic 1A • Maximum illumination on front row display • Maximum pole spacing Amber (590 ) 2A - Drive Lane Auto Optic Optic 2A • Excellent front row illumination and drive lane • Optimal uniformity for drive lane and interior rows ACCESSORIES/REPLACEMENT PARTS - Order Separately Catalog Number CR-RPA3-XX1 CR-RPA4-XX1 CR-RPA5-XX1 CR-RPA6-XX1 CRD-RPA2-XX1 CRD-RPA3-XX1 CRD-RPA4-XX1 CRD-RPA5-XX1 CRD-RPA6-XX1 WB-CR-XX1 TPLB-XX1 MAF-CL-XX3 Description Round pole adapter for straight arm (31⁄4 - 33⁄4”) Round pole adapter for straight arm (37⁄8 - 41⁄ 2”) Round pole adapter for straight arm (5”) Round pole adapter for straight arm (6”) Round pole adapter for upswept arm (23⁄4 - 31⁄8”) Round pole adapter for upswept arm (31⁄4 - 33⁄4”) Round pole adapter for upswept arm (37⁄8 - 41⁄ 2”) Round pole adapter for upswept arm (5”) Round pole adapter for upswept arm (6”) Wall bracket Twin parallel luminaire bracket Horizontal mast arm fitter for 2 3/8” OD arm. Mounts to standard 6” arm (ordered with fixture) 1 - Replace XX with color choice, eg.: DB for Dark Bronze Catalog Number Description SCP-REMOTE9 Remote control for SCP option. Order at least one per project to program and control. 3.30 93052458 20KA surge protection with an end of life LED indicator 5.59 .83 3.40 1.95 5.62 1.16 1.95 3.89 2 -When ordering poles, specify Pole Drill Pattern #2 3 - Fixture must include standard 6” arm HEX NUT LOCKWASHER FLAT WASHER GASKET THREADED ROD SQUARE POLE COVER POLE TOP VER NUT PLATE COVER CAST ADAPTER CAST ADAPTER PLATE E POLE PT ARM MOUNT E & ROUND POLES 3.5 ARM ROUND POLE .875 TO HOUSING (3-HOLE PATTERN END) #2 DRILL PATTERN FOR POLES 3.5 ROUND POLE CAST ADAPTER NUT PLATE ØSQUARE .563 POLE 3 HOLES SQUARE POLE SQUARE & ROUND POLES 3.875 NUT PLATE NUT PLATE Ø .875 HOLE POLE TOP POLE COVER CAST ARM RETAINER WASHER .875 ROUND POLE POLE COVER FIXTURE 3.875 SCREW COVER UPSWEPT ARM MOUNT SQUARE & ROUND POLES Ø .875 HOLE 2.50 5.59 Ø .563 3 HOLES 3.40 1.95 #2 DRILL PATTERN FOR POLES 1.95 3.89 5.62 1.16 MAF – HORIZONTAL MAST ARM FITTER Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CL1LED-SPEC 4/16 MOUNTING ACCESSORIES Catalog Number ARM-CL-K-TA-XX1 ARM-CL-TK-TA-XX1 ARM-CL-K-S-XX1 Description Adjustable mounting arm for single fixture (2-3/8 tenon) – 5 lbs. 2.3 kgs. Adjustable mounting arm for two fixtures at 180˚ (2-3/8 tenon) – 7 lbs. 3.2 kgs. 10” adjustable arm – .5 lbs. .05 kgs. – 5.75 lbs. 2.6 kgs. 1 Replace XX with color choice, eg.: DB for Dark Bronze 2 Fixture must include standard 6” straight arm ARM-CL-K-TA-XX ARM-CL-TK-TA-XX ARM-CL-K-S-XX MAL-KF-X TENON TOP POLE BRACKET ACCESSORIES MAL-TK-X (2 3/8” OD tenon) (RSS version requires 4” round pole adapter) Catalog Number Description Square pole tenon adapter (4 at 90 degrees) Round pole tenon adapter (4 at 90 degrees) Hexagonal pole tenon adapter (3 at 120 degrees) SETA-XX1 RETA-XX1 TETA-XX1 1 Replace XX with color choice, eg.: DB for Dark Bronze 30 Pole Shadow PHOTOCONTROL EQUIPMENT Catalog Number Description Photocontrol - twist-lock cell (120V) Photocontrol - twist-lock cell (120-277V) Photocontrol - twist-lock cell (480V) Photocontrol - twist-lock cell (347V) Shorting cap - twist-lock PTL-1 PTL-8 PTL-5 PTL-6 PSC 60 Pole Shadow 30 MOTION CONTROLS • Start up delay from initial motion detection to • Vehicle detection is possible however less reliable than human detection; Vehicle detection is fixture illumination is approximately 1-2 seconds dependent upon the following: rate of speed, mounting height of luminaire and vehicle temperature SCP - Designed for intermediate coverage area Pole Shadow Pole Shadow 30 60 30 60 r = .75 x h 30 30 d = 1.5 x h Note: Extreme heat or cold temperatures may limit detection. Pole Shadow Pole Shadow SCPW - Designed for widest coverage area r = .75 x rh= .75 x h d = 1.5 xdh= 1.5 x h Note: Extreme heat or cold temperatures may limit detection. SURGE PROTECTION • Field replaceable surge protection device (SPD) provides 20KA and 10KV protection meeting ANSI/IEEE C62.41.2 Category C High and Surge Location Category C3 • The SPD is designed with a clamping voltage of 1600V at 20KA using industry standard 8/20µs waveform • Max surge current = 20,000 Amps (see table) • LED Indicator – Green LED is unlit at end of life Pulse Rating (8 x 20 µSec) Strikes Surge 1 20,000 A 2 15,000 A 15 10,000 A 120 3,000 A In Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CL1LED-SPEC 4/16 cRUus 10KA CE 5KA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Instance ID : uuid:3d6d95e4-15f7-784e-9f58-a122119acc54 Original Document ID : adobe:docid:indd:bd58f140-0c21-11df-b5de-838fbaf3561a Document ID : xmp.id:c1495a4b-7128-42fb-9158-5b456ca93824 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:04:20 15:11:40-04:00 Derived From Instance ID : xmp.iid:fcb17a80-5ef5-4ef5-aacb-ef26929b3c41 Derived From Document ID : adobe:docid:indd:bd58f140-0c21-11df-b5de-838fbaf3561a Derived From Original Document ID: adobe:docid:indd:bd58f140-0c21-11df-b5de-838fbaf3561a Create Date : 2016:04:20 15:11:40-04:00 Modify Date : 2016:04:20 15:11:55-04:00 Metadata Date : 2016:04:20 15:11:55-04:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools