SW1.spec Kl 6205 Spec

: Pdf Kl 6205 Spec kl_6205_spec spec products kim

Open the PDF directly: View PDF .
Page Count: 6

Specifications

Square Hood 6205

Die-Cast Aluminum, PAR20 Metal Halide

revision 8/15/11 • 6205.pdf

Housing and Shield: Die-cast, low copper (<0.6% Cu)

aluminum.

Swivel: Die-cast, low copper (<0.6% Cu) aluminum with

locking teeth and K" solid brass NPT mount. Provides

horizontal rotation independent of the threaded mount. Swivel

locked by J-20 stainless set screw. Clear anodized prior to

titanated zirconium conversion coating for added corrosion

resistance.

Lens: Convex clear tempered glass with silicone gasket.

Socket: Porcelain medium base.

Wiring: No. 18AWM rated 105°C.

Ballast: High power factor, long range ignitors, -20°F. starting,

mounted on tray, 120 volt standard.

Ballast Box: High temperature, compression molded

featuring long-fiber fiberglass impregnated heavy wall

construction. Wall separates ballast chamber from splice

compartments, splice area 32 cu in.; prewired, two anti-

siphon plugs to and from ballast chamber. Conduit entry; two

L" NPT for through wiring, one K" NPT for remote access.

Ballast Cover: Cast bronze, supplied with K" NPSM for

direct mount, with stainless steel set screw lock. Flat for

remote mount.

Finish: Super TGIC thermoset polyester powder coat paint,

2.5 mil nominal thickness, applied over a titanated zirconium

conversion coating; 2500 hour salt spray test endurance rating.

Standard colors are Black (BL), Dark Bronze (DB), and Verde

Green (GR).

Certification: UL Listed to U.S. and Canadian safety

standards for wet locations.

Approvals:Type:

Job:

Fixture Catalog number:

Date:

Page: 1 of 6

REMOTE MOUNT

6D"

(168.3 mm)

4"

(101.6 mm)

DIRECT MOUNT

2B"

(54.0 mm)

8"

(203.2 mm)

7C"

(187.3 mm)

(1) K" NPT

(2) L" NPT

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

//

Fixture Lamp Mode Finish

ORDERING INFORMATION

Fixture

 6205D Direct Mounting

 6205R Remote Mounting

Lamp Mode1

 35PMH120

 35PMH208

 35PMH240

 35PMH277

 35PMH347

Lamp PAR20

Socket Medium Base

ANSI Ballast M-130

Type

Finish

 BL Black

 DB Dark Bronze

 GR Verde Green

Remote Mounting Options:

Ordered Separately from Fixture

See pages 3-6

Fixture Options:

Ordered Separately from Fixture

See page 2

JBR mount shown, purchased separately.

135 PMH 120Line Volts

Lamp Type:

PMH = Pulse Start

Metal Halide

Lamp Watts

KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

DISCONTINUED

Reset Form

Square Hood 6205

Die-Cast Aluminum, PAR20 Metal Halide

revision 8/15/11 • 6205.pdf

Page: 2 of 6

Type:

Job:

Fixture Options

Ordered Separately from Fixture

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Internal Louver

Cat. No.

 L20

No Option

Provides additional brightness control. Constructed of hex cell

aluminum louvers providing 45° cutoff, mounted in a circular frame,

finished in baked high-heat flat black. Can be used in combination

with colored lenses. Clips onto rim of PAR20 lamp and provides

additional brightness control.

DISCONTINUED

Square Hood 6205

Die-Cast Aluminum, PAR20 Metal Halide

revision 8/15/11 • 6205.pdf

Page: 3 of 6

Type:

Job:

Remote Mounting Options

Ordered Separately from Fixture

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

PVC fixture molded in black with K" NPT mount is corrosion

free and UV resistant. Replaces EMT, conduit connectors and

weatherproof boxes. 100% shatter resistant against denting

and cracking. Angled bottom to eliminate cable congestion.

17K" post length.

CAUTION: EP17 should be used with a UL Listed fixture and

grounding means (i.e., third wire) suitable for use in wet

locations.

“x” = required depth of conduit per local code.

NOTE: Maximum remote mounting distance for 35PMH

fixture is 50'.

Landscape Light Post by

Engineered Products Co.

Cat. No.

EP17

No Option

Die-cast, low copper (<0.6% Cu) aluminum with K" NPSM

fixture mount. Internal set screw provided for locking

position. Two K" NPSM in bottom, 17 cu in. internal volume.

Super TGIC powder coat paint over clear anodizing and

titanated zirconium conversion.

Application Notes

• Elevates accent lights above ground cover to prevent

foliage from blocking the light.

• Elevates path lights above ground cover to achieve a

greater light throw.

CAUTION: Junction box must be installed high enough to

avoid contact with soil or standing water.

When installed on a single “feed” conduit, provide additional

24"long stablizer pipe with cap. Installation on single conduit

not recommended.

Architectural Junction Box

Cat. No. Finish

JB1/BL Black

JB1/DB Dark Bronze

JB1/GR Verde Green

No Option

17K"

(444.5 mm)

3K"

(88.9 mm)

1"

(25.4 mm)

5"

(127.0 mm)

3J" DIA.

(82.6 mm)

2J"

(57.2 mm)

K" NPT

Fixture

Mount

xx

RigidRigid

ConduitConduit

(by others)(by others)

Rigid

Conduit

(by others)

4L"

(120.7 mm)

3" DIA.

(76.2 mm)

K" NPSM

Fixture

Mount

DISCONTINUED

Square Hood 6205

Die-Cast Aluminum, PAR20 Metal Halide

revision 8/15/11 • 6205.pdf

Page: 4 of 6

Type:

Job:

Remote Mounting Options

Ordered Separately from Fixture

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Die-cast brass with K" NPSM fixture mount and

die-cast cover. Internal set screw provided for locking

position. 18 cu. in. internal volume.

JBR-2 (2) K" NPT in bottom

JBR-3 (2) L" NPT in bottom

JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom

JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom

All side taps provided with plugs.

25 Year Limited Warranty:

Solid brass junction boxes are warranted for 25 years, from

date of sale, against manufacturing defects and failure due to

corrosion.

Application Notes

• Utilizing conveniently located ballast box, fixtures can be

remote mounted.

• Cast brass slowly adopts environmental “patina” adapting

itself to the landscape.

• May be cast in concrete for increased stability.

CAUTION: Fixture stem and swivel must not contact soil or

standing water. Provide drainage away from junction box.

Lamp and ballast must be of equal wattage. Ballast box must

be installed high enough to encourage water drainage away

from the housing.

NOTE: Maximum remote mounting distance for 35PMH

fixture is 50'.

Brass In-grade

Architectural Junction Box

Cat. No.

JBR-2

JBR-3

JBR-21

JBR-24

No Option

3"

(76.2 mm)

K"

(12.7 mm)

K" NPSM

Fixture

Mount

3L" DIA.

(95.3 mm)

DISCONTINUED

Square Hood 6205

Die-Cast Aluminum, PAR20 Metal Halide

revision 8/15/11 • 6205.pdf

Page: 5 of 6

Type:

Job:

Remote Mounting Options

Ordered Separately from Fixture

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Die-cast brass with K" NPSM fixture mount and die-cast

cover. Internal set screw provided for locking position.

18 cu in. internal volume.

(2) K" NPT in bottom with (2) 19"long stakes.

25 Year Limited Warranty:

Solid brass junction boxes are warranted for 25 years, from

date of sale, against manufacturing defects and failure due

to corrosion.

Application Notes

•Utilizing conveniently located ballast box, fixtures can be

remote mounted.

•Cast brass slowly adopts environmental “patina” adapting

itself to the landscape.

•May be cast in concrete for increased stability.

CAUTION: Fixture stem and swivel must not contact soil or

standing water. Provide drainage away from junction box.

Lamp and ballast must be of equal wattage. Ballast box must

be installed high enough to encourage water drainage away

from the housing.

NOTE: Maximum remote mounting distance for 35PMH

fixture is 50'.

Brass In-grade Staked

Junction Box

Cat. No.

JBR30

No Option

3"O.D. by .188"wall cast, low copper (<0.6% Cu)

aluminum with K" NPSM fixture mount and hand hole with

flush cover. Internal set screw fixture lock accessible through

hand hole. Internal ground lug supplied with installed lead.

Super TGIC powder coat paint over clear anodizing and

titanated zirconium conversion.

Stanchion Mount

Cat. No. Finish

SM18/BL Black

SM18/DB Dark Bronze

SM18/GR Verde Green

No Option

OptionalOptional

ConcreteConcrete

(by others)(by others)

RigidRigid

ConduitConduit

(by others)(by others)

Rigid

Conduit

(by others)

6" Min. (152.4 mm)

12" Max. (304.8 mm) 18"

(457.2 mm)

K" NPSM

Fixture Mount

3" DIA.

(76.2 mm)

Optional

Concrete

(by others)

18D"

(473.1 mm)

19C"

(492.1 mm)

3K"

(88.9 mm)

3L" DIA.

(95.3 mm)

1"

(25.4 mm)

K" NPSM

Fixture Mount

DISCONTINUED

Square Hood 6205

Die-Cast Aluminum, PAR20 Metal Halide

revision 8/15/11 • 6205.pdf

Page: 6 of 6

Type:

Job:

Remote Mounting Options

Ordered Separately from Fixture

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Cast aluminum with K" NPSM fixture mount. Internal set

screw provided for locking position. 5 cu in. internal volume.

Super TGIC powder coat paint over clear anodizing and

titanated zirconium conversion.

Application Notes

•Utilizing conveniently located ballast box, fixtures can be

surface mounted.

CAUTION: Lamp and ballast must be of equal wattage.

Ballast box must be installed high enough to encourage water

drainage away from the housing.

NOTE: Maximum remote mounting distance for 35PMH

fixture is 50'.

Surface Mount

Cat. No. Finish

J-27N/BL Black

J-27N/DB Dark Bronze

J-27N/GR Verde Green

No Option

2F"

(55.6 mm)

K" NPSM

Fixture

Mount

4K"

(114.3 mm)

1L"

(44.5 mm)

DISCONTINUED