Grant UK Aerona3 Installation And Servicing Instructions DOC 0109 Rev 1.1 May 2016

• Contents
• 1 - Introduction
  • 1.1 - General
  • 1.2 - Outputs
  • 1.3 - Main Components
  • 1.4 - Planning Permission
  • 1.5 - DNO Application
  • 1.6 - Servicing
  • 1.7 - Important Advice
  • 1.8 - Product Contents
  • 1.9 - Heat Pump Components
• 2 - Technical Data
  • 2.1 - Heat Pump Technical Data
  • 2.2 - Mains Supply Cable
  • 2.3 - Heat Pump Dimensions
  • 2.4 - Remote Controller Dimensions
• 3 - Installation Information
  • 3.1 - Introduction
  • 3.2 - Heating System Design Criteria
  • 3.3 - Regulations
  • 3.4 - Heat Pump Location
  • 3.5 - Preparation for Installation
  • 3.6 - Installing the Heat Pump
  • 3.7 - Weather Compensation
  • 3.8 - Buffer Tanks
  • 3.9 - Hydraulic Diagrams
  • 3.10 - Before you Commission
  • 3.11 - Completion
  • 3.12 - Installation Checklist
• 4 - Sealed Systems
  • 4.1 - Sealed System Requirements
  • 4.2 - Filling the Sealed System
  • 4.3 - Pressure Relief (Safety) Valve Operation
• 5 - Domestic Hot Water
  • 5.1 - Temperature Control
  • 5.2 - Heat Pump Cylinders
  • 5.3 - Legionella
  • 5.4 - Automatic DHW Boost Kit
    • 5.4.1 - Installation
    • 5.4.2 - Setting
• 6 - Electrical
  • 6.1 - Wiring Centre
  • 6.2 - Terminal PCB Input/Output
  • 6.3 - Power Supply
  • 6.4 - Tightening Torques
  • 6.5 - Solar Thermal
  • 6.6 - Connection of Heating System Controls
  • 6.7 - Connection of Remote Controller
  • 6.8 - Wiring Diagrams
  • 6.9 - System Control Wiring Diagrams
• 7 - Remote Controller
  • 7.1 - Remote Controller
  • 7.2 - Installation Requirements
  • 7.3 - Installing the Remote Controller
  • 7.4 - Connecting the Remote Controller to the Heat Pump
  • 7.5 - Buttons
  • 7.6 - Display Panel
• 8 - Operation
  • 8.1 - Heat Pump Operation
  • 8.2 - Water Pump Management
  • 8.3 - Frost Protection
  • 8.4 - ON/OFF DHW Production Remote Contact
  • 8.5 - ON/OFF Heating Remote Contact
  • 8.6 - Night Mode
  • 8.7 - Low Tariff
• 9 - Commissioning
  • 9.1 - System Setup
  • 9.2 - Setting the Day and Time
  • 9.3 - Access for Parameter Settings
  • 9.4 - Accessing the Parameter Setting Menu (User level)
  • 9.5 - Accessing the Parameter Setting Menu (Installer level)
  • 9.6 - Parameters Input/Output
  • 9.7 - Remote Controller Back Light Display Parameters
  • 9.8 - Anti-freeze Function Setting
  • 9.9 - Pump Operation and Air Bleeding from Heating System
• 10 - Servicing
  • 10.1 - General
  • 10.2 - Air Inlet and Outlet
  • 10.3 - Condensate Disposal
  • 10.4 - Heating System Connections
  • 10.5 - Heat Pump Controls
  • 10.6 - Refrigerant
  • 10.7 - Monitor Display Function
• 11 - Fault Finding
  • 11.1 - Error Code Display
  • 11.2 - Error History Display
  • 11.3 - Reset Error Code Display
  • 11.4 - Error Codes
  • 11.5 - Table of Controller PCB and Terminal PCB Alarms
  • 11.6 - Error Codes and PCB Alarm Figures and Tables
• 12 - Spare Parts
  • 12.1 - Exploded Diagram - HPID6
  • 12.2 - Spare Parts List - HPID6
  • 12.3 - Exploded Diagram - HPID10
  • 12.4 - Spare Parts List - HPID10
  • 12.5 - Exploded Diagram - HPID16
  • 12.6 - Spare Parts List - HPID16
• 13 - EC Declaration of Conformity
• 14 - Health and Safety Information
  • 14.1 - General
  • 14.2 - Refrigerant (R410A)
    • 14.2.1 - First Aid Measures
• 15 - Disposal and Recycling
• 16 - Guarantee
• Appendix A
• Notes