HMO3000 Series Datasheet En
Hmo3000 Datasheet En HMO3000_datasheet_en HMO3000_datasheet_en original 35 attachments listing_attachments images rentogproduction
2016-07-24
: Pdf Hmo3000 Datasheet En HMO3000_datasheet_en original 34 attachments listing_attachments images
Open the PDF directly: View PDF .
Page Count: 16
Download | |
Open PDF In Browser | View PDF |
Product Brochure | 02.00 Test & Measurement R&S®HMO3000 Series Mixed Signal Oscilloscopes 300/400/500 MHz Bandwidth Precise signal analysis Intelligent user interface FFT Quick view 4 Gsamples/s sampling rate 8 Msamples memory To optimize the screen display the instrument shows and hides menus Superb FFT functionality At the push of a button the 16 most important values of the measured signal are permanently updated and displayed Product of the Year 2014 HMO3000 Winner in category Test & Measurement Setup Intuitive, multi-lingual user menu Help Context-sensitive help Math Wide range of programmable math functions Zoom Memory zoom up to 250,000 : 1 Analog channels Vertical sensitivity of up to 1 mV/div. Serial Bus Analysis Always with MSO functionality Bus signal source Fan Hardware-based triggering and decoding (optional) Analyze analog channels plus up to an additional 16 digital channels To create SPI, I2C, UART and counter signals Maximum noise reduction by temperature-controlled fan 2 Rohde & Schwarz R&S®HMO3000 Series At a glance Systems that are constantly becoming faster and more complex lead to ever higher demands on the required measurement technology. The oscilloscope series R&S®HMO3000 offers the solution for current requirements in regards to bandwidth, sampling rate and memory depth. Its bandwidth of up to 500 MHz allows to set a new milestone in the development of high-performance mixedsignal oscilloscopes at an attractive price. The 2- and 4-channel instruments provide bandwidths of 300, 400 and 500 MHz, a sampling rate of 4 GSa/s and a memory depth of 8 MPts. The instruments are rounded off with a standard inclusion of the MSO functionality and several options for serial bus analysis to meet all requirements of modern development designs. Rohde & Schwarz is offering the new R&S®HMO3000 series exclusively as mixedsignal oscilloscopes. It is also unnecessary to initially activate the mixed-signal functions via software options, as is the case with other suppliers. The low capacitance logic probe R&S®HO3508 (also available as double pack HO3516) is optional. It allows the analysis of up to 16 logic channels with a sampling rate of 1 GSa/s. The logic probe is not linked to a specific instrument serial number. This allows its use with all digital oscilloscope of the R&S®HMO series. For communications between embedded systems and the environment the R&S®HMO3000 includes hardware-based signal triggering and decoding for all common protocols (I2C, SPI, UART, CAN and LIN). This option can be activated with an upgrade voucher at any time. The integrated three-digit digital voltmeter enables service technicians to simultaneously perform voltage measurements on all analog channels with four values totalling. The segmented memory option R&S®HOO14 enables you to divide the available memory of your R&S®HMO3000 into up to 1000 segments. This procedure allows sampling rates of 200 000 Wfm/s, which makes it possible to capture rare anomalies occurring during many short events in quick succession. For the analysis of the recorded signals, all measurement functions of the R&S®HMO are available, including the Pass/Fail function. Thanks to the FFT analysis function with 64 k test points the R&S®HMO3000 series keeps pace with significantly larger oscilloscopes also in the frequency domain. The time domain signal, measurement window, FFT analysis result are displayed together on a single screen, which makes it easier to evaluate the input waveform. The R&S®HMO3000 series offers time domain, logic, protocol and frequency analysis in a single instrument and is a member of the Rohde & Schwarz family of scope-of-the-art oscilloscopes. Rohde & Schwarz R&S®HMO3000 Series 3 Key facts Superior hardware-based acquisition for precise measurement results ❙❙ 4 Gsample/s sampling rate, 8 Msample memory depth ❙❙ High vertical sensitivity down to 1 mV/div ❙❙ Low-noise measurement due to state-of-the-art A/D converter ❙❙ High acquisition rate to identify signal faults ❙❙ Segmented memory and manually adjustable memory depth Versatile measurement functions and fast results ❙❙ Wide selection of automatic measurement functions ❙❙ QuickView: key results at the push of a button ❙❙ Mask test: a new mask can be easily created with just a few keystrokes ❙❙ FFT: the easy way to analyze the signal spectrum Logic analysis with the MSO option ❙❙ Mixed signal function as standard ❙❙ Precise triggering on signal events ❙❙ Straightforward display of digital signals ❙❙ Low test point loading due to active probe solution Serial bus analysis: hardware-based triggering and decoding ❙❙ Versatile trigger options for isolating specific data packets ❙❙ Color-coded display of decoded bus signals ❙❙ Direct export of analyzed data to USB memory drive ❙❙ Simultaneous decoding of two buses in realtime Voltmeter measurements using an oscilloscope ❙❙ Three-digit display for precise voltage measurements ❙❙ Simultaneous measurement on all analog channels of up to four voltage values totalling Future-ready investment and scalability ❙❙ Free firmware updates ❙❙ Bandwidth upgrades as required ❙❙ Serial bus analysis and segmented memory via optional software licenses Application How the R&S®HMO3000 meets your needs Engineering lab ❙❙ Adjustable memory depth ❙❙ Advanced math functions available as standard, math on math possible ❙❙ Automeasurement for 28 user-defined parameters ❙❙ Segmented memory (R&S®HOO14, R&S®HV114) ❙❙ Low-noise amplifier and A/D converter ❙❙ 1 mV/div. sensitivity ❙❙ 50 Ω/1 MΩ input impedance, switchable ❙❙ Bandwidth upgrades via software options ❙❙ Simultaneous voltmeter measurements on all analog channels ❙❙ Mixed signal option (MSO) with 16 logic channels ❙❙ Serial bus trigger and hardware-accelerated decode (R&S®HOO10/11/12, R&S®HV110/111/112) ❙❙ 7-digit hardware counter ❙❙ Superb FFT functionality ❙❙ Remote control for automated data acquisition ❙❙ Pass/fail tests based on user-defined masks with error signal output ❙❙ Automatic signal measurement at the push of a button ❙❙ USB/RS-232, Ethernet/USB or GPIB (IEEE 488) interfaces ❙❙ Fast boot time ❙❙ Low-noise, intelligent temperature management ❙❙ Extended display size through Virtual Screen technology ❙❙ DVI-D output for external display Analog circuit design Embedded debugging Model overview 500 MHz 400 MHz 300 MHz 4 channel R&S®HMO3054 R&S®HMO3044 R&S®HMO3034 2 channel R&S®HMO3052 R&S®HMO3042 R&S®HMO3032 4 Rohde & Schwarz R&S®HMO3000 Series Production environment General purpose and education 300 MHz, 400 MHz, 500 MHz Should your requirements change, then so does the R&S®HMO3000, as the 300 MHz models can be extended to 400 MHz and 500 MHz bandwidth via software upgrades whenever required. This is done with option upgrade vouchers available at your dealer. 300MHz 400MHz 500MHz HV35x ❙❙ For 300 MHz to 400 MHz: HV342 (2 channel) and HV344 (4 channel) ❙❙ For 300 MHz to 500 MHz: HV352 (2 channel) and HV354 (4 channel) ❙❙ For 400 MHz to 500 MHz: HV452 (2 channel) and HV454 (4 channel) Vouchers for bandwidth upgrades or serial bus analysis options are available at your dealer. The individual voucher number and the serial number of the instrument to be upgraded is entered at http://voucher.rohde-schwarz.com. The customer immediately receives the respective licence key which can be loaded via USB memory drive into the instrument. Standard HV34x HV45x Rohde & Schwarz R&S®HMO3000 Series 5 Always a MSO The mixed signal functionality is always included in the R&S®HMO3000 series with no software option being necessary to unlock it. 6 Rohde & Schwarz R&S®HMO3000 Series Rohde & Schwarz is offering the R&S®HMO3000 series exclusively as a mixed-signal oscilloscope. The great advantages of these instruments are best illustrated by taking a look at how ADCs (Analog Digital Converter) or DACs (Digital Analog Converter) are integrated. Optional: Logic probe R&S®HO3508 These transformer modules include an analog signal on the one side and a digital signal on the other side. As shown in the image below the latency time of a DAC can be determined with one simple cursor measurement. Therefore a MSO allows developers to devote their full attention to the circuit without having to waste energy on the measurement setup. The active logic probe R&S®HO3508 (also available as double pack HO3516) is available separately and is not linked to a specific serial number of an instrument. It can be used with any R&S®HMO oscilloscope. ❙❙ Logic probe R&S®HO3508 fits to all R&S®HMO series oscilloscopes (also available as double pack HO3516) ❙❙ No hardware lock to a specific device ❙❙ 8 logic channels available on each logic probe ❙❙ Signal threshold adjustable for each logic pod Specifications R&S®HO3508 Channels 8 Memory depth per channel 4 MPts (R&S®HMO3000 series) Input impedance 100 kΩ || <4 pF Max. input frequency 350 MHz Max. input voltage 40 V (DC + AC) Thresholds Measuring category TTL, CMOS, ECL, user-defined (-2 V to +8 V) CAT I Cable length approx. 1 m 14 bit DAC signal change Rohde & Schwarz R&S®HMO3000 Series 7 Serial Bus Analysis I2C, SPI, CAN or LIN – in terms of interaction with the outside world for embedded systems, it is safe to say that these are the most commonly used communication protocols. The R&S®HMO3000 series by Rohde & Schwarz offers you hardware-accelerated signal triggering and decoding for all of these protocols. You can upgrade your instrument via software licence keys with those functions required to develop your application: ❙❙ R&S®HOO10 / R&S®HV110: Analysis of I2C, SPI and UART/RS-232 signals on analog and logic channels ❙❙ R&S®HOO11 / R&S®HV111: Analysis of I2C, SPI and UART/RS-232 signals on all analog channels ❙❙ R&S®HOO12 / R&S®HV112: Analysis of CAN and LIN signals on analog and logic channels SPI bus signal, MISO / MOSI decoded Serial bus trigger types: ❙❙ I2C: Start, Stop, ACK, nACK, Address/Data ❙❙ SPI: Start, End, Serial Pattern (32Bit) ❙❙ UART/RS-232: Startbit, Frame Start, Symbol, Pattern HEX decoded CAN bus signal ❙❙ LIN: Frame Start, Wake Up, Identifier, Data, Error ❙❙ CAN: Frame Start, Frame End, Identifier, Data, Error I2C bus signal in zoom view 8 Rohde & Schwarz R&S®HMO3000 Series Segmented Memory The segmented memory option R&S®HOO14 enables you to divide the available acquisition memory of the R&S®HMO3000 into up to 1000 segments. This procedure allows sampling rates of 200 000 Wfm/s, which makes it possible to capture rare anomalies occurring during many short events in quick succession. Segmentation can be applied on the acquisition of analog and digital channels as well as onto the decoding of serial busses. Additionally, all measurement functions for analyzing the recorded signals are available, including the Pass/Fail function. You can upgrade to option R&S®HOO14 at any time with voucher R&S®HV114. The individual voucher number and the serial number of the instrument is entered at http://voucher.rohde-schwarz.com. Segmented Memory (R&S®HOO14, R&S®HV114) Acquisition memory divided into segments Maximum segments 1000 Minimum segment size 5 kPts Maximum segment size 1 MPts Re-arming time <3 µs Maximum acquisition rate 200 000Wfm/s Segment player Displays all recorded segments manually or automatically, all measurement functions including pass/fail can be used with recorded segments Sources all analog and digital channels, busses Rohde & Schwarz R&S®HMO3000 Series 9 Digital Voltmeter (DVM) The three-digit digital voltmeter is also a standard feature which makes the work of service technicians in particular easier. Voltage measurements can be performed simultaneously for all analog channels. Integrated into a single compact device it allows you to keep your workplace tidy. ❙❙ Perform measurements simultaneously on all analog channels, with up to four freely definable parameters totalling ❙❙ These options are available: DC, DCrms, ACrms, Crest Factor, Vpp, Vp+, Vp❙❙ You decide about the position of the values on the screen DVM on two analog channels with four measurement parameters HZ15 probe (sold separately) 10 Rohde & Schwarz R&S®HMO3000 Series Ramp waveform measured by DVM Frequency Analysis Due to the outstanding FFT functionality of the R&S®HMO series oscilloscopes signals can also be analysed in the frequency domain with up to 65,536 points. Additional practical tools such as cursor measurement as well as peak-detect functions are also available. They allow engineers to complete their analysis significantly faster, also in the frequency domain. Sinusoid signal in the time domain Frequency spectrum exposes the distortion Easy analysis in frequency domain In the time domain quite often the distortion of input s ignals cannot be detected with the naked eye. For instance, an acquired sine wave signal appears to be undistorted. Only the frequency spectrum – available with just one push of a button – clearly displays additional harmonics that occur as harmonic oscillations for multiples of the basic frequency. Since FFT is also active for previously stored signals, it is possible to subsequently analyze any sections of those signals captured in single shot mode or stop mode with an adjustable window width. Rohde & Schwarz R&S®HMO3000 Series 11 R&S®HMO3002 series 2-channel mixed signal oscilloscope R&S®HMO3004 series 4-channel mixed signal oscilloscope R&S®HMO3032, R&S®HMO3034: 300 MHz R&S®HMO3042, R&S®HMO3044: 400 MHz R&S®HMO3052, R&S®HMO3054: 500 MHz Rise time (calculated, 10% to 90%) < 0.875 ns Trigger level setting R&S®HMO305x < 0.700 ns with auto level Linking peak value and trigger level, adjustable between peak values of a signal without auto level ±8 Div (from center of screen) external ±5 V DC gain accuracy 2 % of full scale Input sensitivity 1 mV/Div to 5 V/Div (1 MΩ and 50 Ω) Display coarse stepping 12 calibrated steps, 1-2-5 variable stepping freely between calibrated steps Screen size / type 16.5 cm (6.5 “) VGA Color Display Resolution 640 (H) x 480 (V) pixel Impedance 1 MΩ II 13 pF ±2 pF (50 Ω switchable) Backlight 500 cd/m2 (LED) Coupling DC, AC, GND Max. input voltage (derates at 20 db/decade to 5 Vrms above 100 kHz) 12 Div (600 pixel) with menu bar 10 Div (500 pixel) 0.5 Vpp to 10 Vpp R&S®HMO304x all analog channels without menu bar 0.8 Div external < 1.166 ns from firmware version 5.520 Display range in horizontal direction from 5 mV/Div R&S®HMO303x 1 MΩ 200 Vp 50 Ω 5 Vrms, max. 30 Vp Trigger coupling Auto level 5 Hz to 300/400/500 MHz AC 5 Hz to 300/400/500 MHz DC DC to 300/400/500 MHz HF 30 kHz to 300/400/500 MHz selectable filters LF DC to 5 kHz, selectable in DC and auto level mode low-pass (noise rejection) 200 MHz, selectable in AC, DC, HF and auto level mode Display range in vertical direction 8 Div (400 pixel) Position range with VirtualScreen usage 20 Div Offset control Color depth 256 colors 1 mV/Div, 2 mV/Div ±0.2 V - 8 Div x sensitivity External Trigger Input (BNC) Trace display pseudo-color, inverse intensity 5 mV/Div to 20 mV/Div ±1.0 V - 8 Div x sensitivity Impedance 1 MΩ || 14 pF ±2 pF Levels of trace brightness 32 50 mV/Div ±2.5 V - 8 Div x sensitivity Sensitivity 0.5 Vpp to 10 Vpp Button brightness light, dark 100 mV/Div, 200 mV/Div ±20 V - 8 Div x sensitivity Trigger level ±5 V 500 mV/Div to 5 V/Div ±50 V - 8 Div x sensitivity Max. input voltage 100 Vp XY/XYZ mode selectively all analog channels Coupling DC, AC selectively all analog channels Trigger/Auxiliary Output (BNC) Vertical System DSO mode ±8 Div (from center of screen) Trigger hold-off 2-channel models CH1, CH2 Inversion 4-channel models CH1, CH2, CH3, CH4 Logic Channels (with logic probe R&S®HO3508/HO3516) MSO mode Thresholds TTL, CMOS, ECL, user-defined (-2 V to +8 V) 100 kΩ || 4 pF 2-channel models CH1, CH2, POD1, POD2 Impedance 4-channel models CH1, CH2, CH3|POD1, CH4|POD2 Coupling Analog Channels Max. input voltage Y-bandwidth (-3dB) Trigger System (1mV, 2mV)/Div R&S®R&S®HMO303x: 180 MHz R&S®HMO304x, HMO305x: 200 MHz (5mV bis 5V)/Div R&S®HMO303x: 300 MHz R&S®HMO304x: 400 MHz R&S®HMO305x: 500 MHz Lower AC bandwidth Bandwidth limitation (switchable) 2 Hz about 20 MHz 40 Vp Auto Functions Pulse output for every acquisition trigger event, error output on mask violation Output level 3.8 V Pulse polarity positive Pulse width >150 ns (trigger event), >0.5 µs (mask violation) Trigger Types Edge Trigger Mode Triggers automatically also without any specific trigger event Direction increasing, decreasing, both Trigger coupling auto level AC, DC, HF Normal Triggers only on specific trigger events Switchable filters LF, noise rejection Single Triggers once on a trigger event Sources Trigger indicator Screen and panel (LED) all analog and digital channels, mains, external (AC, DC) Trigger sensitivity up to 2 mV/Div 2 mV/Div to 5 mV/Div 12 Rohde & Schwarz R&S®HMO3000 Series DC 50 ns to 17 s 1.5 Div 1.0 Div Edge A/B Direction increasing, decreasing, both Source A, B all analog channels, external (AC, DC) Frequency range DC to 300/400/500 MHz Min. signal amplitude 0.8 Div Trigger level range (seperately ±8 Div (from center of screen) adjustable with different sources) external ±5.0 V Trigger coupling State A Runt positive, negative, both 2-channel models 2 x 4 MPts or 1 x 8 MPts Sources all analog channels 4-channel models 4 x 4 MPts or 2 x 8 MPts Serial Busses (optional) Resolution 8 bit, (HiRes up to 16 bit) Bus representation Waveform arithmetics refresh, roll (loose/triggered), average (up to 1024), envelope, peak detect (500 ps), filter (low-pass, adjustable), high resolution (up to 16 bit) Record modes automatic, max. sampling rate, max. waveform update rate, specific record length (10 kPts to 2 MPts) auto level, AC, DC, HF, LF, low-pass State B same sources as state A different sources DC, HF, low-pass Trigger setting time based 16 ns to 8.589 s, resolution min. 4 ns event based 1 to 216 events Pulse Width Memory Depth Polarity Up to two busses can be analyzed at the same time. Color-coded display of decoded data in ASCII, binary, decimal and hexadecimal format. Option / Voucher codes R&S®HOO10 / R&S®HV110 Analysis of I2C, SPI, UART/RS-232 signals on analog and logic channels R&S®HOO11 / R&S®HV111 Analysis of I2C, SPI, UART/RS-232 signals on all analog channels R&S®HOO12 / R&S®HV112 Analysis of CAN and LIN signals on analog and logic channels Trigger types by protocols Polarity positive, negative I2C Start, Stop, ACK, NACK, Address/Data Functions equal, not equal, lower, higher, within/without a range SPI Start, End, Serial Pattern (32 Bit) Pulse duration 4 ns to 8.5 s, resolution min. 0.5 ns UART/RS-232 Startbit, Frame Start, Symbol, Pattern Sources all analog and digital channels Logic LIN CAN Frame Start, Wake Up, Identifier, Data, Error Frame Start, Frame End, Identifier, Data, Error boolean operators AND, OR, TRUE, FALSE time based operators equal, not equal, lower, higher, within/without a time range, timeout Duration 4 ns to 8.5 s, resolution min. 0.5 ns States H, L, X Sources all logic channels Video Time domain (Yt) main screen, time domain and zoom window Frequency domain (FFT) time domain and frequency domain window (FFT) Risetime Functions rise/fall time, both Time range 4 ns to 8.5 s, resolution min. 0.5 ns Time based operators equal, not equal, lower, higher Variance ±2 ns to ±33.5 ms, resolution 2 ns Sources all analog channels 0 to 8,59 x 109 Sa x (1/sample rate) Waveform update rate up to 5000 Wfm/s Waveform display dots, vectors, persistence afterglow Persistence afterglow min. 50 ms Segment size 5 kPts to 1 MPts max. number of segments up to 1,000 Re-arming time less than 3 µs 200.000 Wfm/s Segment player Reference signals up to 4 references Channel deskew -62.5 ns to +61.5 ns, step size 500 ps up to 250,000:1 Displays all recorded segments manually or automatically. All measurement functions including pass/fail testing can be applied on the recorded segments. all analog and digital channels, busses Time basis all analog channels, external (AC, DC) post-trigger virtual display of 20 Div for all math, logic, bus, reference signals NTSC, SECAM, PAL, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p Sources 0 to 4x106 Sa x (1/sample rate), x2 in interlaced mode VirtualScreen Supported standards line number selectable, all pre-trigger Sampling rate Memory zoom even/odd, either pulse Delay voltage (XY), intensity (Z) positive, negative Line sin(x)/x, linear, sample-hold logic channels XY/XYZ mode Sync. pulse polarity Field all analog channels Segmented Memory (optional, R&S®HOO14 / R&S®HV114) Horizontal System Functions Interpolation Sources Waveform Measurements and Operation Operation accuracy ±15.0 x 10-6 aging ±5.0 x 10-6 per year Automatic measurements Operation modes REFRESH 1 ns/Div to 50 s/Div ROLL 50 ms/Div to 50 s/Div Acquisition System Automatic search functions Realtime Sampling Rate 2-channel models 2 x 2 GSa/s or 1 x 4 GSa/s 4-channel models 4 x 2 GSa/s or 2 x 4 GSa/s logic channels 16 x 1 GSa/s menu-driven (multilingual), auto-set, help functions (multilingual) voltage (Vpp, Vp+, Vp-, Vrms, Vavg, Vmin, Vmax), amplitude, phase, frequency, period, rise/fall time (80%, 90%), overshoot (pos/neg), pulse width (pos/neg), burst width, duty cycle (pos/ neg), standard deviation, delay, crest factor, edge/pulse count (pos/neg), trigger period, trigger frequency edge, pulse, peak, rise/fall time, runt Rohde & Schwarz R&S®HMO3000 Series 13 Cursor measurements Quick measurements (QUICKVIEW) Marker voltage (V1, V2, ∆V), time (t1, t2, ∆t, 1/∆t), ratio X, ratio Y, pulse and edge count (pos/neg), peak values (Vpp, Vp+, Vp-), mean/RMS/standard deviation, duty cycle (pos/neg), burst width, rise/fall time (80%, 90%), ratio marker, crest factor voltage (Vpp, Vp+, Vp-, Vrms), frequency, period (predefined), 6 additional measure-ment functions (see automatic measurement functions) freely selectable plus statistics up to 8 freely positionable markers for easy navigation, automatic marker positioning based on search specification Frequency Analysis (FFT) Parameters FFT length Math. equation sets frequency span, center frequency, vertical scale, vertical position Realtime clock (RTC) 2 kpts, 4 kpts, 8 kpts, 16 kpts, 32 kpts, to 64 kpts Power supply Window Hanning, Hamming, Rectangular, Blackman Scale dBm, dBV, Vrms Waveform arithmetics refresh, envelope, average (up to 512) Cursor measurement Sources 2 horizontal cursors, previous/next peak search Pattern Generator Resolution 7 digit Functions Frequency range 0.5 Hz to 300/400/500 MHz probe adjust, bus signal source, counter, random pattern Accuracy ±15.0 x 10 Probe ADJ output 1 kHz, 1 MHz square wave: 1.0 Vpp (tr <4 ns) Aging ±5.0 x 10-6 per year Bus signal source (4 bit) I2C (100 kBit/s, 400 kBit/s, 1 MBit/s), SPI (100 kBit/s, 250 kBit/s, 1 MBit/s), UART (9600 Bit/s, 115,2 kBit/s, 1 MBit/s) Mask Testing Functions Pass/Fail comparison with an user-definied mask performed on waveforms Counter (4 bit) frequency: 1 kHz, 1 MHz direction: incrementing Sources all analog channels Random pattern (4 bit) frequency: 1 kHz, 1 MHz Mask definition mask enclosing acquired waveform with userdefined tolerance Interfaces Actions on mask violations during acquisiton for mass storage 2 x USB-Host, Typ A (FAT16/32) for remote control HO730 dual interface: Ethernet (RJ-45) / USB-Device (Typ B) beep, acquisition stop, screenshot, trigger pulse, automatically saving trace data Optional interfaces statistics: number of completed tests, number of passes / failed acquisition (absolute and in percent), test duration HO720 dual interface: USB-Device (Typ B) / RS-232 HO740 interface: IEEE-488 (GPIB) External monitor interface DVI-D (480 p, 60 Hz), HDMI compatible Waveform Maths Application memory Functions addition, substraction, multiplication, division Sources 2 analog channels Mathematics Functions addition, substraction, multiplication, division, minimum / maximum, square, square root, absolute value, pos/neg wave, reciprocal, inverse, log10/ln, derivation, integration, filter (lowpass/highpass) Editing formula editor, menu-driven Sources all analog channels, user-defined constants Storage location math. memory Number of formula sets 5 formula sets Number of equations 5 equations per formula set Simultaneous display of math. 1 formula set with max. 4 equations functions 14 Rohde & Schwarz R&S®HMO3000 Series 100 V to 240 V, 50 Hz to 60 Hz, CAT-II 2-channel models max. 70 W 4-channel models max. 90 W Safety in line with IEC 61010-1 (ed. 3), IEC 61010-230 (ed. 1), EN 61010-1, EN 61010-2-030 , CAN/ CSA-C22.2 No. 61010-1-12 , CAN/CSA-C22.2 No. 61010-2-030-12 ,UL Std. No. 61010-1 (3rd Edition) , UL61010-2-030 Temperature operating temperature range storage temperature range Rel. humidity +5 °C to +40 °C -20 °C to +70 °C 5 % to 80 % (without condensation) Mechanical data dimensions (W x H x D) 285 x 175 x 220 mm weight 3.6 kg All specifications at 23°C after 30 minute warm-up. Accessories included: R&S®HO732 Ethernet/USB dual interface card, line cord, printed operating manual, software-CD, 2/4 probes: R&S®RT-ZP05 (up to 500 MHz, 10:1 with attenuation ID) Bandwidth Upgrade Vouchers General Data Quickmath date and time Power consumption all analog channels Frequency Counter (hardware based) -6 AC supply on internal file system or external USB memory 8 MB for references, formulas, device settings, languages and help functions Description Voucher-Codes Bandwidth upgrade 300 MHz to 400 MHz HV342 (2-channel models) HV344 (4-channel models) Device settings on internal file system or external USB memory, available file formats: SCP, HDS Bandwidth upgrade 300 MHz to 500 MHz HV352 (2-channel models) HV354 (4-channel models) Reference waveforms on internal file system or external USB memory, available file formats: BIN (MSB/LSB), FLT (MSB/LSB), CSV, TXT, HRT Bandwidth upgrade 400 MHz to 500 MHz HV452 (2-channel models) HV454 (4-channel models) Traces on external USB memory, available file formats: BIN (MSB/LSB), FLT (MSB/LSB), CSV, TXT, HRT Save/Recall data display or acquisition data sources single or all analog channels Screenshots on external USB memory, available file formats: BMP, GIF, PNG (color, inverted, grey-scale) Bus Analysis and Segmented Memory Description Option-Code Voucher-Code I2C, SPI, UART/RS-232 on analog and digital channels R&S®HOO10 R&S®HV110 I2C, SPI, UART/RS-232 on all analog channels R&S®HOO11 R&S®HV111 CAN und LIN on analog and digital channels R&S®HOO12 R&S®HV112 Segmented memory R&S®HOO14 R&S®HV114 Recommended Accessories R&S®HO720 R&S®HO740 HZO20 HZO30 HZ115 USB-device/RS-232 dualinterface card IEEE-488 (GPIB) interface card, galvanically isolated High voltage probe 1000:1 (400 MHz, 1000 Vrms) 1 GHz active probe (0.9 pF, 1 MΩ) Differential Probe 100:1/1000:1 R&S®HO3508 HZO40 HZO41 8 channel logic probe (350 MHz, 4 pF) Active differential probe 200 MHz (10:1, 3.5 pF, 1 MΩ) Active differential probe 800 MHz (10:1, 1 pF, 200 kΩ) HZO50 HZO51 HZ99 HZ46 AC/DC current probe 30 A, DC to 100 kHz AC/DC current probe 100/1000 A, DC to 20 kHz Carrying case for protection and transport 19” rackmount kit, 4 RU Rohde & Schwarz R&S®HMO3000 Series 15 © 2015 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 E-mail: info@rohde-schwarz.com Internet: www.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. 01/16 PD 3607.0146.32 V 02.00 PDP1 en 3607014632
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Create Date : 2016:02:29 11:15:04+01:00 Metadata Date : 2016:02:29 12:27:34+01:00 Modify Date : 2016:02:29 12:27:34+01:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:78c55d4a-032e-4493-9286-08f51a0f0530 Original Document ID : xmp.did:17D59702A02968118A6D840947D357D3 Document ID : xmp.id:f7a888a8-2c72-5143-88bf-45a2b5ddc2ff Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:836f4a57-6d4e-bc4f-afea-07e6d48e2ff8 Derived From Document ID : xmp.did:FA3F3E7407206811822AFA79D327CB3D Derived From Original Document ID: xmp.did:17D59702A02968118A6D840947D357D3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:02:29 11:15:04+01:00 Format : application/pdf Title : HMO3000 Series Description : Oscilloscope Creator : Rohde & Schwarz Subject : Mixed Signal Oscilloscopes 300/400/500 MHz Bandwidth Producer : Adobe PDF Library 15.0 Trapped : False Keywords : Mixed Signal Oscilloscopes 300/400/500 MHz Bandwidth Page Count : 16 Author : Rohde & Schwarz Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools