Endura Spec Sheet Xpl
2017-08-23
: Pdf Endura Spec Sheet Xpl Endura_spec_sheet_xpl spec products beacon
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
ENDURA SERIES Cat.# Type Job design . per formance . technology Approvals WALL/BUILDING MOUNT SPECIFICATIONS PRODUCT IMAGE(S) Intended Use: The Endura is a ceiling surface mounted or pendant mounted parking structure luminaire with a field replaceable LED light-engine & optical bezel system. Internal components are totally enclosed in a rain-tight and corrosion-resistant die cast aluminum housing. The Endura Luminaire is CSA certified and suitable for damp locations (wet location available on request). Construction: • Die cast aluminum two-piece housing • Shape of the top housing is designed as a bird nesting deterrent • Die cast main (thermal) housing provides direct-heat exchange between the LED light engine and the cool outdoor air • Main housing is designed with heat dissipating fins for LED thermal management without the use of metallic screens, cages, or fans • Main and top housings are designed to hinge open for easy mounting and easy access LED/Optics: • Endura luminaire is supplied with an optical one piece cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel bezel • Cartridge is held together with internal brass standoffs soldered to the board so that it can be field replaced as a one piece optical system • Two-piece silicone and polycarbonate foam gasket ensures a weather-proof seal around each individual LED • Endura comes standard with 70 CRI • Cartridge assembly is available in various lighting distributions using TIR designed acrylic optical lenses over each LED Finish • IFS polyester powder-coat electro- statically applied and thermocured. • IFS finish consists of a five stage iron phosphate chemical pretreatment regimen with a polymer primer sealer, ovendry off, and top coated with a thermoset super TGIC polyester powder coat finish • The finish meets the AAMA 2604 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pounds Listings: • The luminaire shall bear a CSA label and be marked suitable for damp locations (standard). Luminaire may be specified for wet locations. • This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate Turtle Friendly spec available at: http://www.beaconproducts.com/products/endura Warranty: Five year limited warranty for more information visit: www.hubbelllighting.com/resources/warranty Occupancy Sensor Shown with SiteSync™ DIMENSIONS Top Bottom 5 1/2” Controls/Options: • Endura is available with an optional passive infrared (PIR) motion sensor capable of detecting motion 360° around the luminaire. When no motion is detected for the specified time, the Motion Response system reduces the wattage down to a factory preset level, reducing light level accordingly. When motion is detected, the luminaire returns to full wattage and full light output. Please contact Beacon Products if project requirements vary from the standard configurations • Available with Energeni for optional set dimming, timed dimming with simple delay, or timed dimming based on time of night. see Energeni product page for more details www.beaconproducts.com/products/energeni Installation: • Top housing is designed with various bolt patterns for mounting to a recessed, surface or rigid-pendant hung ceiling junction box and rigid stem (provided by others) • After mounting the top housing to the junction box, the main housing is designed to hang and hinge closed after connecting the male and female quick connectors • Mounting design permits a simple retrofit to existing parking structure luminaires that utilize surface mount or recessed junction boxes 12” sq. Electrical: • 120V through 277V, 50 Hz to 60 Hz • Dimming drivers are standard, but must contact factory to request wiring leads for purpose of external dimming controls • Component-to-component wiring within the luminaire may carry no more than 80% of rated load and is certified by UL for use at 600VAC at 50°C or higher • Plug disconnects are certified by UL for use at 600 VAC, 13A or higher. 13A rating applies to primary (AC) side only • Surge protection - 20kA • In addition, Endura can be specified with SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit for more details: www.hubbell-automation.com/products/sitesync/ Side CAST COVER 3/4" CONDUIT STEM MOUNT ASSEMBLY (BY OTHERS) Isometric Ceiling Mount Cast cover Stem Mount assembly (by others) 3/4” Conduit 4" CAST J-BOX Ceiling mount J-Box CERTIFICATIONS/LISTINGS Consult Factory Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM EDR-XPL-SPEC ENDURA ORDERING INFORMATION SERIES EDR Endura ORDERING EXAMPLE: EDR/36L-80/5K7/5W/UNV/GENI-02/DBT ENGINE-WATTS CCT/CRI11 OPTICS 24L-27 27 Watts - LED array 3K7 3000K, 5R Type V, 24L-55 55 Watts - LED array 4K7 4000K, 5W Type V, wide 80 Watts - LED array 5K7 5000K , 36L-80 48L-110 110 Watts LED array 70 CRI 70 CRI 70 CRI (std.) rectangular 5QM Type V, square medium 5QN Type V, square narrow 5QW Type V, square wide ELECTRICAL OPTIONS VOLTAGE UNV 120 208 240 277 347 480 Concentrated Spot 4X4 Type V Concentrated Narrow 5X5 Type V Concentrated Medium 5X3 Type V Concentrated Rectangular Not available on 24L-27 Not available @347V or 480V input Not available on 48L-110 4 36L-80 only 5 When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure and instructions for setting table and options. Not available with sensor options. 6 Must specify group and zone information at time or order. See www.hubbell-automation.com/products/sitesync/ for further details. 7 Specify time delay; dimming level and mounting height. 8 Not available with SWP or SWPM control options 9 Not available with other control or sensor options 10 Specify mounting height 11 This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available at: http://cdn.beaconproducts.com/content/products/specs/specs_files/Endura_turtle_LED_spec_sheet.pdf 1 2 GENI-XX 5,9 DBT BMT PS WHT CC 2PF1,2,8 Dual power feed BPC4,8 Cold weather battery BP4,8 pack 0° C battery pack Black Matte Textured Platinum Silver Smooth White Textured Custom Color (RAL#) SENSOR OPTIONS Energeni SWP6,9 SiteSync Wireless SWPM6,7,9 Dark Bronze Textured MOB3,7,9 Occupancy CONTROL OPTIONS HIGHER MOUNTING APPLICATIONS 2X2 Type V COLOR PEC Photocell, button 120-277V 120V 208V 240V 277V 347V 480V OCS9,10 Pre-Commission SiteSync Wireless Pre-Commission w/ Motion Detection Sensor (33% or 50% dimming Occupancy Sensor (on/off) 3 PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.hubbell-automation.com/products/sitesync/ or contact Hubbell Lighting tech support at (800) 345-4928. Accessories and Services (Ordered Separately) Catalog Number Description SWUSB* SiteSync loaded on USB flash drive (Windows based only) SWTAB* SiteSync Windows Tablet SWBRG+ SiteSync Wireless Bridge Node * When ordering with SiteSync, one of the following interface options must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node. + If needed, an additional Bridge Node can be ordered. SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens. Examples: EDR/24L-55/4K7/5W/UNV/SWP/WHT EDR/24L-55/4K7/5W/UNV/SWPM-20F/WHT SiteSync only SiteSync with Motion Control MOB ORDERING INFORMATION: When ordering a fixture with a dimming occupancy sensor (MOB), please specify the appropriate information. These settings are specified in the ordering as shown in the example below. . 33% or 50%- _____ ?? / GYS 1 to 30 min. - __________ EDR/24L-55/4K7/5R/UNV/MOB - _________ High to Dim Delay Low Level Mounting Height (ft.) SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM EDR-XPL-SPEC 20‘ 40’ 10’ 20‘ 20‘ 40‘ 20‘ PHOTOMETRICS Type V Square Narrow EDR-48L-110-5QN 40‘ 20‘ 10’ 20‘ 20‘ 20‘ 40’ 40’ 20‘ 40‘ 40‘ 20‘ 40’ 10’ Type V Rectangular EDR-48L-110-5R 40‘ 20‘ 1fc 40‘ Type V Square Medium EDR-48L-110-5QM 0‘ .5fc 2fc 20‘ 10’ 20‘ 20‘ 40’ 10’ 20‘ 20‘ 40’ 10’ 20‘ 20‘ 20‘ .5fc 40‘ 0‘ .5fc 2fc 40‘ 40‘ 20‘ 1fc 20‘ .5fc 4fc 1fc 2fc 20‘ 2fc 1fc 40‘ 40‘ 40‘ 4fc 2fc 1fc 40‘ 20‘ 2fc 1fc 40‘ 40‘ Drive Lane Direction 40‘ 40‘ 40‘ 20‘ 20‘ PERFORMANCE DATA 40’ 10’ 20‘ 20‘ DRIVE CURRENT 40‘ (MILLIAMPS) .5fc 40‘ 2fc # LED’S 20‘ 10’ 20‘ .5fc 1fc 1fc 5K 20‘ (5000K nominal, 70 CRI) 10’ 20‘ 20‘ 40’ 40’ SYSTEM WATTS 40‘ 24 350mA 27W 24 700mA 55W 36 700mA 80W 48 700mA 110W DISTRIBUTION 20‘ TYPE LUMENS 40‘ 3567 3490 3275 3072 3330 3309 3300 3373 6611 6468 6069 5694 6172 6132 6115 6251 9916 9702 9103 8541 9258 9198 9173 9376 13222 12936 12138 11388 12344 12264 12231 12501 4K (4000K nominal, 70 CRI) 20‘ 40‘ 2fc 2X2 4X4 5QM 5QN 5R 5W 5X3 5X5 2X2 4X4 5QM 5QN 5R 5W 5X3 5X5 2X2 4X4 5QM 5QN 5R 5W 5X3 5X5 2X2 4X4 5QM 5QN 5R 5W 5X3 5X5 40’ 20‘ 1fc .5fc 3K (3000K nominal, 70 CRI) 40‘ LPW1 B 129 126 118 111 120 119 119 122 121 119 111 104 113 113 112 115 121 119 111 105 113 113 112 115 121 118 110 104 113 112 112 114 40‘ N/A N/A 2 2 2 2 N/A N/A N/A N/A 2 3 3 3 N/A N/A N/A N/A 3 4 3 3 N/A N/A N/A N/A 3 4 3 4 N/A N/A U G LUMENS LPW1 B U G LUMENS N/A N/A 0 1 1 1 N/A N/A N/A N/A 0 1 1 1 N/A N/A N/A N/A 0 1 2 2 N/A N/A N/A N/A 0 2 2 2 N/A N/A N/A N/A 0 2 2 1 N/A N/A N/A N/A 1 2 3 1 N/A N/A N/A N/A 1 3 3 2 N/A N/A N/A N/A 2 3 3 2 N/A N/A 3640 .5fc 3561 3341 3135 3398 3376 3367 3441 3746 6600 6193 5810 6298 6257 6240 6378 10119 9900 9289 8715 9447 9386 9360 9568 13492 13200 12386 11620 12596 12514 12480 12757 131 129 121 113 123 122 122 124 124 121 114 107 116 115 114 117 124 121 114 107 116 115 115 117 123 120 113 107 116 115 114 117 N/A N/A 2 2 2 2 N/A N/A N/A N/A 2 3 3 3 N/A N/A N/A N/A 3 4 3 3 N/A N/A N/A N/A 3 4 3 4 N/A N/A N/A N/A 0 1 1 1 N/A N/A N/A N/A 0 1 1 1 N/A N/A N/A N/A 0 1 2 2 N/A N/A N/A N/A 0 2 2 2 N/A N/A N/A N/A 0 2 2 1 N/A N/A N/A N/A 1 2 3 1 N/A N/A N/A N/A 1 3 3 2 N/A N/A N/A N/A 2 3 3 2 N/A N/A 3278 3207 3010 2824 3061 3041 3033 3100 6076 5944 5578 5233 5673 5636 5621 5745 9114 8917 8367 7850 8509 8454 8431 8617 12152 11889 11156 10466 11345 11272 11241 11490 20‘ 2fc 1fc LPW1 B U 118 116 109 102 110 110 109 112 111 109 102 96 104 103 103 105 112 109 102 96 104 103 103 105 111 108 102 96 104 103 103 105 N/A N/A N/A N/A 2 0 2 1 2 1 2 1 N/A N/A N/A N/A N/A N/A N/A N/A 2 0 3 1 3 1 3 1 N/A N/A N/A N/A N/A N/A N/A N/A 3 0 4 1 3 2 3 2 N/A N/A N/A N/A N/A N/A N/A N/A 3 0 4 2 3 2 4 2 N/A N/A N/A N/A G N/A N/A 0 2 2 1 N/A N/A N/A N/A 1 2 3 1 N/A N/A N/A N/A 1 3 3 2 N/A N/A N/A N/A 2 3 3 2 N/A N/A 1 Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application. Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM EDR-XPL-SPEC ELECTRICAL DATA # OF LEDS NUMBER OF DRIVERS 24 1 24 2 36 1 48 1 60 1 DRIVE CURRENT INPUT VOLTAGE SYSTEM POWER (mA) (V) (w) 120 277 350mA 27 347 480 120 277 700mA 55 347 480 120 277 700mA 80 347 480 120 277 700mA 110 347 480 120 277 700mA 136 347 480 CURRENT (Amps) 0.2 0.1 0.1 0.1 0.5 0.2 0.2 0.1 0.7 0.3 0.2 0.2 0.9 0.4 0.3 0.2 1.1 0.5 0.4 0.3 AMBIENT TEMPERATURE 0°C 32°F 10°C 50°F 20°C 68°F 25°C 77°F LUMEN MULTIPLIER 1.02 1.01 1.00 1.00 Use these factors to determine relative lumen output for average ambient temperatures from 0-50°C (32-122°F). PROJECTED LUMEN MAINTENANCE AMBIENT TEMP. 25°C / 77°C TM-21-11 Calculated L70 60,000 100,000 (HOURS) 0.94 0.91 434,000 1 0 25,000 1.00 0.97 50,000 0.95 1 Projected per IESNA TM-21-11 Data references the extrapolated performance projections for the base model in a 25°C ambient, based on 10,000 hours of LED testing per IESNA LM-80-08. Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2015 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM