SW1.spec Kl 6205 Spec
2014-11-19
: Pdf Kl 6205 Spec kl_6205_spec spec products kim
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Reset Form Square Hood 6205 Die-Cast Aluminum, PAR20 Metal Halide revision 8/15/11 • 6205.pdf Type: Job: Fixture Catalog number: Approvals: Fixture Options: UE D Ordered Separately from Fixture See page 2 Remote Mounting Options: Fixture / / Lamp Mode Finish Date: Page: 1 of 6 Ordered Separately from Fixture See pages 3-6 Specifications Lamp Mode1 35PMH120 35PMH208 35PMH240 35PMH277 35PMH347 TIN Housing and Shield: Die-cast, low copper (<0.6% Cu) aluminum. Swivel: Die-cast, low copper (<0.6% Cu) aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to titanated zirconium conversion coating for added corrosion resistance. Lens: Convex clear tempered glass with silicone gasket. Socket: Porcelain medium base. Wiring: No. 18AWM rated 105°C. Ballast: High power factor, long range ignitors, -20°F. starting, mounted on tray, 120 volt standard. Ballast Box: High temperature, compression molded featuring long-fiber fiberglass impregnated heavy wall construction. Wall separates ballast chamber from splice compartments, splice area 32 cu in.; prewired, two antisiphon plugs to and from ballast chamber. Conduit entry; two L" NPT for through wiring, one K" NPT for remote access. Ballast Cover: Cast bronze, supplied with K" NPSM for direct mount, with stainless steel set screw lock. Flat for remote mount. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION Fixture 6205D Direct Mounting 6205R Remote Mounting Lamp PAR20 Socket Medium Base ANSI Ballast M-130 Type CO N Finish BL DB GR Black Dark Bronze Verde Green 1 35 PMH 120 DIS Line Volts Lamp Type: PMH = Pulse Start Metal Halide Lamp Watts 6D" (168.3 mm) 2B" 4" (54.0 mm) (101.6 mm) 8" (203.2 mm) 7C" (187.3 mm) (1) K" NPT (2) L" NPT DIRECT MOUNT JBR mount shown, purchased separately. REMOTE MOUNT KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. © 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 Square Hood 6205 Die-Cast Aluminum, PAR20 Metal Halide revision 8/15/11 • 6205.pdf Type: Job: UE D Page: 2 of 6 Fixture Options Ordered Separately from Fixture Provides additional brightness control. Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Clips onto rim of PAR20 lamp and provides additional brightness control. DIS CO N TIN Internal Louver Cat. No. L20 No Option © 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 Square Hood 6205 Die-Cast Aluminum, PAR20 Metal Halide revision 8/15/11 • 6205.pdf Type: Job: UE D Page: 3 of 6 Remote Mounting Options Ordered Separately from Fixture 3J" DIA. (82.6 mm) K" NPT Fixture Mount 2J" (57.2 mm) 1" (25.4 mm) 17K" (444.5 mm) 3K" (88.9 mm) Rigid Conduit (by others) Die-cast, low copper (<0.6% Cu) aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion. Application Notes • Elevates accent lights above ground cover to prevent foliage from blocking the light. • Elevates path lights above ground cover to achieve a greater light throw. CAUTION: Junction box must be installed high enough to avoid contact with soil or standing water. When installed on a single “feed” conduit, provide additional 24" long stablizer pipe with cap. Installation on single conduit not recommended. DIS CO N Architectural Junction Box Cat. No. Finish JB1/BL Black JB1/DB Dark Bronze JB1/GR Verde Green No Option PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length. CAUTION: EP17 should be used with a UL Listed fixture and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local code. NOTE: Maximum remote mounting distance for 35PMH fixture is 50'. TIN Landscape Light Post by Engineered Products Co. Cat. No. EP17 No Option © 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 3" x 5" (127.0 mm) DIA. (76.2 mm) K" NPSM Fixture Mount 4L" (120.7 mm) Square Hood 6205 Die-Cast Aluminum, PAR20 Metal Halide revision 8/15/11 • 6205.pdf Type: Job: UE D Page: 4 of 6 Remote Mounting Options Ordered Separately from Fixture TIN Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu. in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Utilizing conveniently located ballast box, fixtures can be remote mounted. • Cast brass slowly adopts environmental “patina” adapting itself to the landscape. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box. Lamp and ballast must be of equal wattage. Ballast box must be installed high enough to encourage water drainage away from the housing. NOTE: Maximum remote mounting distance for 35PMH fixture is 50'. 3L" DIA. (95.3 mm) K" NPSM Fixture Mount DIS CO N Brass In-grade Architectural Junction Box Cat. No. JBR-2 JBR-3 JBR-21 JBR-24 No Option © 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 K" (12.7 mm) 3" (76.2 mm) Square Hood 6205 Die-Cast Aluminum, PAR20 Metal Halide revision 8/15/11 • 6205.pdf Type: Job: UE D Page: 5 of 6 Remote Mounting Options Ordered Separately from Fixture Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long stakes. 3L" DIA. 25 Year Limited Warranty: (95.3 mm) Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Utilizing conveniently located ballast box, fixtures can be 19C" (492.1 mm) remote mounted. • Cast brass slowly adopts environmental “patina” adapting itself to the landscape. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box. Lamp and ballast must be of equal wattage. Ballast box must be installed high enough to encourage water drainage away from the housing. NOTE: Maximum remote mounting distance for 35PMH fixture is 50'. CO N TIN Brass In-grade Staked Junction Box Cat. No. JBR30 No Option Optional Concrete (by others) © 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 3K" (88.9 mm) 18D" (473.1 mm) 3" O.D. by .188" wall cast, low copper (<0.6% Cu) aluminum with K" NPSM fixture mount and hand hole with K" NPSM flush cover. Internal set screw fixture lock accessible through Fixture Mount hand hole. Internal ground lug supplied with installed lead. 6" Min. (152.4 mm) Super TGIC powder coat paint over clear anodizing and 12" Max. (304.8 mm) titanated zirconium conversion. DIS Stanchion Mount Cat. No. Finish SM18/BL Black SM18/DB Dark Bronze SM18/GR Verde Green No Option K" NPSM Fixture Mount 1" (25.4 mm) 3" DIA. (76.2 mm) 18" (457.2 mm) Rigid Conduit (by others) Square Hood 6205 Die-Cast Aluminum, PAR20 Metal Halide revision 8/15/11 • 6205.pdf Type: Job: UE D Page: 6 of 6 Remote Mounting Options Ordered Separately from Fixture TIN Cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion. Application Notes • Utilizing conveniently located ballast box, fixtures can be surface mounted. CAUTION: Lamp and ballast must be of equal wattage. Ballast box must be installed high enough to encourage water drainage away from the housing. NOTE: Maximum remote mounting distance for 35PMH fixture is 50'. DIS CO N Surface Mount Cat. No. Finish J-27N/BL Black J-27N/DB Dark Bronze J-27N/GR Verde Green No Option © 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 2F" (55.6 mm) 4K" (114.3 mm) 1L" (44.5 mm) K" NPSM Fixture Mount
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 4.0 for Macintosh Create Date : 1999:09:09 11:21:15Z Modify Date : 2014:11:14 15:32:07-08:00 Metadata Date : 2014:11:14 15:32:07-08:00 Creator Tool : QuarkXPress(tm) 4.04 Document ID : uuid:676a6d1f-5934-4c52-be6e-4c630a8ffb74 Instance ID : uuid:6ccd1b27-98bd-cb40-90a1-18f9ea48c845 Format : application/pdf Creator : Adam Bosler Title : SW1.spec Page Layout : SinglePage Page Mode : UseThumbs Page Count : 6 Author : Adam BoslerEXIF Metadata provided by EXIF.tools