HP2011 HM Hinge Operated Safety Interlock Switch Instruction Sheet Manual En 201507 C369I E 01
2016-05-24
: Pdf Hp2011-Hm Manual En 201507 C369I-E-01 HP2011-HM_Manual_en_201507_C369I-E-01 Omron
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Safety, Technology & Innovation HP2008-HM & HP2011-HM Rev. 1.08 Operating Instructions for HP2008-HM and HP2011-HM Series Safety Switches Correct use Safety switch series HP2008-HM and HP2011-HM (hinge switch with hollow shaft) are used in control systems that perform safety functions, e.g. for safety guards or as position encoders. A Before safety switches are used, a risk assessment must be performed on the machine in accordance with EN 954-1, Safety of machinery. Safety related parts of control systems. General principles for design, Annex B EN 1050, Safety of machinery. Principles for risk assessment. Correct use includes compliance with the relevant requirements for installation and operation, in particular EN 954-1, Safety of machinery. Safety related parts of control systems. General principles for design EN 1088, Safety of machinery. Interlocking devices associated with guards. Principles for design and selection EN 60 204-1, Safety of machinery. Electrical equipment of machines. General requirements. Safety precautions Safety switches perform a personal protection function. Incorrect installation or tampering can lead to severe injuries to personnel. Safety switches must not be bypassed (bridging of contacts), turned away, removed or otherwise rendered ineffective. Fig. 1: Changing the actuating direction Protection against environmental effects A lasting and correct safety function requires that the actuating head must be protected against the penetration of foreign bodies such as dust, sand, blasting shot, etc. Cover the actuating head and the rating plate during painting work! Only use solvent-free cleaning agents to clean the safety switch! Switching elements and switching functions Not actuated Actuated General The safety switch HP2008-HM and HP2011-HM comply with the regulations of EN 60947-5-1, Annex K and comply with the requirements of the employers’ liability insurance associations for machines, installations and personnel protection. The letters on the rating plate represent the product's year of manufacture. Function The safety switch signals that the safety guard is closed. HP2008-11 21 22 21 22 13 14 13 14 31 21 32 22 31 21 32 22 HP2008-02 31 21 32 22 31 21 32 22 HP-2011-021 13 14 13 14 31 21 32 22 31 21 32 22 Mounting must be performed only by authorized personnel. 11 12 11 12 Safety switches must be arranged such that they are adequately secured against movement. To meet these requirements: The fixings must be reliable and must also require the use of a tool to undo them. Mount the safety switch positively For safety-related applications (fixed positioning), mount switch with M5x30 screws. To ensure correct operation: Axially align safety switch hollow shaft and hinged actuator on the safety guard. Positively connect hollow shaft to the moving part of the safety guard (e.g. door). Fig. 3: Opening the safety switch Break out the required entry opening. Fit cable gland M16 x 1.5, or NPT Adapter with appropriate degree of protection. Conductor cross-section 0.34 mm2 ... 1.5 mm². For pin assignment see Figure 2. Tighten the screws with a torque of 0.5 Nm. Check that the cable entry is sealed. Close the cover and screw in position. Setup Mechanical function test Actuate hinged actuator and check the switching function. The switch does not perform guard locking! Mounting Torque=0,6Nm HP2011-030 Fig. 2: Switching elements and switching functions Electrical connection Electrical connection must be performed only by authorized personnel. When choosing the insulation material and wire for the connections, pay attention to the overtemperature in the housing (depending on the operating conditions)! For use and applications as per the requirements of , a class 2 power supply or a class 2 transformer according to UL1310 or UL1585 must be used. As an alternative, a low voltage power supply according to UL508 table 32.1 can be used. Electrical function test Close the safety guard. Start the machine. Check whether the machine stops when the safety guard is opened. Switch off the machine. Open the safety guard. The machine must not start when the safety guard is open (hinge switch actuated)! HP2008-HM & HP2011-HM Operating Instructions for HP2008-HM and HP2011-HM Series Safety Switches Service and inspection *fixed positioning for safety-related applications (M5) (57) 32 25 No servicing is required, but regular inspection of the following is necessary to ensure trouble-free long-term operation: correct switching function secure mounting of components dirt and wear sealing of cable entry loose cable connections. 12,5 22 13 8 115,5 3,2 17 * 25,5 5 1,5 ∅ 10,2 40 ∅ 14 M3 If damage or wear is found, the complete switch must be replaced. 3,2 ∅5 16,5 ∅ 4,2 Replacement of individual parts or assemblies is not permitted! 18 Torque=0,6Nm M16x1,5 M16x1,5 16 Safety switches must be completely replaced after 4 million operating cycles. 12,5 Exclusion of liability under the following conditions: 25 D 32 A if the unit is not used for its intended purpose non-compliance with safety regulations installation and electrical connection not performed by authorized personnel. failure to perform functional checks. Torque=0,6Nm Torque=0,6Nm C B Technical data Parameters Housing material Fig. 6: Dimension drawing for HP2011-HM Degree of protection according to IEC 60529 Mech. operating cycles Ambient temperature Degree of contamination (external, according to EN 60947-1) Installation position Actuating force at 20 °C Actuation frequency, max. Switching principle Contact material (57) 32 22 13 8 M3 25 3,2 17 * 25,5 40 5 1,5 ∅ 10,2 85,5 ∅ 14 12,5 ∅5 16,5 M16x1,5 32 Torque=0,6Nm 18 25 D A Torque=0,6Nm *fixed positioning for safety-related applications (M5) Torque=0,6Nm C IP67 > 4x10 6 -20...+80 °C 3 (industrial) Any 0,1 Nm 5000 / h Slow-action contact element Silver alloy gold flashed Screw terminals 0.34 mm2 ... 1.5 mm2 Connection type Conductor cross-section Rated impulse Uimp = 2.5 kV withstand voltage Rated Ui = 250 V insulation voltage Switching voltage min. 12 V at 10 mA Utilization category to EN 60947-5-1 AC-15 4 A 230 V DC-13 4 A 24 V Switching current, min., 1 mA at 24 V Short circuit protection (control circuit fuse) 4 A gG according to IEC 60269-1 Conventional thermal current I th 4 A 3,2 ∅ 4,2 Value Reinforced thermoplastic B Fig. 7: Dimension drawing for HP2008-HM Safety, Technology & Innovation 13-14 21-22 4° 0° 4°10° 0° 25° HP2008-11 25° 21-22 31-32 HP2008-02 13-14 21-22 31-32 4°10° 0° 25° HP2011-021 Fig. 8: Travel diagrams HP2008 and HP2011 Series Switches 11-12 21-22 4° 0° 25° 31-32 HP2011-030 OMRON SCIENTIFIC TECHNOLOGIES, INC. 6550 Dumbarton Circle, Fremont CA 94555-3605 USA Tel: 1/510/608-3400 Fax: 1/510/744-1442 E-mail: sales@sti.com www.sti.com European Tech Support Tel: +49 (0) 52 58 93 87 76 Fax: +49 (0) 52 58 93 56 90 UK Sales Office Tel: +44 (0) 1395-273-209 Fax: +44 (0) 1395-276-183 ©2007 Omron Scientific Technologies, Inc. All rights reserved. Subject to technical modifications. Drawing number 097122-02-09/07 OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Authorized Distributor: Automation Control Systems • Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders Temperature & Process Controllers • Single and Multi-loop Controllers Sensors & Vision • Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors • Amplified Photomicrosensors • Measurement Sensors • Ultrasonic Sensors • Vision Sensors Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators • Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches C369I-E-01 07/15 Note: Specifications are subject to change. Printed on recycled paper. © 2015 Omron Electronics LLC Printed in U.S.A.
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.6 Linearized : No Author : Omron Create Date : 2007:11:19 10:15:02-08:00 Keywords : HP2011- HM Hinge-Operated Safety Interlock Switch, sti, door switches Modify Date : 2015:07:09 15:24:59-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Title : HP2011- HM Hinge-Operated Safety Interlock Switch Instruction Sheet Manual Creator : Omron Description : HP2011- HM Hinge-Operated Safety Interlock Switch Subject : HP2011- HM Hinge-Operated Safety Interlock Switch, sti, door switches Creator Tool : Adobe Illustrator CS2 Metadata Date : 2015:07:09 15:24:59-05:00 Thumbnail Width : 180 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22801 bytes, use -b option to extract) Document ID : uuid:204DF93D50C611DCACC58981987975C4 Instance ID : uuid:210e3464-84fa-4a6d-9b42-abab04ffebb0 Derived From Instance ID : uuid:cf269b3a-4298-4d1d-b2d2-6d316ba7b22b Derived From Document ID : uuid:8360D22A4D0E11DA9F8EC4EB3DD74A2B Producer : Adobe PDF library 7.77 Page Count : 3 For : Chris Webster, Urban Pirates Bounding Box : 41 58 567 805 Container Version : 9 Creator Version : 12 Warning : [Minor] Ignored duplicate Info dictionary Image Height : 747 Image Width : 526 Image Size : 526x747 Megapixels : 0.393EXIF Metadata provided by EXIF.tools