Jblprx710 User Manual
JBL_PRX710.v1 JBL - Manuals+
2017-03-29
User Manual: Pdf Jblprx710 JBLPRX710 pdf kavson.co.uk
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System Features: 䉴 Maximum SPL Output 133 dB Peak 䉴 10" low-frequency driver for low-distortion and higher SPL 䉴 1.5" diameter next generation JBL neodymium compression driver 䉴 1500W (dual 750 watt) highly efficient Class-D amplifier 䉴 Normal and Boost user selectable EQ presets 䉴 DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ 䉴 Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through 䉴 Integrated 36 mm pole mount socket with angle down tilt 䉴 Integrated 9 x M10 suspension points 䉴 Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™ finish Application: 䉴 The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a single socket pole mount the PRX710 is a perfect match with a PRX715XLF subwoofer offering a high performance self-powered sub/sat system. 䉴 The PRX710 is comprised of a 10" woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100° by 60° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. 䉴 All PRX700 cabinets are built from a combination of 25 mm (on the top and bottom for added rigidity) and 18 mm, strong, lightweight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yieldstrength of 1000 lbs. each. 䉴 The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob. Specifications: System: System Type: Self Powered 10", two-way, bass-reflex Maximum SPL Output: 133 dB peak Frequency Range (-10 dB): Normal: 50 Hz – 19.6 kHz Boost: 42.9 Hz – 20 kHz Frequency Response (±3 dB): Normal: 63.5 Hz – 18.5 kHz Boost: 53 Hz – 18.6 kHz Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced) Signal Indicators: Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio. EQ: User selectable presets for Normal and Boost Dynamic Control (Input): dbx Type IV™ limiter circuit Crossover Frequency: 1.9 kHz Amplifier: Design: Highly efficient Class-D amplifier Power Rating: 1500W (750W x 2) AC Power Input: 100V - 240V ∼ 50/60 Hz Speaker: LF Driver: 1 x JBL M110-4 250 mm (10 in) woofer HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver Coverage Pattern: 100° x 60° nominal Directivity Index (DI): 9 dB Directivity Factor (Q): 8 Enclosure: Trapezoidal, 18 mm, plywood Suspension / Mounting: Single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point Transport: 1 x integrated handle with injection molded backing cup Finish: Obsidian DuraFlex™ finish Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. Dimensions (H x W x D): 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69 in) Net Weight: 13.6 kg (30.0 lb) Gross Weight: 16.4 kg (36.0 lb) JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated. 䉴 PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System Frequency Response (Normal) 110 110 100 100 SPL (dB) SPL (dB) Frequency Response (Boost) 90 80 80 70 20 90 100 1000 10000 20000 70 20 100 1000 10000 20000 Frequency (Hz) Frequency (Hz) Dimensions Dimensions in mm (in) JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A. © Copyright 2015 JBL Professional www.jblpro.com SS PRX710 CRP 03/15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:03:30 10:24:11-07:00 Modify Date : 2015:03:30 10:24:40-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:03:30 10:24:40-07:00 Format : application/pdf Document ID : uuid:5baac7ee-4c5e-fd4f-81b1-c6663f419e2f Instance ID : uuid:4807777f-2e10-a249-9672-d4c77349ba43 Producer : Creo Normalizer JTP Page Count : 2EXIF Metadata provided by EXIF.tools