JR Clancy Titan Hoist Data Sheet

User Manual: Pdf JR Clancy Titan Hoist-DataSheet

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

DATA SHEET

Titan ®

High-Performance Hoist

T

itan is a high-performance hoist for applications requiring large capacity, speed and/or long
travel. Titan is a customizable pre-engineered hoist – it is engineered and manufactured to
your requirements yet provides the economic benefits of an “off-the-shelf” system.

Capability
• Speed: Up to 650 fpm (3.3 m/s)
• Travel: Up to 8 lines @ 90 ft. (27.4 m)
Up to 10 lines @ 67 ft. (20.4 m)
• Gross Capacity: Up to 3,300 lbs. (1,496 kg)
• Max batten length: 96 ft. (29.3 m)

Features
• Integrated gearmotor and brake provide proven
reliability and feature an iron case for
vibration and noise control.
• Reliable head block with nylon sheaves provide long,
trouble-free life and meet or exceed wire rope manufacturer recommendations.
• Zero-fleet design allows for a compact, efficient
hoist. Pre-loaded chase rollers ensure cables stay in
grooves.

• Quick-connect clamps – upright, underhung, vertical
• Encoder for precise target
• Quiet operation

• Closed loop vector drives provide pinpoint accuracy.
• A complete suite of load and safety features is
available including slack line, over/under load, and
cross-groove detection. Load monitoring, acoustic
dampening, and safety covers can also be added.

• Steel backbone adapts to your mounting and load
requirements.
• Center-to-center spacing
• ANSI E1.6.1 Compliant

page 1 of 5

• Hoists can be mounted vertically or horizontally. For
theatres without grids, vertical mounting can save space
and offers easier access for maintenance.

Titan ® High-Performance Hoist

Safety
	• Dual braking system with a primary brake on the motor and
an independent SureBrake® II operating directly on the drum
shaft. SureBrake II is spring applied and electrically released
for maximum safety.
	• Emergency-stop system meets NFPA 79 (Electrical Standard
for Industrial Machinery) with ramped stops for high speed
equipment to reduce mechanical shock loads.
	• Two levels of limit switches with normal travel and over
travel switches using separate, redundant circuits for added
safety.
	• Loft block idlers contain individual grooves to keep lines
contained, prevent binding, friction, and eliminate rubbing of
adjacent lines.
	• Touch safe interior of all electrical enclosures guards to
prevent contact with live components, per IEC 204-1
Protection.

Control Options
	• Titan works with the entire range of J.R. Clancy
motion control systems.

Loft Block Options
	• 1/4" Universal Series upright or underhung
	• 1/4" 19 Series underhung

Batten Termination Options
	• Trim Chain
	• Pipe Clamp and Turnbuckle
	• Batten Trim Plate
	• Batten Trim Clamp

	• 1.5” (48 mm) Schedule 40 batten
	• 1.5” (48 mm) Schedule 80 batten
	• 1.5” (48 mm) Schedule 40 truss batten

page 2 of 5

Batten Options

Titan ® High-Performance Hoist

6'-0" (1.83 m) MIN C/C
12'-0" (3.7 m) MAX C/C

VERTICAL AND HORIZONTAL
INSTALLATIONS SHOWN

1'-6" MIN
(457 mm)

1'-0" (305 mm) MIN BETWEEN
TITAN BACKBONE AND
BOTTOM OF HEADBLOCK

8 LINE: 90'-0" (27.4 m)MAX BATTEN TRAVEL
10 LINE: 67'-0" (20.4 m) MAX BATTEN TRAVEL

8 LINE: 76'-0" (23.2 m) MAX BATTEN LENGTH
10 LINE: 96'-0" (29.3 m) MAX BATTEN LENGTH

Product CAD files and other
documents available for
download on our website.
www.jrclancy.com/
titan-high-performancehoist.php

Hoist
Capacity
Hoist
Capacity

Loading
Information

Hoist Capacity

Hoist
self
weight

750 lb
(340 kg)
max
750 lb
(340 kg)
max

page 3 of 5

Loft Block: (Typical of 7) The
combined load on the loft blocks
associated with a single Titan hoist
will not exceed the hoist capacity.
Loads may be unevenly distributed
on the batten with a maximum
load of 750 lb (340 kg) on any
individual loft block. Hoists are not
recommended to be used for lifting
people.

Titan ® High-Performance Hoist
Titan Riser — Typical
CONTROL CONSOLE OPTIONS

Power and Wiring Information: Titan is available for
virtually any 3-phase voltage world­wide. Control wiring is
dependent on your control system.

E-STOP STATIONS

TO CENTRAL CABINET
OR E-STOP SLAVE

1- BELDEN 8469
BY OTHERS

EMERGENCY STOP
AUTOMATED RIGGING SYSTEM

GEN
CY

EM

ACTIVATION WILL STOP AND INHIBIT ALL MOTION

ER

S T
O P

CONSOLE OPTIONS:
SCENECONTROL 24+ (DESK OR CART-MOUNT) 30' CABLE
SCENECONTROL 24 (DESK, PEDESTAL OR CART-MOUNT) 30' CABLE
SCENECONTROL 15 (DESK OR PEDESTAL-MOUNT), 30' CABLE
ABOVE CONNECTS TO ANY CONTROL POINT AND POWER OUTLET

REMOTE E-STOP STATION
- COMPACT
SIZE: 3.7"Hx3.7"Wx3.2"D
LOCATION: 44"AFF, TBD

SCENECONTROL 10 (WALL-MOUNT, 19" RACK-MOUNT OR PENDANT
WITH 30' CABLE - PENDANT CONNECTS TO ANY CONTROL POINT)

REMOTE E-STOP STATION
WITH GUARD
SIZE: 8.5"Hx6"Wx5.7"D
LOCATION: 44"AFF, TBD

NOTE:
BASE SYSTEM SUPPORTS UP TO FOUR (4) REMOTE E-STOP STATIONS
(WITHOUT ANNUNCIATION OR ILLUMINATION) WITHOUT AN
E-STOP MASTER.

AT LEAST ONE CONSOLE REQUIRED PER SYSTEM.
OTHER OPTIONS:
CONSOLE PEDESTAL
CONSOLE CART
25' CONTROL EXTENSION CABLE

CENTRAL CABINET OPTIONS: ONE (1) REQUIRED

CONTROL POINT(S)

SERVICE:
110-240VAC,
50-60Hz, 1Ă
20A, 2W+GND
BY OTHERS

SERVICE:
110-240VAC,
50-60Hz, 1Ă
20A, 2W+GND
BY OTHERS

TO CENTRAL CABINET

1- BELDEN 8468
2- BELDEN 1583A
BY OTHERS

1- BELDEN 8468
2- BELDEN 1583A
BY OTHERS

EMERGENCY STOP
AUTOMATED RIGGING SYSTEM
ACTIVATION WILL STOP AND INHIBIT ALL MOTION

NETWORK 1

E-STOP PORT
NETWORK 2

SERVICE:
110-240VAC,
50-60Hz, 1Ă,
20A, 2W+GND
BY OTHERS

CONTROL POINT
SIZE: 6.3"Hx6.3"Wx4.2"D
LOCATION: 18" AFF,
TBD

TO CENTRAL CABINET
NETWORK 1

NETWORK 2

E-STOP I/O PORT

CONTROL POINT W/ E-STOP
SIZE: 8.5"Hx6"Wx5.7"D
LOCATION: 44"AFF, TBD

CONSOLE POWER OUTLET
ON 4" SQUARE COVER ENCLOSURE BY OTHERS
LOCATION: 18" AFF, NEAR
EACH CONTROL POINT

E-STOP MASTER WITH NETWORK SWITCH REQUIRED IF REMOTE E-STOP STATIONS REQUIRE ANNUNCIATION
OR ILLUMINATION, OR IF MORE THAN FOUR (4) REMOTE
E-STOPS. ONE E-STOP MASTER SUPPORTS UP TO SIXTEEN (16)
CONSOLE PORTS AND REMOTE E-STOP STATIONS.
SIZE: AS REQUIRED FOR QUANTITY OF AXES AND E-STOPS
UNDER CONTROL
LOCATION: AS REQUIRED FOR VENUE LAYOUT.

NOTE:
MINIMUM OF ONE (1) CONTROL POINT (WITH OR WITHOUT REMOTE
E-STOP) REQUIRED PER SYSTEM

E-STOP RELAY CABINET WITH NETWORK SWITCH: AVAILABLE IF
FEWER THAN FOUR E-STOPS WITH NO ANNUNCIATION OR
ILLUMINATION
SIZE: AS REQUIRED FOR QUANTITY OF AXES UNDER CONTROL
LOCATION: AS REQUIRED FOR VENUE LAYOUT

TITAN HOIST SYSTEM

TITAN HOIST W/ 8' CONTROL AND POWER TAILS
208/380/480VAC 3Ă 50/60Hz
HP PER CHART
TYPICAL OF NUM (#) PROVIDED
FACTORY-WIRED

Current Draw

Model

HP

208 V

380 V

480 V

018-P0220G

1.5 (1.12 kW)

5A

2.8 A

2.2 A

018-P0220R

1.5 (1.12 kW)

5A

2.8 A

2.2 A

018-P1212R

5 (3.73 kW)

14.5 A

5.5 A

6.3 A

018-P1220R

7.5 (5.6 kW)

20 A

11 A

8.7 A

018-P1812R

7.5 (5.6 kW)

20 A

11 A

8.7 A

010-P1817R

10 (7.5 kW)

-

28 A

23 A

TO CENTRAL CABINET
OR E-STOP
EXPANSION

1 - BELDEN 8469 PER WIREWAY SECTION
1 - BELDEN 1583A PER HOIST RECEPTACLE
(UP TO EIGHT (8) PER WIREWAY SECTION)
BY OTHERS

HOIST POWER AND CONTROL WIREWAY - EACH SECTION
8.5"H x 5"D x 96"L (MAXIMUM SECTION LENGTH)
ADDITIONAL WIREWAY SECTIONS AS REQUIRED

CONTROL
DN

BYPASS

FAULT

UP
UP

DOWN

OFF

ON

HC - 100

SC5000 HC-1O0B
LOCAL CONTROL PENDANT
TYPICAL OF ONE (1) PER
CONTROL SYSTEM
(TYPICAL)

SERVICE:
208-480VAC, 50-60Hz, 3Ă,
SINGLE FEED AT 100A MAX.
PER WIREWAY SECTION
BY OTHERS

page 4 of 5

Titan Electrical Requirements

E-STOP

OVER TRAVEL

Titan ® High-Performance Hoist

Warranty and Support
Three-Year Warranty against defects in materials or workmanship
is provided on all J.R. Clancy equipment. Our warranty is contingent
on operation by trained per­sonnel and an annual equipment
inspection of a J.R. Clancy authorized technician.
24/7 factory technical support with additional service and
assistance provided by a worldwide network of J.R. Clancy
authorized dealers.
Inspection and maintenance are available through J.R. Clancy’s
T.I.M.® (Training, Inspection, Maintenance) Program.

Ordering Information
Model Number

Hoist Speed

Hoist Capacity

018-T0224

20 fpm (0.1 m/s)

2,400 lb (1,089 kg)

018-T0233

20 fpm (0.1 m/s)

3,300 lb (1,497 kg)

018-T2022

200 fpm (1.0 m/s)

2,200 lb (998 kg)

018-T2030

200 fpm (1.0 m/s)

3,000 lb (1,361 kg)

018-T2633

260 fpm (1.3 m/s)

3,300 lb (1,497 kg)

018-T3413

340 fpm (1.7 m/s)

1,300 lb (590 kg)

018-T3417

340 fpm (1.7 m/s)

1,750 lb (794 kg)

018-T4022

400 fpm (2.0 m/s)

2,200 lb (998 kg)

018-T6514

650 fpm (3.3 m/s)

1,400 lb (635 kg)

Additional Information
For more information on Titan, visit www.jrclancy.com to access:
• Detailed structural loading
• Specifications
• Electrical risers diagrams

WENGER CORPORATION

Phone 800.4WENGER (493-6437) Worldwide +1.507.455.4100 | Parts & Service 800.887.7145 | Canada Office 800.268.0148 | wengercorp.com
555 Park Drive, PO Box 448 | Owatonna MN 55060-0448

J.R. CLANCY

Phone 800.836.1885 Worldwide +1.315.451.3440 | jrclancy.com | 7041 Interstate Island Road | Syracuse NY 13209-9713

GEARBOSS

Phone 800.493.6437 | email gearboss@wengercorp.com | gearboss.com | 555 Park Drive, PO Box 448 | Owatonna MN 55060-0448

page 5 of 5

© 2018 Wenger Corporation
USA/2018-02/W



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:03:14 17:20:43-05:00
Creator                         : Adobe InDesign CC 13.0 (Macintosh)
Modify Date                     : 2018:03:19 14:50:16-05:00
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2018:03:19 14:50:16-05:00
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:6c5603d3-e6f2-4e25-9e33-03714ae5dea5
Original Document ID            : xmp.did:41b729a9-de69-447a-af27-5732bc2f5ecd
Document ID                     : xmp.id:5a97fbf1-8519-4e5b-bea0-c5505cfa67d6
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:a1eab837-0cff-47f7-a38b-6ac182b2299d
Derived From Document ID        : xmp.did:4beb6a16-c831-4a12-92e6-4afa01c66e50
Derived From Original Document ID: xmp.did:41b729a9-de69-447a-af27-5732bc2f5ecd
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:03:14 17:20:43-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Mode                       : UseThumbs
Page Count                      : 5

EXIF Metadata provided by EXIF.tools