Kl Arfx16 Spec
2017-08-03
: Pdf Kl Arfx16 Spec kl_arfx16_spec spec products kim
Open the PDF directly: View PDF .
Page Count: 5
Download | |
Open PDF In Browser | View PDF |
16.37” (415.8 mm) ARFX16 ArcheType® X Flood Luminaire kl_arfx16_spec.pdf 16.37” (415.8 mm) JOB TYPE NOTES APPROVALS 16.37” (415.8 mm) 9” (228.6 mm) FEATURES ■■ Independently aimed LEAR™ modules ■■ ■■ 55° rotation and 70° tilt module 3 adjustment and -5° to +30° housing adjustment esign software interface for user-defined D Type X distribution creation ■■ Traditional NEMA distributions available Wide range of drive currents available ■■ IP66 sealed optical chamber ■■ SPECIFICATIONS Front Certifications IK09 24.75” (628.6 mm) Side 9” 16.37” (228.6 mm) (415.8 mm) 7.535” (191.3 mm) Bottom 16.37” (415.8 mm) 24.75” (628.6 mm) 6.5” 7.535” (165.1 mm) (191.3 mm) Max Weight = 51 lbs. EPA 2.63 ORDERING CODE EPA 1.35 EPA 0.87 9” (228.6 mm) ARFX16 Fixture Distribution Electrical Module Color Temperature WF Wide Flood VF Vertical Flood MF Medium Flood NF Narrow Flood X Type X1 3K 3000K 4K 4000K 5K 5000K Type X IES File Name Fixture Finish Voltages Drive Current 35 40 45 50 55 60 65 70 (628.6 mm) UV 120-277V 347 347V 480 480V 350mA 400mA 450mA 500mA 550mA 600mA WIR-RMI-IO 120 - 347V 1000 Foot Range WiScape RF mesh control system with off/on/dim, motion, photo, GPS location, alert, monitoring and metering capabilities. SiteSync Lighting Control SWP4,5 SiteSync Wireless Pre-Commission SWPM4,5,6 SiteSync Wireless Pre-Commission w/ Occupancy Sensor 7.535” (191.3 mm) 650mA Catalog Number SWUSB† SiteSync loaded on USB flash drive (Windows® operating system only) SWTAB† SiteSync Windows® based Tablet SWBRG† SiteSync Wireless Bridge Node BL Black DB GT PS TT WH Dark Bronze Graphite Photocell Options Fuse Options 7-pin Photocell A25-7H 6.5” (165.1 mm) Receptacle Horizontal3 A25-7V 7-pin Photocell Receptacle Vertical3 A30 120V Button Photocell SF 120, 277, 347 Line Volts Platinum Silver A31 208V Button Photocell Titanium A32 240V Button Photocell White A33 277V Button Photocell CC Custom Color2 700mA Control Options Wireless 24.75”LG Light Gray DF 208, 240, 480 Line Volts NFO Option NFO Neighbor Friendly Optic A34 347V Button Photocell A35 480V Button Photocell 6.5” (165.1 mm) Motion SCL-R Round Pole Mounted Occupancy Sensor up to 16' SCL-S Square Pole Mounted Occupancy Sensor up to 16' SCH-R Round Pole Mounted Occupancy Sensor 16' to 30' SCH-S Square Pole Mounted Occupancy Sensor 16' to 30' † When ordering with SiteSync, one of the following interface options must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node. Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2017 Mounting Options SMT Surface Mount Tenon7 SM2 Stanchion Mount Tenon7 For Pole Spec Select: http://www.kimlighting.com/ products/arms_and_poles/ WM2 Wall Mount Tenon7 For Control Spec Select: http://trpssl.com/index.html MTM-2B Twin Mount Tenon MTM-3E Triple Mount Tenon 1 2 3 4 5 6 7 User-defined distributions must include IES# file where indicated Custom colors subject to additional charges, minimum quantites and extended lead times. Consult representative. Indicates mounting position of fixture. Not available with other control or sensor options. Specify group and zone. See SiteSync product page www.hubbelllighting.com/controls/sitesync for more details. Specify time delay; dimming level and mounting height. Not for use with MTM-2B or MTM-3E options. | 1 | ARFX16 ArcheType® X Flood Luminaire kl_arfx16_spec.pdf ARFX16 — FLOOD Distribution Type Photometrics (3000K) Field Angle 10% max Lumens 350 mA 400 mA 450 mA 500 mA 550 mA 600 mA 650 mA 700 mA Wide Flood 10385 11431 12305 13323 14342 15372 16403 17433 Vertical Flood 11540 12702 13673 14804 15936 17081 18226 19371 Medium Flood 10887 11984 12900 13968 15035 16115 17196 18276 Narrow Flood 11503 12661 13629 14757 15885 17026 18168 19309 Distribution Type Photometrics (4000K) Field Angle 10% max Lumens 350 mA 400 mA 450 mA 500 mA 550 mA 600 mA 650 mA 700 mA Wide Flood 10975 12106 13306 14464 15621 16751 17882 19012 Vertical Flood 12721 14032 15423 16765 18107 19417 20727 22037 Medium Flood 12749 14063 15458 16802 18147 19460 20773 22086 Narrow Flood 13250 14616 16066 17463 18860 20225 21589 22954 Photometrics (5000K) Distribution Type Field Angle 10% max Lumens 350 mA 400 mA 450 mA 500 mA 550 mA 600 mA 650 mA 700 mA Wide Flood 11954 13442 14930 16418 17757 19097 20437 21777 Vertical Flood 12733 14318 15903 17488 18915 20343 21770 23197 Medium Flood 12110 13617 15125 16632 17990 19347 20705 22062 Narrow Flood 12867 14469 16070 17672 19114 20557 21999 23441 ELECTRICAL CHARACTERISTICS Electrical Optical System Line Voltage Amps AC Current System Watts 120 208 240 277 347 480 350 mA 110 0.92 0.53 0.46 0.40 0.32 0.23 400 mA 124 1.03 0.60 0.52 0.45 0.36 0.26 450 mA 138 1.15 0.66 0.58 0.50 0.40 0.29 500 mA 152 1.27 0.73 0.63 0.55 0.44 0.32 550 mA 167 1.39 0.80 0.70 0.60 0.48 0.35 VAC LEAR™ Dimming 120-480 Hz 50/60 600 mA 182 1.52 0.88 0.76 0.66 0.52 0.38 650 mA 196 1.63 0.94 0.82 0.71 0.56 0.41 700 mA 211 1.76 1.01 0.88 0.76 0.61 0.44 TM-21 LIFETIME CALCULATION Optical System Ambient Environment °C LEAR™ 25 Min. Power Factor >0.9 Source current out of 0-10V purple wire Max THD Dimming (%) Range 20 10% to 100% Absolute voltage range on 0-10V (+) purple wire Min Max Min Max 0mA 1mA 0V 10V LED COLOR Projected Lumen Maintenance 16 26 TM-21 60 100 97.55% 96.37% 92.45% 88.05% Reported L70 > 36,000 hrs 3K Designation 3000K CRI Minimum S/P Ratio ≥72 1.33 Spectroradiometric 4K 4000K ≥72 1.66 5K 5000K ≥72 1.78 Kim Lighting reserves the right to change specifications without notice. Consult factory for Amber, Turtle Friendly, Gulf Coast and Observatory applications. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2017 | 2 | ARFX16 ArcheType® X Flood Luminaire kl_arfx16_spec.pdf SPECIFICATIONS Housing: ■■ Low copper aluminum alloy die-casting designed as one-piece with external cooling ribs. ■■ Solid cast aluminum walls between the housing and arm create a thermal barrier between the optical and electrical compartments. ■■ ■■ olded silicone gaskets throughout to insure M sealing between the two compartments and ingress protection. ousing designed with integral Type X thermal H transfer “turrets” utilized for both thermal transfer and to secure location of the LEAR™ Optical Module. The turrets are spaced in rows of 4 X 4, designed to optimize photometric performance for standard and Type X userdefined distributions. ■■ Tempered UV coated flat lens for low glare. ■■ IK09 rated enclosure protects electrical equipment against external mechanical impacts. Lens Frame: ■■ ■■ ■■ ■■ IP66 certified to protect the interior components from dust and water ingress. Finish: ■■ ■■ Open circuit fault will turn off the luminaire protecting the sensitive electronics and acting as a signal for maintenance. ■■ Programmable Driver is rated for -40°F starting. ■■ “Thermal Shield” Primary Side thermister Protection for sustainable life of LEAR modules and electronic components. ■■ ■■ defined beam patterns. 3000K, 4000K, 5000K standard CCT. Amber and other custom color temperatures available. ■■ ■■ Factory adjusted distributions created from user-defined IES files. ■■ Toolless 355° rotation adjustment and 70° tilt adjustment with a tamper resistant fastener. ■■ T ype X LEAR modules are IP66 rated and utilize six high output LEDs, positioned beneath a precision, high purity molded acrylic prism. Fuse Options: SF for 120, 277 and 347 Line Volts DF for 208, 240 and 480 Line Volts. High temperature fuse holders factory installed ■■ inside the fixture arm. Fuse is included. Certifications and Listings: UL 1598 Standard for Luminaires. L 8750 Standard for Safety for Light U Emitting Diode (LED) Equipment for use in Lighting Products. ■■ CSA C22.2#250.0 Luminaires. provided for user access to the dimming circuitry. ■■ ANSI C136.31-2010 3G Vibration tested Dimming circuitry compatible with 0-10V ■■ RoHS compliant. user-defined control devices. ■■ IP66 certified. Optional factory programmed dimming profile. ■■ IEC 66262 Mechanical Impact Code IK09. Dimming range from 10% to 100% by the Modular wiring harness in the service area Standard Input Black (+) White (-) Green (GND) Turret alignment and thermal transfer design Optimized standard distribution or user- S tandard colors include (BL) Black, (DB) Dark Bronze, (GT) Graphite, (PS) Platinum Silver, (LG) Light Gray, (TT) Titanium, (WH) White, and (CC) Custom Color (Include RAL#). ■■ use of its standard 0-10V interface on the programmable driver. ■■ ■■ ■■ Dimming: ■■ applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat. Maximum lightning surge current 20KA with thermally protected varistor technology. Surge suppression is series circuited preventing total fixture failure. ■■ Fade and abrasion resistant, electrostatically Electrical components are located in the arm. and compliant. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes, Failure to do so may result in serious personal injury. ■■ Gray Dimming Lead (-) allow for freedom of adjustability and precision of the LEAR LED array. ■■ Luminaire housing adjustable +30° and -5 via locking fastener under the arm cover. ■■ drive current settings from 350mA to 700mA. Type X LEAR™ Optical Module: ■■ Internally accessible slip-fitter provided. Attaches to a 1-1/4” to 2-3/8” tenon. ■■ Standard programmable driver for variable Molded silicon gasket seal to isolate arm from the optical chamber. Molded silicone gasket assembles into a cast channel in the doorframe sealing the 3/16” thick low iron-content, tempered glass lens against the housing upon closure. T argeted optics minimize pixilation concerns to provide outstanding performance, uniformity and glare control. Electrical Components: One-piece, die-cast, low copper aluminum alloy secured to housing with eight captive, tamper-resistant stainless steel fasteners. ■■ ■■ Fixture Housing Purple Dimming Lead (+) 30 mA Max Arm: Low copper aluminum alloy, two piece die-casting designed and gasketed to function as one-piece. ■■ WARRANTY: ■■ F or full warranty see: http://www. hubbelllighting.com/resources/warranty External cooling ribs create continuous aesthetic and thermal path. ■■ Molded silicone gasket seals the wiring channel separating the arm from the housing thermally insulating the electronic components. ■■ Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2017 | 3 | ARFX16 ArcheType® X Flood Luminaire kl_arfx16_spec.pdf CONTROLS Photocell Receptacle WIR-RMI-IO A25-7H or A25-7V 120 - 347V 1000 Foot Range WiScape RF mesh control system with off/on/dim, motion, photo, GPS location, alert, monitoring and metering capabilities. Fully gasketed and wired 7-pin receptacle standard. Easy access location above the electrical compartment. 7-pin construction allows user-defined interface and control definition of operational performance. ANSI twist-lock control module by-others. H (Horizontal) or V (Vertical) indicates mounting position of fixture. Standard customer operation modes: 1. Tradional on/off photoelectric control. 2. 5-pin wireless photoelectric control for added dimming feature. 3. 7-pin wireless photoelectric control for dimming and additional I/O connections for customer use. Dimming Grey Wire White Wire Brown Wire Black Wire Dimming Grey Wire Orange Wire Red Wire Button Photocell SiteSync™1 SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www.hubbelllighting.com/products/sitesync for more details. Pole Mounted Round Pole-Mounted Occupancy Sensor up to 16' SCL-R Round Pole-Mounted Occupancy Sensor up to 16’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCL-R4 2 /2773 /BL 4 A30 for 120V, A31 for 208V, A32 for 240V, A33 for 277V, A35 for 347V, A34 for 480V, Factory installed photocell inside housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others. Wireless Control Hubbell Control Solutions' wiSCAPE In-Fixture Module is a bidirectional wireless RF device that allows an individual fixture to be managed, monitored and metered. The wiSCAPE In-Fixture Module communicates wirelessly over a robust 2.4GHz ISM (Industrial, Scientific and Medical) certified meshed radio signal. The wiSCAPE Fixture Module drastically simplifies control and automation of projects, especially in retrofit environments and challenges the legacy world of wired-systems. wiSCAPE wireless control technology adapts easily to complex automation situations for quick, simple and economical commissioning. On-Fixture Module is compatible with A-25-7H option. ™ Square Pole-Mounted Occupancy Sensor up to 16' SCL-S Square Pole-Mounted Occupancy Sensor up to 16’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for square pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCL-L/2773 /BL 4 Round Pole-Mounted Occupancy Sensor 16’ to 30’ SCH-R Round Pole-Mounted Occupancy Sensor: 16' to 30’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCH-R4 2 /2773 /BL 4 Square Pole-Mounted Occupancy Sensor 16’ to 30’ SCH-S Square Pole-Mounted Occupancy Sensor: 16 to 30’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCH-S/2773 /BL 4 SCP The SCP is a photo-control with motion sensing accessory thats mounts to the side of any new or existing 3”-5” round or square straight pole. The SCP enables any pole mounted luminaire in excess of 75 watts, to meet California Title 24 requirements with integral 20KV/10KA surge protection for added reliability and serviceability. For more detail: http://www.aal.net/products/sensor_control_ programmable PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.HubbellLighting.com/products/ sitesync or contact Hubbell Lighting tech support at (800) 345-4928. 1 SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens. Examples: SiteSync only : ARX25/1/3K35UV/PS/US/SWP SiteSync with Motion Control: ARX25/1/3K35UV/PS/US/SWPM-20F MOB ORDERING INFORMATION: When ordering a fixture with a dimming occupancy sensor option (MOB), please specify the appropriate information. These settings are specified in the ordering as shown in the example below. ARX25/1/3k35UV/PS/US/MOB - 1 to 30 min - 33%or 50% - ?? / DBT High to Dim Delay Low Level Mounting Height (ft.) Voltage, Color, Pole Diameter, 2 3 4 Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2017 | 4 | ARFX16 ArcheType® X Flood Luminaire kl_arfx16_spec.pdf MOUNTING OPTIONS Surface Mount Tenon SMT/BL Stanchion Mount Tenon SM2/BL 2" pipe-size tenon (2-3/8“ O.D., 2" I.D.). Welded to a cast aluminum plate. Plate has four 1/2” mounting holes, and tenon has one 1/2” NPT for side conduit entry. Black finish. 2" tenon. 4" O.D. cast low copper (<0.6% Cu) aluminum stanchion with 2" pipe-size tenon (2-3/8“ O.D., 1-3/8“ I.D.) for mounting a single fixture or multiple top-mounts. Black finish. 2" (51 mm) Pipe-Size Tenon 2" (51 mm) Pipe-Size Tenon K" NPT (13 mm) Conduit Entry K" NPT (13 mm) Conduit Entry (4) K" DIA. (4) K" DIA. (13 mm) (13 mm) Holes on 5K" 5" circle (140 mm) Holes on 5" circle (127 mm) (127 mm) 5" sq. Wall Mount Tenon WM2/BL, WM2/DB, WM2/LG, WM2/SG, WM2/PS, WM2/WH 2" pipe-size tenon (2-3/8“ O.D., 2" I.D.). Welded to an extruded aluminum arm with a removable end cap for wiring access. Arm is welded to a cast aluminum plate with two 1/2” mounting holes. Pipe-Size Tenon (51 mm) Pipe-Size Tenon (51 mm) 2" Pipe-Size Tenon (512" mm) 2" Pipe-Size Tenon (512" mm) 4" DIA. 4" DIA. (102 mm) (102 mm) 2" Pipe-Size Tenon (51 mm) 2" Pipe-Size Tenon (51 mm) 4" 2" (51 mm) 4" (101.6 mm) 1" MIN. (25 mm) Pipe-Size Tenon 12J" (101.6 1" MIN. (25 mm) 4" mm) DIA. 4K" 12J" 7K" MAX. (192 mm) (311 mm) 4K" mm) (102 mm) 7K"(114 MAX. (192 mm) (311 mm) (114 mm)K" NPT (13 mm) 4" (101.6 mm) 1" MIN. (25 mm) Conduit Entry 12J" 4K" 7" 5K" 7K" MAX. (192 mm) (311 mm) 7" (114 mm) (178 mm) (140(4) mm)K" DIA. 13K" (178 mm) 13K"(13 (343 mm) mm) (343 mm) 7" Holes on 5K" (178 mm) (140 mm) 13K" 5" circle 16F" 5"(127 sq. (343 16F" mm) mm) (411 mm) (127 mm) (411 mm) (127 mm) 16F" 5" sq. (127 mm) I.D. 3K" I.D. 3K" (411 mm) (89 mm) (89 mm) I.D. 3K" (89 mm) Twin Mount Tenon Triple Mount Tenon 2" Pipe-Size Tenon (51 mm) 2" Pipe-Size Tenon (51 mm) 2" (51 mm) MTM-2B/BL, MTM-2B/LG, MTM-3E/BL, MTM-3E/DB, MTM-3E/LG, Pipe-Size MTM-2B/DB, Tenon 4" DIA. (102 2" Pipe-Size Tenon (51mm) mm) MTM-2B/SG, MTM-2B/WH MTM-3E/SG, MTM-3E/PS, MTM-3E/WH 2" Pipe-Size Tenon (51 mm)4" 2" mm) (13MTM-2B/PS, K"(51NPT mm) (2) 2" Pipe-Size Tenons (51 mm) Pipe-Size Tenon 1"4"MIN. DIA.(25 mm) Conduit Entry Tenons (51 mm) (2) 2" aluminum Pipe-Size 4K" Extruded support20" continuously Extruded aluminum support 12J" continuously 7K" mm) on center (508 mm) (102MAX. mm) (192 mm) (114 mm) 20" on (508 mm) (3)(51 2"mm) Pipe-Size(311 Tenons (51 mm) K" (13center mm) 4" (4) NPT K" DIA. (3) 2"welded Pipe-Size Tenons 1" MIN. (25 mm) welded to a heavy cast aluminum slipfitter(101.6 mm) (13to mm)a heavy Conduit Entry cast aluminum slipfitter (2) 2" Pipe-Size Tenons (51 mm) 20" on center (508 mm) 12J" 27K" 4K" 20" on center (508 mm) 7K" MAX. (192 mm) 27K" 5K" 7" (311 mm) Holes on (699 mm) (114 mm) 20" on center (508 mm) hub which the for strength. The hub which cradles the arm for 47K" strength. The (699 mm)arm (4) K" cradles DIA. mm) (3) 2"(178 Pipe-Size Tenons (51 mm) (140 mm) 13K" 5" circle 47K" (13 mm) (1207 mm) (343 mm) (127 mm) 20"7"on center (508 mm) (1207contains mm) 27K" hub slipfitter hub recessed 3/8" slipfitter four recessed 3/8" Holes oncontains four5K" (699 mm) (178 mm) 13K" 5" circle 47K" stainless steel allen head(140 setmm) point screws for stainless steel allen head set16F" point screws for (343 mm) (127 mm) (1207 mm) 5" sq. (411 mm) (127 mm) mounting to steel pole 10" with steel 2" pipe size mounting to steel pole with steel 2" pipe size 16F" 10" (254.0 mm) 5" sq. tenon O.D. x 4-1/4"). Cast aluminum tenon (2-3/8“ O.D. x 4-1/4"). Cast aluminum (411 mm) (254.0(2-3/8“ mm) (127 mm) 3K" end caps and center cap provide access toI.D. field end caps and center cap provide access to field 10" (89mm) mm) Option with Steel 10" (254.0 Option with Steel 10" (254 mm) splice connections. splice connections. 2" Pipe-Size Tenon (50.8 (254mm) mm) (101.6 mm) 2" Pipe-Size Tenon (50.8 mm) I.D. 3K" (SM2, SMT or Steel KIM (89 Pole) mm) Option with Steel Option with Steelfor mounting (SM2, SMT or Steel for KIMmounting Pole) Option with Steel 10"Tenon CAUTION: Approved to poles CAUTION: Approved to (51 poles 2" Pipe-Size mm) (254 mm) 2" Pipe-Size (50.8 mm)Tenon (51 mm) 2" Pipe-Size Tenon (SM2, SMT or Steel KIM Pole) with steel tenons only. steel tenons only. SMT or Steel KIM Pole) Option with Steel (SM2, SMT with or(SM2, Steel KIM Pole) (2) 2" Pipe-Size Tenons 25" on center (2) 2" Pipe-Size Tenons 25" on center 33" (838 mm) 33" (838 mm) 2" Pipe-Size Tenon (51 mm) (SM2, SMT or Steel KIM Pole) 57K" (1461 mm) 57K" (1461 mm) 8" (203 mm) 8" (203 mm) 8" (203 mm) (3) 2" Pipe-Size Tenons 25" on center (3) 2" Pipe-Size Tenons 25" on center 8" (203 mm) Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2017 | 5 |