Kl Ekg401 Spec
2016-08-26
: Pdf Kl Ekg401 Spec kl_ekg401_spec spec products kim
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
EKG401 Shoebox Luminaire revision 8/1/16 • kl_ekg401_spec.pdf Type: Job: Catalog number: / EKG401 Approvals: 3000K and warmer CCTs only / / Mtg. Fixture Electrical Module Finish See page 2 / / Options See page 3 Pole Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for arm fitting. Specifications 8" 203 mm 16H" 19O" 424 mm 503 mm 10" 254 mm side view 2K" 6" 64 mm 152 mm arm section front view Date: Page: 1 of 3 Housing: Fabricated from a one-piece extruded aluminum side panel with mitered corners that are internally welded and sealed for weathertightness. A press-formed aluminum top cover interlocks with housing, and has a continuous seal of silicone rubber resistant to weathering, moisture, UV and ozone. Top is peaked for increased strength and efficient water runoff. Reflector Module: Specular Alzak® optical segments are rigidly mounted within a die-cast aluminum enclosure that attaches to the housing as a one-piece module. HPS and PMH sockets are porcelain 4KV pulse rated mogul base. All reflector modules are factory prewired with quickdisconnect plug .. Lens Frame Assembly: A F" thick impact resistant clear tempered flat glass lens enclosed by a one piece molded high temperature gasket. Lens and gasket interlocks in an extruded aluminum frame which hinges at the pole end, and closes and tightly seals the optical chamber by four captive fasteners. Lens frame is removable without tools by means of quick-disconnecting hinges. Electrical Module: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Ballast assembly attaches to fixture using quick-disconnecting key slots. Fast field wiring is provided for by prewiring all electrical components with quick-disconnect plugs. Ballast is high power factor of 90% or better and with starting temperatures of -20°F. Fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. Support Arm: One piece rectangular extruded aluminum with internal centering guides. Luminaire-to-pole attachment is by internal mechanical draw bolts, and includes a pole reinforcing plate with wire strain relief. Finish: Fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat. Standard colors are Black, Dark Bronze, Light Gray, Platinum Silver, Titanium or White. Custom colors are available and subject to additional charges, minimum quantities and longer lead times. Consult representative. Optional Anodized Finish: Dark Bronze Architectural Class 1 Anodize over satin polish. Certification: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. Warranty: For full warranty see http://www.hubbelllighting.com/ resources/warranty. Listings and Ratings UL cUL 1598 standards1 1 IP66 Rated Suitable for wet locations. 25C Ambient KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. © 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716 EKG401 Shoebox Luminaire revision 8/1/16 • kl_ekg401_spec.pdf Type: Job: Page: 2 of 3 Standard Features Mounting Wall Mount Plan View: EPA: 2.1 4.2 3.5 4.5 5.0 n/a Cat. No.: l 1A l 2B l 2L1 l 3T1 l 4C1 l 1W 1 Side arm mounted EKG fixtures are not compatible for use with poles less than 3.5” in diameter at mounting location. Fixture Cat. No. designates fixture with standard mounting arm. Cat. No.: EKG401 Electrical Module HPS = High Pressure Sodium PMH = Pulse Start Metal Halide Cat. Nos. for Electrical Modules available: Lamp Lamp Line Watts Type Volts 250 HPS 277 High Pressure Sodium l 70HPS120 l 100HPS120 l 70HPS208 l 100HPS208 l 70HPS240 l 100HPS240 l 70HPS277 l 100HPS277 l 70HPS347 l 100HPS347 l 70HPS480 l 100HPS480 l 150HPS120 l 150HPS208 l 150HPS240 l 150HPS277 l 150HPS347 l 150HPS480 Lamp E-23K, Clear E-23K, Clear E-23K, Clear Socket Mogul Base Mogul Base Mogul Base ANSI Ballast S-62 S-54 S-55 Pulse Start Metal Halide l 200PMH120 l 200PMH208 l 200PMH240 l 200PMH277 l 200PMH347 l 200PMH480 Lamp T-15, Clear Socket Mogul Base ANSI Ballast M-136 l 200HPS120 l 200HPS208 l 200HPS240 l 200HPS277 l 200HPS347 l 200HPS480 l 250HPS120 l 250HPS208 l 250HPS240 l 250HPS277 l 250HPS347 l 250HPS480 E-23K, Clear Mogul Base S-66 E-18, Clear Mogul Base S-50 l 250PMH120 l 250PMH208 l 250PMH240 l 250PMH277 l 250PMH347 l 250PMH480 BT-28 or ED-28, Clear Mogul Base M-138, M-153 NOTE: Due to the Energy Independence and Security Act (EISA) of 2007, Kim Lighting can no longer supply probe start metal halide ballasts with its luminaires, effective January 1, 2009. Contact Kim Lighting for availability of replacement ballasts for warranty service claims. (Visit www.aboutlightingcontrols.org or the Library of Congress website for more details). Finish TGIC powder coat Optional Architectural Class 1 anodized finish is available at extra cost. Standard Finishes: Color: Black Dark Bronze Light Gray Platinum Silver Titanium White Custom Color1 Cat. No.: l BL l DB l LG l PS l TT l WH l CC Custom colors subject to additional charges, minimum quantities and extended lead times. Consult representative. Custom color description: 1 Optional Anodized Finish: (Available at extra cost.) Color: Dark Bronze Anodize Cat. No.: l DB-A © 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716 EKG401 Shoebox Luminaire revision 8/1/16 • kl_ekg401_spec.pdf Type: Job: Page: 3 of 3 Optional Features Wall Mounting Cat. No. l 1W l No Option. A modified arm containing an access hole to allow field splices within the arm. A wall embedment bracket (WEB) is provided to accept fixture mounting rods, and a trim plate shall be provided to cover the wall embedded junction box (J-box by others.) All exposed parts are finished to match the fixture. For concrete mounting only. 4J" 10J" 5F" Wall mount using wall embedment Wall Mount bracketOptional - J-box in wall (by others) using wall embedment bracket J-box in wall (by others) Polycarbonate Shield Cat. No. l LS l No Option Houseside Shield Cat. No. l HS l No Option Photocell Receptacle Cat. No. l A-25 l No Option For highly reduced light on houseside. Two shielding components permanently installed at the Kim factory. One component reduces light directly from the lamp; the other component reduces reflected light. Recommended for use with clear lamps only. Polycarbonate Shield Houseside Shield A fully gasketed receptacle installed above the electrical compartment for NEMA base photocell (by others). For all multiple-fixture pole mountings, one fixture has a receptacle to operate the others. Mounting (see page 2) Receptacle * Fixture with photocell receptacle s slave unit(s) * 1A, 1W * s 2L Allowable wattage per fixture: Poles Front view Side view Optional Polycarbonate Shield replaces standard tempered glass lens. One-piece vacuum formed clear polycarbonate. Polycarbonate Shield is semipyramidical in shape for high thermal resistance, impact resistance and light transmission. 250 watt maximum. NOTE: May be used with 400HPS in outdoor locations where ambient air temperature during fixture operation will not exceed 85°F. CAUTION: Use only when vandalism is anticipated to be high. Useful life is limited by discoloration caused by UV from sunlight and metal halide lamps. * s s 2B s * 3T s s s * 4C 70-250W See Kim Arms and Poles Selection Guide for a complete selection of square and round poles in aluminum or steel. © 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Instance ID : uuid:b0e462e2-dddb-3f43-b1ac-a630e718a81a Original Document ID : adobe:docid:indd:874981ff-a9ba-11e3-ae39-ca9986643ea8 Document ID : xmp.id:5934cffa-76f5-47ed-b32b-14014d27e72f Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:02 08:49:05-07:00 Derived From Instance ID : xmp.iid:f809f7f9-6f5b-4f34-9c81-a10d2e29f6f9 Derived From Document ID : adobe:docid:indd:874981ff-a9ba-11e3-ae39-ca9986643ea8 Derived From Original Document ID: adobe:docid:indd:874981ff-a9ba-11e3-ae39-ca9986643ea8 Derived From Rendition Class : default Create Date : 2016:08:02 08:49:05-07:00 Modify Date : 2016:08:02 08:57:15-07:00 Metadata Date : 2016:08:02 08:57:15-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Mode : UseThumbs Page Count : 3 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools