HMO3000 Series Datasheet En
Hmo3000 Datasheet En HMO3000_datasheet_en HMO3000_datasheet_en original 35 attachments listing_attachments images rentogproduction
2016-07-24
: Pdf Hmo3000 Datasheet En HMO3000_datasheet_en original 34 attachments listing_attachments images
Open the PDF directly: View PDF 
.
Page Count: 16
R&S®HMO3000 Series
Mixed Signal Oscilloscopes
300/400/500 MHz Bandwidth
Test & Measurement
Product Brochure | 02.00
2 Rohde & Schwarz R&S®HMO3000 Series
Intelligent user interface
To optimize the screen
display the instrument
shows and hides menus
Precise signal analysis
4 Gsamples/s sampling rate
8 Msamples memory
Setup
Intuitive, multi-lingual
user menu
FFT
Superb FFT
functionality
Help
Context-sensitive help
Quick view
At the push of a button
the 16 most important
values of the measured
signal are permanently
updated and displayed
Fan
Maximum noise reduction by
temperature-controlled fan
Zoom
Memory zoom up to
250,000 : 1
Analog channels
Vertical sensitivity of up to
1 mV/div.
Bus signal source
To create SPI, I2C, UART
and counter signals
Always with MSO functionality
Analyze analog channels plus up to
an additional 16 digital channels
Math
Wide range of programmable
math functions
Serial Bus Analysis
Hardware-based triggering and
decoding (optional)
2014
Product of the Year
HMO3000
Winner in category
Test & Measurement
Rohde & Schwarz R&S®HMO3000 Series 3
At a glance
The 2- and 4-channel instruments provide bandwidths of 300, 400 and 500 MHz,
a sampling rate of 4 GSa/s and a memory depth of 8 MPts. The instruments
are rounded off with a standard inclusion of the MSO functionality and several
options for serial bus analysis to meet all requirements of modern development
designs.
Rohde & Schwarz is offering the new R&S®HMO3000 series exclusively as mixed-
signal oscilloscopes. It is also unnecessary to initially activate the mixed-sig-
nal functions via software options, as is the case with other suppliers. The low
capacitance logic probe R&S®HO3508 (also available as double pack HO3516) is
optional. It allows the analysis of up to 16 logic channels with a sampling rate of
1 GSa/s. The logic probe is not linked to a specic instrument serial number. This
allows its use with all digital oscilloscope of the R&S®HMO series.
For communications between embedded systems and the environment the
R&S®HMO3000 includes hardware-based signal triggering and decoding for all
common protocols (I2C, SPI, UART, CAN and LIN). This option can be activated
with an upgrade voucher at any time.
The integrated three-digit digital voltmeter enables service technicians to
simultaneously perform voltage measurements on all analog channels with four
values totalling.
The segmented memory option R&S®HOO14 enables you to divide the available
memory of your R&S®HMO3000 into up to 1000 segments. This procedure all-
ows sampling rates of 200 000 Wfm/s, which makes it possible to capture rare
anomalies occurring during many short events in quick succession. For the ana-
lysis of the recorded signals, all measurement functions of the R&S®HMO are
available, including the Pass/Fail function.
Thanks to the FFT analysis function with 64 k test points the R&S®HMO3000
series keeps pace with signicantly larger oscilloscopes also in the frequency
domain. The time domain signal, measurement window, FFT analysis result are
displayed together on a single screen, which makes it easier to evaluate the input
waveform.
The R&S®HMO3000 series offers time domain, logic, protocol and frequency
analysis in a single instrument and is a member of the Rohde & Schwarz family of
scope-of-the-art oscilloscopes.
Systems that are constantly becoming faster and more complex lead to ever
higher demands on the required measurement technology. The oscilloscope se-
ries R&S®HMO3000 offers the solution for current requirements in regards to
bandwidth, sampling rate and memory depth. Its bandwidth of up to 500 MHz
allows to set a new milestone in the development of high-performance mixed-
signal oscilloscopes at an attractive price.
4 Rohde & Schwarz R&S®HMO3000 Series
Model overview
500 MHz 400 MHz 300 MHz
4 channel R&S®HMO3054 R&S®HMO3044 R&S®HMO3034
2 channel R&S®HMO3052 R&S®HMO3042 R&S®HMO3032
Key facts
Superior hardware-based acquisition for precise measurement results
❙4 Gsample/s sampling rate, 8 Msample memory depth
❙High vertical sensitivity down to 1 mV/div
❙Low-noise measurement due to state-of-the-art A/D converter
❙High acquisition rate to identify signal faults
❙Segmented memory and manually adjustable memory depth
Versatile measurement functions and fast results
❙Wide selection of automatic measurement functions
❙QuickView: key results at the push of a button
❙Mask test: a new mask can be easily created with just a few keystrokes
❙FFT: the easy way to analyze the signal spectrum
Logic analysis with the MSO option
❙Mixed signal function as standard
❙Precise triggering on signal events
❙Straightforward display of digital signals
❙Low test point loading due to active probe solution
Serial bus analysis: hardware-based triggering and decoding
❙ Versatile trigger options for isolating specic data packets
❙Color-coded display of decoded bus signals
❙Direct export of analyzed data to USB memory drive
❙Simultaneous decoding of two buses in realtime
Application How the R&S®HMO3000 meets your needs
Engineering lab ❙Adjustable memory depth
❙Advanced math functions available as standard, math on math possible
❙Automeasurement for 28 user-defined parameters
❙Segmented memory (R&S®HOO14, R&S®HV114)
Analog
circuit design
❙Low-noise amplifier and A/D converter
❙1 mV/div. sensitivity
❙ 50 Ω/1 MΩ input impedance, switchable
❙Bandwidth upgrades via software options
❙Simultaneous voltmeter measurements on all analog channels
Embedded
debugging
❙Mixed signal option (MSO) with 16 logic channels
❙Serial bus trigger and hardware-accelerated decode (R&S®HOO10/11/12,
R&S®HV110/111/112)
❙7-digit hardware counter
❙Superb FFT functionality
Production
environment
❙Remote control for automated data acquisition
❙Pass/fail tests based on user-defined masks with error signal output
❙Automatic signal measurement at the push of a button
❙USB/RS-232, Ethernet/USB or GPIB (IEEE 488) interfaces
General
purpose and
education
❙Fast boot time
❙Low-noise, intelligent temperature management
❙Extended display size through Virtual Screen technology
❙DVI-D output for external display
Voltmeter measurements using an oscilloscope
❙Three-digit display for precise voltage measurements
❙Simultaneous measurement on all analog channels of up to four voltage
values totalling
Future-ready investment and scalability
❙ Free rmware updates
❙Bandwidth upgrades as required
❙Serial bus analysis and segmented memory via optional software licenses
HV34xStandard
HV35x
HV45x
500MHz400MHz300MHz
Rohde & Schwarz R&S®HMO3000 Series 5
300 MHz, 400 MHz, 500 MHz
Should your requirements change, then so does the R&S®HMO3000, as the
300 MHz models can be extended to 400 MHz and 500 MHz bandwidth via
software
upgrades whenever required. This is done with option upgrade vouchers
available at your dealer.
❙For 300 MHz to 400 MHz: HV342 (2 channel) and HV344 (4 channel)
❙For 300 MHz to 500 MHz: HV352 (2 channel) and HV354 (4 channel)
❙For 400 MHz to 500 MHz: HV452 (2 channel) and HV454 (4 channel)
Vouchers for bandwidth upgrades or serial bus analysis options are available at
your dealer. The individual voucher number and the serial number of the
instrument to be upgraded is entered at http://voucher.rohde-schwarz.com. The
customer immediately receives the respective licence key which can be loaded
via USB memory drive into the instrument.
6 Rohde & Schwarz R&S®HMO3000 Series
Always a MSO
The mixed signal functionality is always included in the R&S®HMO3000 series
with no software option being necessary to unlock it.
Rohde & Schwarz R&S®HMO3000 Series 7
Optional: Logic probe R&S®HO3508
❙ Logic probe R&S®HO3508 ts to all
R&S®HMO series oscilloscopes
(also available as double pack HO3516)
❙ No hardware lock to a specic device
❙8 logic channels available on each logic probe
❙Signal threshold adjustable for each logic pod
Specications R&S®HO3508
Channels 8
Memory depth per channel 4 MPts (R&S®HMO3000 series)
Input impedance 100 kΩ || <4 pF
Max. input frequency 350 MHz
Max. input voltage 40 V (DC + AC)
Thresholds TTL, CMOS, ECL, user-dened
(-2 V to +8 V)
Measuring category CAT I
Cable length approx. 1 m
Rohde & Schwarz is offering the R&S®HMO3000 series exclusively as a mixed-signal
oscilloscope. The great advantages of these instruments are best illustrated by taking a look
at how ADCs (Analog Digital Converter) or DACs (Digital Analog Converter) are integrated.
These transformer modules include an analog signal on the one side and a digital signal on
the other side. As shown in the image below the latency time of a DAC can be determined
with one simple cursor measurement. Therefore a MSO allows developers to devote their full
attention to the circuit without having to waste energy on the measurement setup.
The active logic probe R&S®HO3508 (also available as double pack HO3516) is available
separately and is not linked to a specic serial number of an instrument. It can be used with
any R&S®HMO oscilloscope.
14 bit DAC signal change
8 Rohde & Schwarz R&S®HMO3000 Series
Serial Bus Analysis
I2C, SPI, CAN or LIN – in terms of interaction with the outside world for embedded systems, it is safe to
say that these are the most commonly used communication protocols. The R&S®HMO3000 series by
Rohde & Schwarz offers you hardware-accelerated signal triggering and decoding for all of these
protocols. You can upgrade your instrument via software licence keys with those functions required to
develop your application:
❙R&S®HOO10 / R&S®HV110: Analysis of I2C, SPI and UART/RS-232 signals on analog and logic channels
❙R&S®HOO11 / R&S®HV111: Analysis of I2C, SPI and UART/RS-232 signals on all analog channels
❙R&S®HOO12 / R&S®HV112: Analysis of CAN and LIN signals on analog and logic channels
Serial bus trigger types:
❙I2C: Start, Stop, ACK, nACK,
Address/Data
❙SPI: Start, End, Serial Pattern (32Bit)
❙UART/RS-232: Startbit, Frame Start,
Symbol, Pattern
❙LIN: Frame Start, Wake Up,
Identier, Data, Error
❙CAN: Frame Start, Frame End,
Identier, Data, Error
SPI bus signal, MISO / MOSI decoded
HEX decoded CAN bus signal
I2C bus signal in zoom view
Rohde & Schwarz R&S®HMO3000 Series 9
Segmented Memory
The segmented memory option R&S®HOO14 enables you to divide
the available acquisition memory of the R&S®HMO3000 into up to
1000 segments.
This procedure allows sampling rates of 200 000 Wfm/s, which
makes it possible to capture rare anomalies occurring during many
short events in quick succession.
Segmentation can be applied on the acquisition of analog and
digital channels as well as onto the decoding of serial busses.
Additionally, all measurement functions for analyzing the recorded
signals are available, including the Pass/Fail function.
You can upgrade to option R&S®HOO14 at any time with voucher
R&S®HV114. The individual voucher number and the serial number
of the instrument is entered at http://voucher.rohde-schwarz.com.
Segmented Memory (R&S®HOO14, R&S®HV114)
Acquisition memory divided into segments
Maximum segments 1000
Minimum segment size 5 kPts
Maximum segment size 1 MPts
Re-arming time <3 µs
Maximum acquisition rate 200 000Wfm/s
Segment player Displays all recorded segments manually or
automatically, all measurement functions including
pass/fail can be used with recorded segments
Sources all analog and digital channels, busses
10 Rohde & Schwarz R&S®HMO3000 Series
Digital Voltmeter (DVM)
The three-digit digital voltmeter is also a standard feature which makes the work
of service technicians in particular easier. Voltage measurements can be
performed simultaneously for all analog channels. Integrated into a single
compact device it allows you to keep your workplace tidy.
❙Perform measurements simultaneously on all analog channels, with up to
four freely denable parameters totalling
❙These options are available: DC, DCrms, ACrms, Crest Factor, Vpp, Vp+, Vp-
❙You decide about the position of the values on the screen
DVM on two analog channels with four measurement parameters
Ramp waveform measured by DVM
HZ15 probe
(sold separately)
Rohde & Schwarz R&S®HMO3000 Series 11
Frequency Analysis
Due to the outstanding FFT functionality of the R&S®HMO series
oscilloscopes signals can also be analysed in the frequency domain with
up to 65,536 points. Additional practical tools such as cursor
measurement as well as peak-detect functions are also available. They
allow engineers to complete their analysis signicantly faster, also in the
frequency domain.
Easy analysis in frequency domain
In the time domain quite often the distortion of input signals cannot be
detected with the naked eye. For instance, an acquired sine wave signal
appears to be undistorted. Only the frequency spectrum – available with
just one push of a button – clearly displays additional harmonics that
occur as harmonic oscillations for multiples of the basic frequency.
Since FFT is also active for previously stored signals, it is possible to
subsequently analyze any sections of those signals captured in single
shot mode or stop mode with an adjustable window width.
Sinusoid signal in the time domain Frequency spectrum exposes the distortion
12 Rohde & Schwarz R&S®HMO3000 Series
R&S®HMO3002 series 2-channel mixed signal oscilloscope
R&S®HMO3004 series 4-channel mixed signal oscilloscope
R&S®HMO3032, R&S®HMO3034: 300 MHz
R&S®HMO3042, R&S®HMO3044: 400 MHz
R&S®HMO3052, R&S®HMO3054: 500 MHz
from rmware version 5.520
Display
Screen size / type 16.5 cm (6.5 “) VGA Color Display
Resolution 640 (H) x 480 (V) pixel
Backlight 500 cd/m2 (LED)
Display range in horizontal direction
without menu bar 12 Div (600 pixel)
with menu bar 10 Div (500 pixel)
Display range in vertical
direction
8 Div (400 pixel)
with VirtualScreen usage 20 Div
Color depth 256 colors
Trace display pseudo-color, inverse intensity
Levels of trace brightness 32
Button brightness light, dark
Vertical System
DSO mode
2-channel models CH1, CH2
4-channel models CH1, CH2, CH3, CH4
MSO mode
2-channel models CH1, CH2, POD1, POD2
4-channel models CH1, CH2, CH3|POD1, CH4|POD2
Analog Channels
Y-bandwidth (-3dB)
(1mV, 2mV)/Div R&S®R&S®HMO303x: 180 MHz
R&S®HMO304x, HMO305x: 200 MHz
(5mV bis 5V)/Div
R&S®HMO303x: 300 MHz
R&S®HMO304x: 400 MHz
R&S®HMO305x: 500 MHz
Lower AC bandwidth 2 Hz
Bandwidth limitation
(switchable)
about 20 MHz
Rise time (calculated, 10% to 90%)
R&S®HMO303x < 1.166 ns
R&S®HMO304x < 0.875 ns
R&S®HMO305x < 0.700 ns
DC gain accuracy 2 % of full scale
Input sensitivity
all analog channels 1 mV/Div to 5 V/Div (1 MΩ and 50 Ω)
coarse stepping 12 calibrated steps, 1-2-5
variable stepping freely between calibrated steps
Impedance 1 MΩ II 13 pF ±2 pF (50 Ω switchable)
Coupling DC, AC, GND
Max. input voltage (derates at 20 db/decade to 5 Vrms above
100 kHz)
1 MΩ 200 Vp
50 Ω 5 Vrms, max. 30 Vp
Position range ±8 Div (from center of screen)
Offset control
1 mV/Div, 2 mV/Div ±0.2 V - 8 Div x sensitivity
5 mV/Div to 20 mV/Div ±1.0 V - 8 Div x sensitivity
50 mV/Div ±2.5 V - 8 Div x sensitivity
100 mV/Div, 200 mV/Div ±20 V - 8 Div x sensitivity
500 mV/Div to 5 V/Div ±50 V - 8 Div x sensitivity
XY/XYZ mode selectively all analog channels
Inversion selectively all analog channels
Logic Channels (with logic probe R&S®HO3508/HO3516)
Thresholds TTL, CMOS, ECL, user-defined (-2 V to +8 V)
Impedance 100 kΩ || 4 pF
Coupling DC
Max. input voltage 40 Vp
Trigger System
Trigger Mode
Auto Triggers automatically also without any specific
trigger event
Normal Triggers only on specific trigger events
Single Triggers once on a trigger event
Trigger indicator Screen and panel (LED)
Trigger sensitivity
up to 2 mV/Div 1.5 Div
2 mV/Div to 5 mV/Div 1.0 Div
from 5 mV/Div 0.8 Div
external 0.5 Vpp to 10 Vpp
Trigger level setting
with auto level Linking peak value and trigger level, adjustable
between peak values of a signal
without auto level ±8 Div (from center of screen)
external ±5 V
Trigger coupling
Auto level 5 Hz to 300/400/500 MHz
AC 5 Hz to 300/400/500 MHz
DC DC to 300/400/500 MHz
HF 30 kHz to 300/400/500 MHz
selectable filters
LF DC to 5 kHz, selectable in DC and auto level
mode
low-pass
(noise rejection)
200 MHz, selectable in AC, DC, HF and auto
level mode
Trigger hold-off 50 ns to 17 s
External Trigger Input (BNC)
Impedance 1 MΩ || 14 pF ±2 pF
Sensitivity 0.5 Vpp to 10 Vpp
Trigger level ±5 V
Max. input voltage 100 Vp
Coupling DC, AC
Trigger/Auxiliary Output (BNC)
Functions Pulse output for every acquisition trigger event,
error output on mask violation
Output level 3.8 V
Pulse polarity positive
Pulse width
>150 ns (trigger event), >0.5 µs (mask violation)
Trigger Types
Edge
Direction increasing, decreasing, both
Trigger coupling auto level AC, DC, HF
Switchable filters LF, noise rejection
Sources all analog and digital channels, mains, external
(AC, DC)
Edge A/B
Direction increasing, decreasing, both
Source A, B all analog channels, external (AC, DC)
Frequency range DC to 300/400/500 MHz
Rohde & Schwarz R&S®HMO3000 Series 13
Min. signal amplitude 0.8 Div
Trigger level range (seperately
adjustable with different
sources)
±8 Div (from center of screen)
external ±5.0 V
Trigger coupling
State A auto level, AC, DC, HF, LF, low-pass
State B
same sources as state A
different sources DC, HF, low-pass
Trigger setting
time based 16 ns to 8.589 s, resolution min. 4 ns
event based 1 to 216 events
Pulse Width
Polarity positive, negative
Functions equal, not equal, lower, higher, within/without
a range
Pulse duration 4 ns to 8.5 s, resolution min. 0.5 ns
Sources all analog and digital channels
Logic
Functions
boolean operators AND, OR, TRUE, FALSE
time based operators equal, not equal, lower, higher, within/without
a time range, timeout
Duration 4 ns to 8.5 s, resolution min. 0.5 ns
States H, L, X
Sources all logic channels
Video
Sync. pulse polarity positive, negative
Supported standards NTSC, SECAM, PAL, PAL-M, SDTV 576i, HDTV
720p, HDTV 1080i, HDTV 1080p
Field even/odd, either
Line line number selectable, all
Sources all analog channels, external (AC, DC)
Risetime
Functions rise/fall time, both
Time range 4 ns to 8.5 s, resolution min. 0.5 ns
Time based operators equal, not equal, lower, higher
Variance ±2 ns to ±33.5 ms, resolution 2 ns
Sources all analog channels
Runt
Polarity positive, negative, both
Sources all analog channels
Serial Busses (optional)
Bus representation
Up to two busses can be analyzed at the same
time. Color-coded display of decoded data in
ASCII, binary, decimal and hexadecimal format.
Option / Voucher codes
R&S®HOO10 / R&S®HV110 Analysis of I2C, SPI, UART/RS-232 signals on
analog and logic channels
R&S®HOO11 / R&S®HV111 Analysis of I2C, SPI, UART/RS-232 signals on
all analog channels
R&S®HOO12 / R&S®HV112 Analysis of CAN and LIN signals on analog and
logic channels
Trigger types by protocols
I2C Start, Stop, ACK, NACK, Address/Data
SPI Start, End, Serial Pattern (32 Bit)
UART/RS-232 Startbit, Frame Start, Symbol, Pattern
LIN Frame Start, Wake Up, Identifier, Data, Error
CAN Frame Start, Frame End, Identifier, Data, Error
Horizontal System
Time domain (Yt) main screen, time domain and zoom window
Frequency domain (FFT) time domain and frequency domain window
(FFT)
XY/XYZ mode voltage (XY), intensity (Z)
VirtualScreen virtual display of 20 Div for all math, logic, bus,
reference signals
Reference signals up to 4 references
Channel deskew -62.5 ns to +61.5 ns, step size 500 ps
Memory zoom up to 250,000:1
Time basis
accuracy ±15.0 x 10-6
aging ±5.0 x 10-6 per year
Operation modes
REFRESH 1 ns/Div to 50 s/Div
ROLL 50 ms/Div to 50 s/Div
Acquisition System
Realtime Sampling Rate
2-channel models 2 x 2 GSa/s or 1 x 4 GSa/s
4-channel models 4 x 2 GSa/s or 2 x 4 GSa/s
logic channels 16 x 1 GSa/s
Memory Depth
2-channel models 2 x 4 MPts or 1 x 8 MPts
4-channel models 4 x 4 MPts or 2 x 8 MPts
Resolution 8 bit, (HiRes up to 16 bit)
Waveform arithmetics
refresh, roll (loose/triggered), average (up to 1024),
envelope, peak detect (500 ps), filter (low-pass,
adjustable), high resolution (up to
16 bit
)
Record modes
automatic, max. sampling rate, max. waveform
update rate, specific record length (10 kPts to
2 MPts)
Interpolation
all analog channels sin(x)/x, linear, sample-hold
logic channels pulse
Delay
pre-trigger 0 to 4x106 Sa x (1/sample rate), x2 in interlaced
mode
post-trigger 0 to 8,59 x 109 Sa x (1/sample rate)
Waveform update rate up to 5000 Wfm/s
Waveform display dots, vectors, persistence afterglow
Persistence afterglow min. 50 ms
Segmented Memory (optional, R&S®HOO14 / R&S®HV114)
Segment size 5 kPts to 1 MPts
max. number of segments up to 1,000
Re-arming time less than 3 µs
Sampling rate 200.000 Wfm/s
Segment player
Displays all recorded segments manually or
automatically. All measurement functions
including pass/fail testing can be applied on
the recorded segments.
Sources all analog and digital channels, busses
Waveform Measurements and Operation
Operation menu-driven (multilingual), auto-set, help
functions (multilingual)
Automatic measurements
voltage (Vpp, Vp+, Vp-, Vrms, Vavg, Vmin, Vmax),
amplitude, phase, frequency, period, rise/fall
time (80%, 90%), overshoot (pos/neg), pulse
width (pos/neg), burst width, duty cycle (pos/
neg), standard deviation, delay, crest factor,
edge/pulse count (pos/neg), trigger period,
trigger frequency
Automatic search functions edge, pulse, peak, rise/fall time, runt
14 Rohde & Schwarz R&S®HMO3000 Series
Accessories included:
R&S®HO732 Ethernet/USB dual interface card, line cord, printed operating
manual, software-CD, 2/4 probes: R&S®RT-ZP05 (up to 500 MHz, 10:1 with
attenuation ID)
Bandwidth Upgrade Vouchers
Description Voucher-Codes
Bandwidth upgrade 300 MHz to 400 MHz HV342 (2-channel models)
HV344 (4-channel models)
Bandwidth upgrade 300 MHz to 500 MHz HV352 (2-channel models)
HV354 (4-channel models)
Bandwidth upgrade 400 MHz to 500 MHz HV452 (2-channel models)
HV454 (4-channel models)
Bus Analysis and Segmented Memory
Description Option-Code Voucher-Code
I2C, SPI, UART/RS-232
on analog and digital channels
R&S®HOO10
R&S®HV110
I2C, SPI, UART/RS-232
on all analog channels
R&S®HOO11
R&S®HV111
CAN und LIN
on analog and digital channels
R&S®HOO12
R&S®HV112
Segmented memory R&S®HOO14 R&S®HV114
Cursor measurements
voltage (V1, V2, ∆V), time (t1, t2, ∆t, 1/∆t), ratio
X, ratio Y, pulse and edge count (pos/neg),
peak values (Vpp, Vp+, Vp-), mean/RMS/standard
deviation, duty cycle (pos/neg), burst width,
rise/fall time (80%, 90%), ratio marker, crest
factor
Quick measurements
(QUICKVIEW)
voltage (Vpp, Vp+, Vp-, Vrms), frequency, period
(predefined), 6 additional measure-ment
functions (see automatic measurement
functions) freely selectable plus statistics
Marker
up to 8 freely positionable markers for easy
navigation, automatic marker positioning
based on search specification
Frequency Counter (hardware based)
Resolution 7 digit
Frequency range 0.5 Hz to 300/400/500 MHz
Accuracy ±15.0 x 10-6
Aging ±5.0 x 10-6 per year
Mask Testing
Functions Pass/Fail comparison with an user-definied
mask performed on waveforms
Sources all analog channels
Mask definition mask enclosing acquired waveform with user-
defined tolerance
Actions
on mask violations beep, acquisition stop, screenshot, trigger
pulse, automatically saving trace data
during acquisiton
statistics: number of completed tests, number
of passes / failed acquisition (absolute and in
percent), test duration
Waveform Maths
Quickmath
Functions addition, substraction, multiplication, division
Sources 2 analog channels
Mathematics
Functions
addition, substraction, multiplication, division,
minimum / maximum, square, square root,
absolute value, pos/neg wave, reciprocal,
inverse, log10/ln, derivation, integration, filter
(lowpass/highpass)
Editing formula editor, menu-driven
Sources all analog channels, user-defined constants
Storage location math. memory
Number of formula sets 5 formula sets
Number of equations 5 equations per formula set
Simultaneous display of math.
functions
1 formula set with max. 4 equations
Frequency Analysis (FFT)
Parameters frequency span, center frequency, vertical
scale, vertical position
FFT length 2 kpts, 4 kpts, 8 kpts, 16 kpts, 32 kpts, to 64 kpts
Window Hanning, Hamming, Rectangular, Blackman
Scale dBm, dBV, Vrms
Waveform arithmetics refresh, envelope, average (up to 512)
Cursor measurement 2 horizontal cursors, previous/next peak search
Sources all analog channels
Pattern Generator
Functions probe adjust, bus signal source, counter,
random pattern
Probe ADJ output 1 kHz, 1 MHz square wave: 1.0 Vpp (tr <4 ns)
Bus signal source (4 bit)
I2C (100 kBit/s, 400 kBit/s, 1 MBit/s), SPI
(100 kBit/s, 250 kBit/s, 1 MBit/s), UART
(9600 Bit/s, 115,2 kBit/s, 1 MBit/s)
Counter (4 bit) frequency: 1 kHz, 1 MHz
direction: incrementing
Random pattern (4 bit) frequency: 1 kHz, 1 MHz
Interfaces
for mass storage 2 x USB-Host, Typ A (FAT16/32)
for remote control HO730 dual interface:
Ethernet (RJ-45) / USB-Device (Typ B)
Optional interfaces
HO720 dual interface:
USB-Device (Typ B) / RS-232
HO740 interface: IEEE-488 (GPIB)
External monitor interface DVI-D (480 p, 60 Hz), HDMI compatible
General Data
Application memory 8 MB for references, formulas, device settings,
languages and help functions
Save/Recall
Device settings on internal file system or external USB
memory, available file formats: SCP, HDS
Reference waveforms
on internal file system or external USB
memory, available file formats: BIN (MSB/LSB),
FLT (MSB/LSB), CSV, TXT, HRT
Traces
on external USB memory, available file formats:
BIN (MSB/LSB), FLT (MSB/LSB), CSV, TXT,
HRT
data display or acquisition data
sources single or all analog channels
Screenshots
on external USB memory, available file formats:
BMP, GIF, PNG
(color, inverted, grey-scale)
Math. equation sets on internal file system or external USB memory
Realtime clock (RTC) date and time
Power supply
AC supply 100 V to 240 V, 50 Hz to 60 Hz, CAT-II
Power consumption
2-channel models max. 70 W
4-channel models max. 90 W
Safety
in line with IEC 61010-1 (ed. 3), IEC 61010-2-
30 (ed. 1), EN 61010-1, EN 61010-2-030 , CAN/
CSA-C22.2 No. 61010-1-12 , CAN/CSA-C22.2
No. 61010-2-030-12 ,UL Std. No. 61010-1 (3rd
Edition) , UL61010-2-030
Temperature
operating temperature range
+5 °C to +40 °C
storage temperature range -20 °C to +70 °C
Rel. humidity 5 % to 80 % (without condensation)
Mechanical data
dimensions (W x H x D) 285 x 175 x 220 mm
weight 3.6 kg
All specifications at 23°C after 30 minute warm-up.
Recommended Accessories
R&S®HO720
USB-device/RS-232 dual-
interface card
HZ99
Carrying case for
protection and transport
HZO50
AC/DC current probe
30 A, DC to 100 kHz
HZO51
AC/DC current probe
100/1000 A, DC to 20 kHz
R&S®HO740
IEEE-488 (GPIB) interface
card, galvanically isolated
HZ46
19” rackmount kit, 4 RU
HZO20
High voltage probe 1000:1
(400 MHz, 1000 Vrms)
HZO30
1 GHz active probe
(0.9 pF, 1 MΩ)
HZ115
Differential Probe
100:1/1000:1
HZO41
Active differential probe
800 MHz (10:1, 1 pF, 200 kΩ)
HZO40
Active differential probe
200 MHz (10:1, 3.5 pF, 1 MΩ)
R&S®HO3508
8 channel logic probe (350 MHz, 4 pF)
Rohde & Schwarz R&S®HMO3000 Series 15
3607014632
PD 3607.0146.32 V 02.00 PDP1 en
© 2015 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
E-mail: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
© 2015 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
E-mail: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners. 01/16
