FD961025H01 FCC Certification
2016-04-11
: Pdf Fcc Certification FCC_Certification CertsReports 522328 ProductFiles
Open the PDF directly: View PDF 
.
Page Count: 25
| Download | |
| Open PDF In Browser | View PDF |
FCC DoC TEST REPORT REPORT NO. : FD961025H01 MODEL NO. : GA-1325E, WFN-49, LCS-8037TXR2, ENLGA-1320T RECEIVED : Oct. 25, 2007 TESTED : Nov. 01, 2007 ISSUED : Nov 05, 2007 APPLICANT : NETRONIX , INC. ADDRESS : No. 945, Boai St., Jubei City, Hsin-Chu,302,Taiwan, R.O.C. ISSUED BY : Advance Data Technology Corporation LAB LOCATION : No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan. This test report consists of 25 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: FD961025H01 1 Report Format Version 2.0.6 Table of Contents 1 CERTIFICATION ............................................................................................. 3 2 SUMMARY OF TEST RESULTS..................................................................... 4 2.1 MEASUREMENT UNCERTAINTY .................................................................. 4 3 GENERAL INFORMATION ............................................................................. 5 3.1 3.2 3.3 3.4 GENERAL DESCRIPTION OF EUT................................................................ 5 GENERAL DESCRIPTION OF TEST MODE .................................................. 5 DESCRIPTION OF SUPPORT UNITS............................................................ 6 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 7 4 EMISSION TEST............................................................................................. 8 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 CONDUCTED EMISSION MEASUREMENT .................................................. 8 LIMITS OF CONDUCTED EMISSION MEASUREMENT................................ 8 TEST INSTRUMENTS .................................................................................... 8 TEST PROCEDURE ....................................................................................... 9 DEVIATION FROM TEST STANDARD ........................................................... 9 TEST SETUP ................................................................................................ 10 EUT OPERATING CONDITIONS...................................................................11 TEST RESULTS............................................................................................ 12 RADIATED EMISSION MEASUREMENT ..................................................... 14 LIMITS OF RADIATED EMISSION MEASUREMENT................................... 14 TEST INSTRUMENTS .................................................................................. 15 TEST PROCEDURE ..................................................................................... 16 DEVIATION FROM TEST STANDARD ......................................................... 16 TEST SETUP ................................................................................................ 17 EUT OPERATING CONDITIONS.................................................................. 17 TEST RESULTS............................................................................................ 18 5 PHOTOGRAPHS OF THE TEST CONFIGURATION.................................... 22 6 INFORMATION ON THE TESTING LABORATORIES .................................. 24 7 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ............................................................ 25 Report No.: FD961025H01 2 Report Format Version 2.0.6 1 CERTIFICATION PRODUCT : BRAND NAME : MODEL NO.: TESTED : TEST SAMPLE : APPLICANT : STANDARDS : Gigabit Ethernet PCI Adapter NETRONIX, ViSTOR, Longshine, Encore GA-1325E, WFN-49, LCS-8037TXR2, ENLGA-1320T Nov. 01, 2007 MASS-PRODUCTION NETRONIX , INC. FCC Part 15: 2007, Subpart B, Class B (section 15.31, 15.107 and 15.109) ANSI C63.4-2003 (section 7 and 8) ICES-003: 2004, Class B (section 4 and 5) The above equipment (Model: GA-1325E) has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Nov 05, 2007 , DATE: Nov 05, 2007 , DATE: Nov 05, 2007 ( Midoli Peng, Specialist ) TECHNICAL ACCEPTANCE : Responsible for RF ( Ivan Peng, Deputy Manager ) APPROVED BY : ( May Chen, Deputy Manager ) Report No.: FD961025H01 3 Report Format Version 2.0.6 2 SUMMARY OF TEST RESULTS Standard FCC Part 15, Subpart B, Class B ICES-003, Class B Test Type Conducted Test Radiated Test Result Remarks PASS Meets Class B Limit Minimum passing margin is -15.78 dB at 0.202 MHz PASS Meets Class B Limit Minimum passing margin is -0.70 dB at 250.01 MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions(30MHz-1GHz) Radiated emissions(1GHz-18GHz) Report No.: FD961025H01 Value 2.41 dB 3.36 dB 2.25 dB 4 Report Format Version 2.0.6 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Gigabit Ethernet PCI Adapter MODEL NO. GA-1325E, WFN-49, LCS-8037TXR2, ENLGA-1320T POWER SUPPLY DC 5V from host equipment POWER CORD NA DATA CABLE SUPPLIED NA I/O PORTS RJ-45 port x 1 NOTE: 1. The EUT has four brand names and two model names, which are identical to each other in all aspects except for the followings: Brand Model Name Difference NETRONIX GA-1325E ViSTOR WFN-49 For different brands (models) Longshine LCS-8037TXR2 Encore ENLGA-1320T From the above models, model: GA-1325E was selected as representative model for the test and its data was recorded in this report. 2. The EUT was pre-tested under the following modes: Pre-test Mode Mode A Communication speed Mode B 100 Mbps 10 Mbps Mode C 1000 Mbps From the above modes, the worst cases were found in Mode C. Therefore only the test data of the modes were recorded in this report. 3. For a more detailed features description, please refer to the manufacturer's specifications or the User's Manual. 3.2 GENERAL DESCRIPTION OF TEST MODE The EUT was tested under following test mode: Test Mode Communication speed Mode 1 1000 Mbps Report No.: FD961025H01 5 Report Format Version 2.0.6 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product PERSONAL 1 COMPUTER Brand Model No. Serial No. FCC ID DELL DCSM 294QL1S FCC DoC 2 LCD MONITOR DELL 2007FPb 3 4 5 6 EPSON ACEEX DELL DELL LQ-300+ 1414 SK-8115 M056UOA CN-0DC2144663363V-12W S DCGY017097 980020560 MY-0J4635-71619-67V-0349 FOROOSNB DELL DCSM G84QL1S ADI DELL DELL CM100 SK-8115 M056UOA 026058T10200636 A FCC DoC MY-0J4635-71619-67V-0113 FCC DoC FOROOBSN FCC DoC NETRONIX GA-1325E NA 7 8 9 10 11 PRINTER MODEM KEYBOARD MOUSE PERSONAL COMPUTER LCD MONITOR KEYBOARD MOUSE Gigabit Ethernet PCI Adapter FCC DoC FCC DoC IFAXDM1414 FCC DoC FCC DoC FCC DoC NA No. Signal cable description 1 NA 2 1.8 m braid shielded wire, terminated with VGA connector via metallic frame. 3 1.8 m braid shielded wire, terminated with DB25 connector via metallic frame, w/o core. 4 1.0 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame, w/o core. 5 1.2 m shielded cable, terminated with PS2 connector, w/o core. 6 1.2 m shielded cable, terminated with PS2 connector, w/o core. 7 NA 8 1.8 m braid shielded wire, terminated with VGA connector via metallic frame. 9 1.2 m shielded cable, terminated with PS2 connector, w/o core. 10 1.2 m shielded cable, terminated with PS2 connector, w/o core. 11 NA Note: 1. The power cords of the above support units were unshielded (1.8m). Report No.: FD961025H01 6 Report Format Version 2.0.6 3.4 CONFIGURATION OF SYSTEM UNDER TEST 3. PRINTER EUT 1. PC 4. MODEM 2. MONITOR 6. MOUSE 5. KEYBOARD UTP Cable (10m) 11. Gigabit Ethernet PCI Adapter 7. PC 8. MONITOR 10. MOUSE 9. KEYBOARD CONTROL ROOM NOTE: 1. Support units 7 ~ 11 were kept in the control room during the test. Report No.: FD961025H01 7 Report Format Version 2.0.6 4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15: 2007, Subpart B (Section: 15.107) ICES-003: 2004 (Class A: section 5.2) (Class B: section 5.3) FREQUENCY Class A (dBuV) (MHz) Quasi-peak Average 0.15 - 0.5 79 66 0.50 - 5.0 73 60 5.0 - 30.0 73 60 Class B (dBuV) Quasi-peak Average 66 - 56 56 - 46 56 46 60 50 NOTE: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED UNTIL ROHDE & SCHWARZ Test Receiver ESCS 30 100287 Mar. 06, 2008 Line-Impedance Stabilization Network(for EUT) ENV-216 100072 Oct. 20, 2008 Line-Impedance Stabilization Network(for Peripheral) KNW-407 8-1395-12 Aug. 19, 2008 RG5B/U-6m COACAB-9KHz-3 Aug. 15, 2008 0MHz 50 1 RF Cable (JETBAO) Terminator Oct. 30, 2008 Software ADT_Cond_V7.3.2 NA NA NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in ADT Shielded Room No. A. 3. The VCCI Con A Registration No. is C-817. Report No.: FD961025H01 8 Report Format Version 2.0.6 4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 7), CISPR 22 (section 9) and ICES-003: 2004 (section 4). a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels over 10dB under the prescribed limits could not be reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FD961025H01 9 Report Format Version 2.0.6 4.1.5 TEST SETUP Ve r tic a l R e f e r e n c e T e s t R e c e iv e r G r o u n d P la n e EUT 40cm 80cm L IS N H o r iz o n ta l R e fe r e n c e G r o u n d P la n e N o te : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. Report No.: FD961025H01 10 Report Format Version 2.0.6 4.1.6 EUT OPERATING CONDITIONS 1. Turn on the power of all equipment. 2. The EUT is installed in support unit 1 (PC). 3. PC ran a test program “Tfgen .exe” and “Ping .exe “to enable EUT under transmission condition continuously via UTP cable.. 4. PC sends "H" messages to monitor. Monitor scrolling "H" patterns on its screen. 5. PC sends "H" messages to printer, and the printer prints them on paper. 6. PC sends "H" messages to modem. 7. Repeat steps 2-6. 8. Repeat steps 2-3. Report No.: FD961025H01 11 Report Format Version 2.0.6 4.1.7 TEST RESULTS TEST MODE Mode 1 6dB BANDWIDTH 9 kHz INPUT POWER 120Vac, 60 Hz PHASE Line (L) TESTED BY Eagle Chen ENVIRONMENTAL 25 deg. C, 60% RH, CONDITIONS 966 hPa Freq. Corr. Reading Value [MHz] 0.201 0.271 0.338 0.877 2.611 16.496 Factor (dB) 0.40 0.36 0.33 0.30 0.33 0.83 [dB (uV)] Q.P. AV. 43.14 36.69 35.07 32.43 30.38 31.27 - No 1 2 3 4 5 6 Emission Level [dB (uV)] Q.P. AV. 43.54 37.05 35.40 32.73 30.71 32.10 - Limit Margin [dB (uV)] Q.P. AV. 63.58 53.58 61.08 51.08 59.26 49.26 56.00 46.00 56.00 46.00 60.00 50.00 (dB) Q.P. -20.04 -24.03 -23.86 -23.27 -25.29 -27.90 AV. - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD961025H01 12 Report Format Version 2.0.6 TEST MODE Mode 1 6dB BANDWIDTH 9 kHz INPUT POWER 120Vac, 60 Hz PHASE Neutral (N) TESTED BY Eagle Chen ENVIRONMENTAL 25 deg. C, 60% RH, CONDITIONS 966 hPa Freq. Corr. Reading Value [MHz] 0.202 0.267 0.338 2.310 2.658 15.359 Factor (dB) 0.40 0.37 0.33 0.40 0.40 0.81 [dB (uV)] Q.P. AV. 47.37 40.23 39.82 27.91 30.34 35.15 - No 1 2 3 4 5 6 Emission Level [dB (uV)] Q.P. AV. 47.77 40.60 40.15 28.31 30.74 35.96 - Limit Margin [dB (uV)] Q.P. AV. 63.55 53.55 61.20 51.20 59.26 49.26 56.00 46.00 56.00 46.00 60.00 50.00 (dB) Q.P. -15.78 -20.61 -19.11 -27.69 -25.26 -24.04 AV. - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD961025H01 13 Report Format Version 2.0.6 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15: 2007, Subpart B (Section: 15.109) ICES-003: 2004 (Class A: Section 5.4/Class B: Section 5.5) FOR FREQUENCY BELOW 1000 MHz (47 CFR Part 15 Subpart B) Class A (at 10m) FREQUENCY (MHz) Class B (at 3m) uV/m dBuV/m uV/m dBuV/m 30 – 88 90 39.1 100 40.0 88 – 216 150 43.5 150 43.5 216 - 960 210 46.4 200 46.0 Above 960 300 49.5 500 54.0 FOR FREQUENCY BELOW 1000 MHz (CISPR 22) Class A (at 10m) dBuV/m 40 47 FREQUENCY (MHz) 30 – 230 230 - 1000 Class B (at 10m) dBuV/m 30 37 Note: The limit for radiated test was performed according to CISPR 22, which was specified in FCC PART 15 Subpart B 15.109(g) and ICES-003 clause 7. LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz FREQUENCY (MHz) Above 1000 Class A (dBuV/m) (at 3m) Class B (dBuV/m) (at 3m) PEAK AVERAGE PEAK AVERAGE 80.0 60.0 74.0 54.0 Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dBuV/m) = 20 log Emission level (uV/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: FD961025H01 14 Report Format Version 2.0.6 FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or Upper frequency of measurement used in the device or on which the device operates or tunes (MHz) Below 1.705 1.705 – 108 108 – 500 500 – 1000 Range (MHz) 30 1000 2000 5000 th 5 harmonic of the highest frequency or 40 GHz, whichever is lower Above 1000 4.2.2 TEST INSTRUMENTS DESCRIPTION & MANUFACTURER *ADVANTEST Spectrum Analyzer *HP Pre_Amplifier *ROHDE & SCHWARZ Test Receiver *CHASE Broadband Antenna *Schwarzbeck Horn_Antenna Schwarzbeck Horn_Antenna SCHWARZBECK Biconical Antenna SCHWARZBECK Periodic Antenna *RF Switches MODEL NO. SERIAL NO. R3271A 8449B 85060311 3008A01922 CALIBRATED UNTIL July 15, 2008 Oct. 04, 2008 ESCS 30 100027 Apr. 29, 2008 CBL6112B BBHA9120 BBHA 9170 2798 D123 BBHA9170153 Aug. 10, 2008 Oct. 04, 2008 Jan. 25, 2008 VHBA9123 459 Jun. 08, 2009 UPA6108 1148 Jun. 08, 2009 MP59B M50867 July 03, 2008 9913-30M N-N STACAB-30M-1G *RF Cable(JETBAO) Aug. 10, 2008 Cable Hz ADT_Radiated_V *Software NA NA 7.6.15.7 *EMCO Antenna Tower 2075-2 9712-2124 NA *EMCO Turn Table 2081-1.53 9712-2030 NA *CORCOM AC Filter MRI2030 107/108 NA Note: 1. The calibration interval of the above test instruments is 12 months (36 months for Periodic Antenna) and the calibrations are traceable to NML/ROC and NIST/USA. 2. * = These equipment are used for the final measurement. 3. The horn antenna, HP preamplifier (model: 8449B) and Spectrum Analyzer (model: R3271A) are used only for the measurement of emission frequency above 1GHz if tested. 4. The test was performed in ADT Open Site No. A. 5. The VCCI Site Registration No. is R-782. 6. The FCC Site Registration No. is 91097. 7. The CANADA Site Registration No. is IC 4824A-1. Report No.: FD961025H01 15 Report Format Version 2.0.6 4.2.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 8), CISPR 22 (section 10) and ICES-003: 2004 (section 4). a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10-meter open field site. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters (3 meters above 1GHz) away from the interferencereceiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the turn table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the interference-receiving antenna. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FD961025H01 16 Report Format Version 2.0.6 4.2.5 TEST SETUP Ant. Tower EUT& Support Units 1-4m Variable 10m 3m-above 1GHz Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: FD961025H01 17 Report Format Version 2.0.6 4.2.7 TEST RESULTS TEST MODE Mode1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE 30-1000 MHz DETECTOR FUNCTION & BANDWIDTH Quasi-Peak, ENVIRONMENTAL CONDITIONS TESTED BY Max Tseng 23 deg. C, 71 % RH, 966 hPa 120kHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M No. Freq. (MHz) 1 2 3 4 125.00 200.00 250.01 375.00 Emission Level (dBuV/m) 23.79 QP 20.25 QP 35.43 QP 24.22 QP 5 6 7 8 9 10 500.00 625.00 750.00 800.00 875.02 1000.00 27.17 QP 25.06 QP 25.97 QP 27.55 QP 29.22 QP 29.32 QP REMARKS: -6.21 -9.75 -1.57 -12.78 Antenna Height (m) 4.00 H 4.00 H 4.00 H 2.40 H Table Angle (Degree) 291 179 121 309 Raw Value (dBuV) 10.90 8.95 21.83 6.86 Correction Factor (dB/m) 12.89 11.30 13.60 17.36 -9.83 -11.94 -11.03 -9.45 -7.78 -7.68 1.60 H 1.42 H 1.00 H 1.00 H 1.00 H 1.00 H 145 155 329 42 94 346 6.87 1.78 0.72 1.42 1.90 0.98 20.30 23.28 25.25 26.13 27.32 28.34 Limit (dBuV/m) Margin (dB) 30.00 30.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD961025H01 18 Report Format Version 2.0.6 TEST MODE Mode1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE 30-1000 MHz DETECTOR FUNCTION & BANDWIDTH Quasi-Peak, ENVIRONMENTAL CONDITIONS TESTED BY Max Tseng 23 deg. C, 71 % RH, 966 hPa 120kHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M No. Freq. (MHz) 1 2 3 4 5 125.01 250.01 300.02 375.02 500.02 Emission Level (dBuV/m) 28.99 QP 36.30 QP 25.72 QP 28.70 QP 28.76 QP 6 7 8 9 10 600.00 625.03 750.00 875.00 1000.00 27.75 QP 25.34 QP 27.74 QP 28.61 QP 29.62 QP REMARKS: -1.01 -0.70 -11.28 -8.30 -8.24 Antenna Height (m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V Table Angle (Degree) 19 329 149 60 243 Raw Value (dBuV) 16.10 22.70 10.42 11.33 8.46 Correction Factor (dB/m) 12.89 13.60 15.30 17.37 20.30 -9.25 -11.66 -9.26 -8.39 -7.38 2.58 V 2.48 V 2.15 V 1.87 V 1.57 V 19 304 196 28 246 4.86 2.06 2.49 1.29 1.28 22.89 23.28 25.25 27.32 28.34 Limit (dBuV/m) Margin (dB) 30.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD961025H01 19 Report Format Version 2.0.6 TEST MODE Mode1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE 1000-2000 MHz DETECTOR FUNCTION & BANDWIDTH Peak(PK)/ Average(AV), 1 MHz ENVIRONMENTAL CONDITIONS TESTED BY Max Tseng 23 deg. C, 71 % RH, 966 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M No. Freq. (MHz) 1 2 3 4 1250.00 1250.00 1500.00 1500.00 REMARKS: Emission Level (dBuV/m) 55.80 PK 34.10 AV 54.60 PK 35.20 AV Limit (dBuV/m) Margin (dB) 74.00 54.00 74.00 54.00 -18.20 -19.90 -19.40 -18.80 Antenna Height (m) 1.00 H 1.00 H 1.46 H 1.46 H Table Angle (Degree) 241 241 344 344 Raw Value (dBuV) 25.68 3.98 23.39 3.99 Correction Factor (dB/m) 30.12 30.12 31.21 31.21 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD961025H01 20 Report Format Version 2.0.6 TEST MODE Mode1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE 1000-2000 MHz DETECTOR FUNCTION & BANDWIDTH Peak(PK)/ Average(AV), 1 MHz ENVIRONMENTAL CONDITIONS TESTED BY Max Tseng 23 deg. C, 71 % RH, 966 hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M No. Freq. (MHz) 1 2 3 4 1250.00 1250.00 1500.00 1500.00 REMARKS: Emission Level (dBuV/m) 56.10 PK 34.80 AV 55.50 PK 36.30 AV Limit (dBuV/m) Margin (dB) 74.00 54.00 74.00 54.00 -17.90 -19.20 -18.50 -17.70 Antenna Height (m) 1.00 V 1.00 V 1.49 V 1.49 V Table Angle (Degree) 114 114 92 92 Raw Value (dBuV) 25.98 4.68 24.29 5.09 Correction Factor (dB/m) 30.12 30.12 31.21 31.21 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD961025H01 21 Report Format Version 2.0.6 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: FD961025H01 22 Report Format Version 2.0.6 RADIATED EMISSION TEST Report No.: FD961025H01 23 Report Format Version 2.0.6 6 INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025: USA Germany Japan Norway Canada R.O.C. Netherlands Singapore Russia FCC, UL, A2LA TUV Rheinland VCCI NEMKO INDUSTRY CANADA, CSA TAF, BSMI, NCC Telefication GOST-ASIA (MOU) CERTIS (MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Tel: 886-2-26052180 Fax: 886-2-26052943 Hsin Chu EMC/RF Lab: Tel: 886-3-5935343 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service@adt.com.tw Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: FD961025H01 24 Report Format Version 2.0.6 7 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. Report No.: FD961025H01 25 Report Format Version 2.0.6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Create Date : 2007:11:07 16:36:05+08:00 Creator Tool : pdfFactory Pro www.ahasoft.com.tw/FinePrint Modify Date : 2007:11:07 16:40:58+08:00 Metadata Date : 2007:11:07 16:40:58+08:00 Format : application/pdf Creator : midoli Title : FD961025H01.doc Producer : pdfFactory Pro 3.10 (Windows XP Professional Chinese) Document ID : uuid:db1edc26-26c5-4898-8603-433567d36607 Instance ID : uuid:cb4c7d0d-efdd-4655-8344-408dfa7440e9 Page Count : 25 Author : midoliEXIF Metadata provided by EXIF.tools