HY40008

Hy40006 HY40006 HY40006 pdf hbfile

Hy40009 HY40009 HY40009 pdf hbfile

: Pdf Hy40008 HY40008 pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Straight female connector. push-fit x BSP parallel female thread.
TX2/TX270G

TX2/TX270G

Size

Pattern No.

Pack 1 Qty

Pack 2 Qty

Code

Barcode

Price (£) ex VAT

15mm x 1/2"

TX2/TX270G

10

200

65206

5022050652065

£7.21

22mm x 3/4"

TX2/TX270G

5

100

65222

5022050652225

£8.37

22mm x 1"

TX2/TX270G

5

80

65223

5022050652256

£10.97

28mm x 1"

TX2/TX270G

2

50

65225

5022050652287

£19.60

Code

Description

a

Za

s

65206

15mm x 1/2" TX2/TX270G

40

3

25

65222

22mm x 3/4" TX2/TX270G

47

3

32

65223

22mm x 1" TX2/TX270G

49

2

38

65225

28mm x 1" TX2/TX270G

53

1

37

Pegler Yorkshire reserve the right to change specifications

Pegler Yorkshire Tectite Sprint, Classic, Pro and 316 Guarantee - Terms and Conditions
Products are subject to a guarantee that is between Pegler Yorkshire and the final purchaser of the
product. When correctly assembled with the stated tubes and pipe the length of guarantee is as follows:
25 Years Where Tectite Sprint, Tectite Classic, Tectite Pro and Tectite 316 fittings, Tectite-PEX barrier
pipe and 316 System tube are installed in pipelines with products from other manufacturers, they are
guaranteed for 25 years.
30 Years Where pipelines are constructed exclusively using Tectite fittings and recommended tubes,
the resulting installations will be deemed Tectite Systems and qualify for a 30 year guarantee.
Qualifying systems are:

Tectite Sprint fittings with Yorkex copper tube and/or Tectite-PEX pipe
Tectite Classic fittings with Yorkex copper tube and/or Tectite-PEX pipe
Tectite Pro fittings with Yorkex copper tube and/or Tectite-PEX pipe
Tectite 316 fittings and stainless steel 316 System tube.
The guarantee is subject to proof of purchase being supplied.
This guarantee does not affect any statutory rights the consumer may have in law.
The guarantee covers manufacturing or material defects when installed in accordance with our
instructions on specified tube materials and applications, and does not cover parts subject to normal
wear and tear.
This product range has been designed for the use of homeowners, domestic and commercial
applications and therefore the Guarantee is subject to the product being properly selected for their
intended service conditions.
The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting
instructions.
This is reinforced where valves are covered by the European Pressure Equipment Directive
(PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each
product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of
trouble–free service.
Abusive behaviour and accidental damage to the product are not covered by this guarantee.
The extent of this liability is limited to the cost of the replacement of the defective item and not to
installation or consequential damages.

CSN

DVGW

[460.7k]

KIWA Tectite

[132.8k]

TRL

OVGW

[3.6mb]

[354.9k]

WRAS

[41.0k]

[87.4k]

Tectite Fitting

Tube/pipe used with

Min temperature

Pro up to 28mm

Copper

­24˚C* at 20bar

30˚C at 20bar

65˚C at 16bar

Max temperature
114˚C at 10bar

Pro over 35mm

Copper

­24˚C* at 16bar

30˚C at 16bar

65˚C at 10bar

90˚C at 6 bar

Care
No regular aesthetic care is required for this product
Maintenance
No regular maintenance is required for this product.
For any further help please contact the Service Support Team on: 0800 1560050.

Component

Material

Body

DZR Brass

O ring

EPDM

Pipe guide

Glass filled nylon 6

Demount collar

Brass

Grab ring

Stainless steel

Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF
Telephone: Phone +44 (0) 844 243 4400 Fax: +44 (0) 844 243 9870 Website: www.pegleryorkshire.co.uk
Registered office : Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Installation instructions
For joints 10 to 54mm
Always cut the tube square, using a rotary tube
cutter whenever possible. Ensure the cutter wheel
appropriate for the material been cut (Carbon steel
requires a higher grade of cutter wheel, Pegler
Yorkshire recommend using the TC155 with a REMS
Cento)
If you are using PEX or PB pipe cut the pipe using
pipe shears. When using plastic coated carbon
steel tube remove the coating using the S115
stripping tool.
Deburr the tube end, both internally and externally
to create a 1mm chamfer on the outside of the
tube.

Check the tube ends are free from damage and
clean, wiping away any swarf to avoid damaging
the ‘O’ ring on tube insertion. Tube end must also
be free from stickers, tape and adhesive residues.
Where using PEX or PB you must use always insert
a support liner ensuring it is the correct liner as
specified by the pipe manufacturer. If the pipe
has been used on previous installations you will
need to cut it back to behind the teeth or score
marks.
Mark the socket depth with a marker.
Fitting socket depths for Tectite:

For chrome plated copper tube you must scribe the
tube using the correct Tectite Scribing tool.

Check the fitting and tube/pipe for damage before
remaking the joint.

Select the correct type and size of fitting for
pipework.

The plastic disconnecting clip may be used where
only an occasional disconnecting facility is
needed.

The fitting should be kept in its bag until point of
use to protect the ‘O’ ring.

For sizes 35mm to 54mm
Have replacement parts for the discarded items
ready for insertion. Using a spanner on the fitting
flats to prevent the fitting from rotating, insert
the Tectite DTX end cap tool into the slots in the
end cap. Turn the tool anti-clockwise to unscrew
the end cap and slide it along the tube away from
the fitting body.

Check the fitting ensuring the grab rings/’O’rings
have not been contaminated with grit or debris.
Insert the tube/pipe firmly with a slight twisting
action until it reaches the tube stop with a
positive “click”.
Ensure the depth insertion mark corresponds with
the mouth of the fitting, then pull firmly on the
tube/pipe to ensure the fitting is secure.

Pull the tube out of the fitting body.
Remove and discard the ‘O’ ring.

Note: Tectite Sprint and Tectite Carbon
fittings must not be used with male ended
fittings from other Tectite ranges (except
T526S). Other third party male ended
products should not be used with any
Tectite fittings.

Remove and retain the alignment ring.

Do not use Tectite fittings on gas services.

The components must be clean and the ‘O’ ring
lubricated using S130 Silicone lubricant. Replace
the components in the correct order, as shown,
and check they are fully seated in the fitting body.

Snip off the grab ring with side cutters and
discard. Before re-assembly replace the
discarded parts, Tectite Pro grab rings (TX105)
and Tectite 316 grab rings (TS106) these are not
interchangeable.

Tectite Classic fittings do not provide
electrical continuity, other Tectite fittings
only provide electrical continuity when
installed with metal tube.

De-mounting Tectite fittings
Range

De-mountability

Sprint
Classic
PRO
316
Carbon

No
Yes
Yes
Yes
No

For sizes 10mm to 28mm

Size

Sprint

Classic, PRO
& 316

Carbon

10mm
12mm
15mm
18mm
22mm
28mm
35mm
42mm
54mm

15mm
17mm
16mm
19mm
20mm
-

23mm
23mm
23mm
23mm
27mm
31mm
57mm
62mm
68mm

28mm
28mm
30mm
32mm
40mm
42mm
45mm

Place the forks of the disconnecting tool around
the fitting assembly. The fork side carrying the
Tectite brand logo should be positioned around the
tube/pipe with the opposite side around the neck
of the fitting.
Squeeze the disconnecting tool with one hand
until the release collar in the fitting is compressed.
With the other hand, twist out the tube/pipe using
the thumb as a lever against the tool to assist
disconnection.

The advantages of Tectite
n	 A totally heat-free jointing solution
n	Major reductions in installation times provides major installed
cost savings
n	No need for hot works permits or additional costly insurance
n	 Sizes from 10mm up to 54mm
n	Systems have an exceptionally clean bore with no flux residues
n	System guarantees* of up to 30 Years for Tectite Sprint, Tectite
Classic, Tectite Pro Tectite 316 and 20 Years for Tectite Carbon
and Tectite Flexifit connectors
Last revised 01 August 2012
*The definition of what constitutes a Tectite System can be found in the Guarantee section of the Tectite databook

Screw the end cap back into the fitting until hand
tight. If resistance is felt and the end cap is not
flush with the fitting body, remove the end cap
and ensure the grab ring is fully located i.e. fully
in contact with the alignment ring. Again screw
the end cap into the fitting until hand tight.
Temporarily insert a 300mm length of deburred
tube into the fitting BUT NOT THROUGH the grab
ring to help locate the demount tool. Tighten
the end cap a further 8mm to 10mm (radically).
Remove the tube.
Before reinstalling the fitting back into the
system, check the end of the tube for damage.
If the tube is scored or damaged, remove the
affected section with a tube cutter and prepare
the tube end as described in preliminaries and
tube preparation.

Tectite Fitting

Tube/Pipe used with

Classic

Copper

Sprint & Classic
Sprint & PRO
upto 28mm
PRO over 35mm
316 upto 28mm
316 over 35mm
Carbon

PEX & PB
Copper
Copper
Stainless steel
Stainless steel
Carbon Steel

Min Performance

Max Performance

30°C

-24°C

-20°C

65°C
16 bar

16 bar
20°C
12 bar
-24°C

65°C
12 bar

30°C
20 bar

-24°C

16 bar

16 bar

10 bar
90°C

10 bar
65°C

20 bar

6 bar
114°C

65°C

30°C
20 bar

10 bar

20 bar

16 bar

10 bar
90°C

65°C

30°C

-24°C

16 bar

16 bar

20 bar

3 bar
114°C

65°C

30°C

-24°C

6 bar

20 bar

16 bar

6 bar
92°C

65°C

30°C

-24°C

95°C
10 bar

6 bar
114°C

16 bar

10 bar



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Page Layout                     : OneColumn
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools