HCS Light HAWKDual Tech Dimming Sensor SPEC
2019-01-15
: Pdf Hcs Lighthawkdualtechdimmingsensor Spec HCS_LightHAWKDualTechDimmingSensor_SPEC spec products hba
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
LHDMMT Series Dimming Wall Switch Occupancy Sensors Project Name Catalog No. Date OCCUPANCY SENSING IntelliDAPT DAYLIGHT HARVESTING The LightHAWK2 Dimming Dual Technology Wall Switch Sensor combines passive infrared (PIR) and ultrasonic (US) technologies with the additional energy savings of 0-10V dimming. The user can set the occupied level to a predetermined level or set the sensor to activate to the last-used dimming level. With ON/OFF and Dimming Control, the user can easily adjust the light level for their area. This sensor has a coverage area of up to 1,000 square feet and 180° of detection. LHDMMT sensors feature Hubbell Controls' patented IntelliDAPT® technology, which makes all the sensor adjustment decisions automatically. Throughout the product’s lifespan, smart software analyzes the controlled area and makes digital adjustments to sensitivity and timer settings. Occupancy sensors with IntelliDAPT provide a maintenance-free install-and-forget operation. With selectable operating modes — automatic ON/OFF or manual ON/ automatic OFF, occupancy on to predetermined dimming level go to last dimming setting upon occupancy — and a built-in photosensor for automatic daylight harvesting, LHDMMT sensors are the best choice in today’s market place. Product Features Compliance and Certification • Digital dual technology passive infrared (PIR) and ultrasonic (US) sensor • IntelliDAPT self-adaptive technology—no manual adjustment required • 1 relay model for single-level switching TITLE 24 COMPLIANCE • Occupancy (auto-on) and Vacancy (manual-on) operating modes • 1,000 square-foot, 180° coverage area Dimensional Data • RhinoTuff™ vandal resistant lens • 120/277VAC and 347VAC Models • No minimum load requirement • Zero Arc Point Switching 3.38" [85.91] • Five-year warranty 2.70" [68.69] 1.70" [43.26] 1.72" [43.61] Ordering Information LHDMMTS 2 MODEL LHDMMTS LightHAWK2™ Dimming Dual Technology, Single Relay BUTTONS 2 1 N N347 WIRING Neutral (120/277V) Neutral (347V) WH IV LA GY BK COLOR White Ivory Light Almond Gray Black Blank M MODE Switchable Vacancy or Occupancy Mode Vacancy Mode Only 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2018 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 1123B 121018 Dimming Wall Switch Occupancy Sensors Coverage Pattern (15.24m) (7.9m) (6.4m) (7.3m) (8.8m) (17.1m) Wiring Diagrams COVER RELEASE CATCH LINE CIRCUIT BLACK PHOTOCELL PUSH BUTTON NEUTRAL WHITE RED VIOLET GRAY DIMMING FIXTURE BUTTON A (ON/RAISE BUTTON) BUTTON B (OFF/LOWER BUTTON) GROUND CONNECTION 2 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2018 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 1123B 121018 Dimming Wall Switch Occupancy Sensors General Specifications IntelliDAPT Technology Time Delay 3 Self-adjusting timer Self-adjusting passive infrared (PIR) and ultrasonic (US) sensitivity Automatic false-on/ false-off corrections No manual adjustments required Auto mode: 4-20 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 20 minutes Test mode: 5 seconds Passive Infrared (PIR) Quad-element pyrometer and 12-element cylindrical RhinoTuff lens Dimming 0-10V, Sink up to 30mA Photocell Natural light override range: 10-500 foot-candles Coverage 1,000 square-foot, 180° coverage area Power Requirements 120/277VAC;50/60Hz 347VAC; 50/60Hz Electrical Ratings 120VAC: 0-1000W Ballast, E-Ballast, LED, Tungsten; Motor Rating: 1/6 HP 277VAC: 0-1200W Ballast, E-Ballast, LED; Motor Rating: 1/6 HP 347VAC: 0-1500W Ballast, LED; Motor Rating: None Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95% Construction Casing- high- Impact injection-molded plastic (UL-94-5V) Impact-resistant lens Color- coded leads are 6” (152.4mm) long Wrap-around galvanized steel mounting strap Dimensions 2.70"H x 1.72"W x 1.70"D (68.69mm H x 43.61mm W x 43.26mm D) Weight 2.9 oz (82.21g) Color White; Ivory; Light Almond; Gray; Black Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately Certifications Listed UL and cUL Warranty Five-year limited 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2018 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 1123B 121018
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47 Create Date : 2018:12:19 11:21:22-05:00 Metadata Date : 2018:12:19 11:21:28-05:00 Modify Date : 2018:12:19 11:21:28-05:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Instance ID : uuid:55dbab95-c1b0-4049-a9d5-d0ebcf4d1695 Original Document ID : adobe:docid:indd:aa18d389-c425-11e0-adee-bf0cb726cb15 Document ID : xmp.id:63f1829d-020a-48fa-b011-6f4e4fde58ff Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:714c4fbb-d141-44ec-91b4-5aa7bf69ccd8 Derived From Document ID : xmp.did:e2536548-dd42-4142-b20c-c73d96e8925f Derived From Original Document ID: adobe:docid:indd:aa18d389-c425-11e0-adee-bf0cb726cb15 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:12:19 11:21:22-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 3 Creator : Adobe InDesign CC 13.1 (Macintosh)EXIF Metadata provided by EXIF.tools