Endura Spec Sheet Xpl

2017-08-23

: Pdf Endura Spec Sheet Xpl Endura_spec_sheet_xpl spec products beacon

Open the PDF directly: View PDF PDF.
Page Count: 4

CERTIFICATIONS/LISTINGS
DIMENSIONS
PRODUCT IMAGE(S)SPECIFICATIONS
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM EDR-XPL-SPEC
Cat.#
Approvals
Job Type design . performance . technology
design . performance . technology
ENDURA
SERIES
WALL/BUILDING MOUNT
Intended Use:
The Endura is a ceiling surface mounted or pen-
dant mounted parking structure luminaire with a
eld replaceable LED light-engine & optical bezel
system. Internal components are totally enclosed
in a rain-tight and corrosion-resistant die cast
aluminum housing. The Endura Luminaire is CSA
certied and suitable for damp locations (wet
location available on request).
Construction:
• Die cast aluminum two-piece housing
• Shape of the top housing is designed as a bird
nesting deterrent
• Die cast main (thermal) housing provides
direct-heat exchange between the LED light
engine and the cool outdoor air
• Main housing is designed with heat dissipating
ns for LED thermal management without
the use of metallic screens, cages, or fans
• Main and top housings are designed to hinge
open for easy mounting and easy access
LED/Optics:
• Endura luminaire is supplied with an optical
one piece cartridge system consisting of an
LED engine, LED lamps, optics, gasket
and stainless steel bezel
• Cartridge is held together with internal brass
standoffs soldered to the board so that it can
be eld replaced as a one piece optical system
• Two-piece silicone and polycarbonate foam
gasket ensures a weather-proof seal around
each individual LED
• Endura comes standard with 70 CRI
• Cartridge assembly is available in various
lighting distributions using TIR designed acrylic
optical lenses over each LED
Electrical:
• 120V through 277V, 50 Hz to 60 Hz
• Dimming drivers are standard, but must
contact factory to request wiring leads for
purpose of external dimming controls
• Component-to-component wiring within the
luminaire may carry no more than 80%
of rated load and is certied by UL for use at
600VAC at 50°C or higher
• Plug disconnects are certied by UL for use at
600 VAC, 13A or higher. 13A rating applies
to primary (AC) side only
• Surge protection - 20kA
Controls/Options:
• Endura is available with an optional passive
infrared (PIR) motion sensor capable
of detecting motion 360° around the
luminaire. When no motion is detected for the
specied time, the Motion Response system
reduces the wattage down to a factory
preset level, reducing light level accordingly.
When motion is detected, the luminaire returns
to full wattage and full light output. Please
contact Beacon Products if project
requirements vary from the standard
congurations
• Available with Energeni for optional set
dimming, timed dimming with simple delay,
or timed dimming based on time of night. see
Energeni product page for more details
www.beaconproducts.com/products/energeni
• In addition, Endura can be specied with
SiteSync™ wireless control system
for reduction in energy and maintenance cost
while optimizing light quality 24/7. See
ordering information or visit for more details:
www.hubbell-automation.com/products/sitesync/
Installation:
• Top housing is designed with various bolt
patterns for mounting to a recessed, surface or
rigid-pendant hung ceiling junction box and
rigid stem (provided by others)
• After mounting the top housing to the junction
box, the main housing is designed to
hang and hinge closed after connecting the
male and female quick connectors
• Mounting design permits a simple retrot to
existing parking structure luminaires that utilize
surface mount or recessed junction boxes
Finish
• IFS polyester powder-coat electro-
statically applied and thermocured.
• IFS nish consists of a ve stage
iron phosphate chemical pretreatment
regimen with a polymer primer sealer,
ovendry off, and top coated with a thermoset
super TGIC polyester powder coat nish
• The nish meets the AAMA 2604
performance specication which includes
passing a 3000 hour salt spray test for
corrosion resistance and resists cracking or
loss of adhesion per ASTM D522 and resists
surface impacts of up to 160 inch-pounds
Listings:
• The luminaire shall bear a CSA label and be
marked suitable for damp locations (standard).
Luminaire may be specied for wet locations.
• This product is approved by the Florida
Fish and Wildlife Conservation Commission.
Separate Turtle Friendly spec available at:
http://www.beaconproducts.com/products/endura
Warranty:
Five year limited warranty for more information visit:
www.hubbelllighting.com/resources/warranty
Bottom Top
Side Isometric
12” sq. 5 1/2”
STEM MOUNT
ASSEMBLY
(BY OTHERS)
CAST COVER
3/4" CONDUIT
4" CAST J-BOX
ENDURA
STEM MOUNT
Cast cover
3/4” Conduit
Ceiling mount J-Box
Stem Mount
assembly
(by others)
Consult Factory
Ceiling Mount
Occupancy Sensor
Shown with SiteSync™
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM EDR-XPL-SPEC
design . performance . technology
ORDERING INFORMATION
SERIES
EDR Endura
OPTICS
5R Type V,
rectangular
5W Type V, wide
5QM Type V, square
medium
5QN Type V, square
narrow
5QW Type V, square
wide
HIGHER MOUNTING
APPLICATIONS
2X2 Type V
Concentrated
Spot
4X4 Type V
Concentrated
Narrow
5X5 Type V
Concentrated
Medium
5X3 Type V
Concentrated
Rectangular
CONTROL OPTIONS
GENI-XX5,9 Energeni
SWP6,9 SiteSync Wireless
Pre-Commission
SWPM6,7,9 SiteSync Wireless
Pre-Commission w/
Motion Detection
CCT/CRI11
3K7 3000K,
70 CRI
4K7 4000K,
70 CRI
5K7 5000K ,
70 CRI
(std.)
ENGINE-WATTS
24L-27 27 Watts - LED
array
24L-55 55 Watts - LED
array
36L-80 80 Watts - LED
array
48L-110 110 Watts -
LED array
ELECTRICAL OPTIONS
PEC Photocell, button
2PF1,2,8 Dual power feed
BPC4,8 Cold weather battery
pack
BP4,8 0° C battery pack
ORDERING EXAMPLE: EDR/36L-80/5K7/5W/UNV/GENI-02/DBT
1 Not available on 24L-27
2 Not available @347V or 480V input
3 Not available on 48L-110
4 36L-80 only
5 When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure and
instructions for setting table and options. Not available with sensor options.
6 Must specify group and zone information at time or order. See www.hubbell-automation.com/products/sitesync/
for further details.
7 Specify time delay; dimming level and mounting height.
8 Not available with SWP or SWPM control options
9 Not available with other control or sensor options
10 Specify mounting height
11 This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available at:
http://cdn.beaconproducts.com/content/products/specs/specs_files/Endura_turtle_LED_spec_sheet.pdf
SENSOR OPTIONS
MOB3,7,9 Occupancy
Sensor (33%
or 50%
dimming
OCS9,10 Occupancy
Sensor (on/off)
SiteSync Lighting Control is available from
our most popular brands in a broad range of
award-winning product families.
PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting
control option, additional information will be required to complete the order. The SiteSync Commissioning Form or
alternate schedule information must be completed. This form includes Project location, Group information, and Operating
schedules. For more detailed information please visit www.hubbell-automation.com/products/sitesync/ or
contact Hubbell Lighting tech support at (800) 345-4928.
SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens.
Examples: EDR/24L-55/4K7/5W/UNV/SWP/WHT SiteSync only
EDR/24L-55/4K7/5W/UNV/SWPM-20F/WHT SiteSync with Motion Control
MOB ORDERING INFORMATION: When ordering a fixture with a dimming occupancy sensor (MOB), please specify
the appropriate information. These settings are specified in the ordering as shown in the example below.
.EDR/24L-55/4K7/5R/UNV/MOB - _________ - __________ - _____ / GYS
1 to 30 min.33% or 50% ??
High to Dim Delay Low Level Mounting Height (ft.)
Catalog Number Description
SWUSB* SiteSync loaded on USB flash drive (Windows based only)
SWTAB* SiteSync Windows Tablet
SWBRG+SiteSync Wireless Bridge Node
* When ordering with SiteSync, one of the following interface options must be chosen and ordered
separately. Each option contains the SiteSync License, GUI and Bridge Node.
+ If needed, an additional Bridge Node can be ordered.
Accessories and Services (Ordered Separately)
VOLTAGE
UNV
120-277V
120
120V
208 208V
240
240V
277
277V
347
347V
480
480V
COLOR
DBT Dark Bronze Textured
BMT Black Matte Textured
PS Platinum Silver Smooth
WHT White Textured
CC Custom Color (RAL#)
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM EDR-XPL-SPEC
design . performance . technology
5K
(5000K nominal, 70 CRI)
4K
(4000K nominal, 70 CRI)
3K
(3000K nominal, 70 CRI)
# LED’S
DRIVE CURRENT
(MILLIAMPS)
DISTRIBUTION
TYPE
LUMENS
LPW
1
B
U
G
LUMENS
LPW
1
B
U
G
LUMENS
LPW
1
B
U
G
24 350mA 27W
2X2 3567 129 N/A N/A N/A 3640 131 N/A N/A
N/A
3278 118 N/A
N/A
N/A
4X4
3490
126
N/A
N/A
N/A
3561
129
N/A
N/A
N/A
3207
116
N/A
N/A
N/A
5QM
3275
118
2
0
0
3341
121
2
0
0
3010
109
2
0
0
5QN 3072 111 2 1 2 3135 113 2 1 2 2824 102 2 1 2
5R 3330 120 2 1 2 3398 123 2 1 2 3061 110 2 1 2
5W 3309 119 2 1 1 3376 122 2 1 1 3041 110 2 1 1
5X3
3300
119
N/A
N/A
N/A
3367
122
N/A
N/A
N/A
3033
109
N/A
N/A
N/A
5X5
3373
122
N/A
N/A
N/A
3441
124
N/A
N/A
N/A
3100
112
N/A
N/A
N/A
24 700mA 55W
2X2 6611 121 N/A N/A N/A 3746 124 N/A N/A
N/A
6076 111 N/A
N/A
N/A
4X4 6468 119 N/A N/A N/A 6600 121 N/A N/A
N/A
5944 109 N/A
N/A
N/A
5QM 6069 111 2 0 1 6193 114 2 0 1 5578 102 2 0 1
5QN
5694
104
3
1
2
5810
107
3
1
2
5233
96
3
1
2
5R
6172
113
3
1
3
6298
116
3
1
3
5673
104
3
1
3
5W 6132 113 3 1 1 6257 115 3 1 1 5636 103 3 1 1
5X3 6115 112 N/A N/A N/A 6240 114 N/A N/A
N/A
5621 103 N/A
N/A
N/A
5X5 6251 115 N/A N/A N/A 6378 117 N/A N/A
N/A
5745 105 N/A
N/A
N/A
36 700mA 80W
2X2
9916
121
N/A
N/A
N/A
10119
124
N/A
N/A
N/A
9114
112
N/A
N/A
N/A
4X4
9702
119
N/A
N/A
N/A
9900
121
N/A
N/A
N/A
8917
109
N/A
N/A
N/A
5QM 9103 111 3 0 1 9289 114 3 0 1 8367 102 3 0 1
5QN 8541 105 4 1 3 8715 107 4 1 3 7850 96 4 1 3
5R 9258 113 3 2 3 9447 116 3 2 3 8509 104 3 2 3
5W
9198
113
3
2
2
9386
115
3
2
2
8454
103
3
2
2
5X3
9173
112
N/A
N/A
N/A
9360
115
N/A
N/A
N/A
8431
103
N/A
N/A
N/A
5X5 9376 115 N/A N/A N/A 9568 117 N/A N/A
N/A
8617 105 N/A
N/A
N/A
48 700mA 110W
2X2 13222 121 N/A N/A N/A 13492 123 N/A N/A
N/A
12152 111 N/A
N/A
N/A
4X4 12936 118 N/A N/A N/A 13200 120 N/A N/A
N/A
11889 108 N/A
N/A
N/A
5QM
12138
110
3
0
2
12386
113
3
0
2
11156
102
3
0
2
5QN
11388
104
4
2
3
11620
107
4
2
3
10466
96
4
2
3
5R 12344 113 3 2 3 12596 116 3 2 3 11345 104 3 2 3
5W 12264 112 4 2 2 12514 115 4 2 2 11272 103 4 2 2
5X3 12231 112 N/A N/A N/A 12480 114 N/A N/A
N/A
11241 103 N/A
N/A
N/A
5X5
12501
114
N/A
N/A
N/A
12757
117
N/A
N/A
N/A
11490
105
N/A
N/A
N/A
1Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be
representative of the configurations shown. Actual performance may differ as a result of end-user environment and application.
PERFORMANCE DATA
Type V Square Medium
EDR-48L-110-5QM
Type V Square Narrow
EDR-48L-110-5QN
Type V Rectangular
EDR-48L-110-5R
PHOTOMETRICS
40’
40‘
20‘
20‘
20‘
1fc
2fc
40‘
.5fc
20‘
40‘
10’
40’
40‘
20‘
20‘
4fc
40‘
2fc 1fc
20‘
40‘
20‘
10’
40’
20‘
20‘
2fc 40‘
1fc
.5fc
20‘
40‘
20‘
40‘
10’
40’
40‘
20‘
20‘
20‘
2fc
40‘
1fc
.5fc
20‘
40
‘
10’
40’
40‘
20‘
20‘
20‘
1fc
2fc
40‘
.5fc
20‘
40‘
10’
40’
40‘
20‘
20‘
4fc
40‘
2fc 1fc
20‘
40‘
20‘
10’
40’
20‘
20‘
2fc 40‘
1fc
.5fc
20‘
40‘
20‘
40‘
10’
40’
40‘
20‘
20‘
20‘
2fc
40‘
1fc
.5fc
20‘
40
‘
10’
Drive Lane Direction
40’
40‘
20‘
20‘
20‘
1fc
2fc
40‘
.5fc
20‘
40‘
10’
40’
40‘
20‘
20‘
4fc
40‘
2fc 1fc
20‘
40‘
20‘
10’
40’
20‘
20‘
2fc 40‘
1fc
.5fc
20‘
40‘
20‘
40‘
10’
40’
40‘
20‘
20‘
20‘
2fc
40‘
1fc
.5fc
20‘
40
‘
10’
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2015 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 18, 2017 8:30 AM
design . performance . technology
ELECTRICAL DATA
AMBIENT TEMPERATURE
LUMEN MULTIPLIER
0°C
32°F
1.02
10°C
50°F
1.01
20°C
68°F
1.00
25°C
77°F
1.00
Use these factors to determine relative lumen output for average ambient
temperatures from 0-50°C (32-122°F).
# OF LEDS
NUMBER
OF
DRIVERS
DRIVE
CURRENT
(mA)
INPUT VOLTAGE
(V)
SYSTEM POWER
(w)
CURRENT
(Amps)
24 1350mA
120
27
0.2
277
0.1
347
0.1
480
0.1
24 2700mA
120
55
0.5
277
0.2
347
0.2
480
0.1
36 1700mA
120
80
0.7
277
0.3
347
0.2
480
0.2
48 1700mA
120
110
0.9
277
0.4
347
0.3
480
0.2
60 1700mA
120
136
1.1
277
0.5
347
0.4
480
0.3
PROJECTED LUMEN MAINTENANCE
AMBIENT
TEMP. 025,000 50,000
1
TM-21-11
60,000 100,000
Calculated L70
(HOURS)
25°C / 77°C 1.00 0.97 0.95 0.94 0.91 434,000
1 Projected per IESNA TM-21-11
Data references the extrapolated performance projections for the base model in a 25°C
ambient, based on 10,000 hours of LED testing per IESNA LM-80-08.

Navigation menu