Kl Ekg401 Spec
2016-08-26
: Pdf Kl Ekg401 Spec kl_ekg401_spec spec products kim
Open the PDF directly: View PDF 
.
Page Count: 3
3000K and warmer CCTs only
EKG401
Shoebox Luminaire
revision 8/1/16 • kl_ekg401_spec.pdf
© 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Approvals:
Type:
Job:
Catalog number:
Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for arm fitting.
Specifications Housing: Fabricated from a one-piece extruded aluminum side
panel with mitered corners that are internally welded and sealed
for weathertightness. A press-formed aluminum top cover interlocks
with housing, and has a continuous seal of silicone rubber resistant
to weathering, moisture, UV and ozone. Top is peaked for increased
strength and efficient water runoff.
Reflector Module: Specular Alzak® optical segments are rigidly mounted
within a die-cast aluminum enclosure that attaches to the housing
as a one-piece module. HPS and PMH sockets are porcelain 4KV pulse
rated mogul base. All reflector modules are factory prewired with quick-
disconnect plug ..
Lens Frame Assembly: A F" thick impact resistant clear tempered
flat glass lens enclosed by a one piece molded high temperature
gasket. Lens and gasket interlocks in an extruded aluminum frame
which hinges at the pole end, and closes and tightly seals the optical
chamber by four captive fasteners. Lens frame is removable without
tools by means of quick-disconnecting hinges.
Electrical Module: All electrical components are UL and CSA
recognized, mounted on a single plate and factory prewired with
quick-disconnect plugs. Ballast assembly attaches to fixture using
quick-disconnecting key slots. Fast field wiring is provided for by
prewiring all electrical components with quick-disconnect plugs.
Ballast is high power factor of 90% or better and with starting
temperatures of -20°F. Fixtures must be grounded in accordance with
local codes or the National Electrical Code. Failure to do so may result
in serious personal injury.
Support Arm: One piece rectangular extruded aluminum with
internal centering guides. Luminaire-to-pole attachment is by internal
mechanical draw bolts, and includes a pole reinforcing plate with
wire strain relief.
Finish: Fade and abrasion resistant, electrostatically applied, thermally
cured, triglycidal isocyanurate (TGIC) polyester powdercoat. Standard
colors are Black, Dark Bronze, Light Gray, Platinum Silver, Titanium or
White. Custom colors are available and subject to additional charges,
minimum quantities and longer lead times. Consult representative.
Optional Anodized Finish: Dark Bronze Architectural Class 1
Anodize over satin polish.
Certification: Fixtures must be grounded in accordance with national,
state and/or local electrical codes. Failure to do so may result in serious
personal injury.
Warranty: For full warranty see http://www.hubbelllighting.com/
resources/warranty.
Date:
Page: 1 of 3
19O"
503 mm
16H"
424 mm
10"
254 mm
8"
203 mm
front view
side view
arm section
2K"
64 mm
6"
152 mm
/ EKG401 / / / /
Mtg. Fixture Electrical Module Finish Options
See page 3 Pole
See page 2
Listings and Ratings
UL cUL 1598 standards1 IP66 Rated 25C Ambient
1Suitable for wet locations.
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
EKG401
Shoebox Luminaire
revision 8/1/16 • kl_ekg401_spec.pdf
© 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Mounting
Fixture
Cat. No. designates fixture
with standard mounting
arm.
Plan View: Wall Mount
Page: 2 of 3
Type:
Job:
EPA: 2.1 4.2 3.5 4.5 5.0 n/a
Cat. No.: l 1A l 2B l 2L1 l 3T1 l 4C1 l 1W
Standard Features
Electrical Module
HPS = High Pressure
Sodium
PMH = Pulse Start Metal
Halide
Cat. No.: EKG401
Lamp Lamp Line
Watts Type Volts
250 HPS 277
High Pressure Sodium
l 70HPS120 l 100HPS120 l 150HPS120 l 200HPS120 l 250HPS120
l 70HPS208 l 100HPS208 l 150HPS208 l 200HPS208 l 250HPS208
l 70HPS240 l 100HPS240 l 150HPS240 l 200HPS240 l 250HPS240
l 70HPS277 l 100HPS277 l 150HPS277 l 200HPS277 l 250HPS277
l 70HPS347 l 100HPS347 l 150HPS347 l 200HPS347 l 250HPS347
l 70HPS480 l 100HPS480 l 150HPS480 l 200HPS480 l 250HPS480
Lamp E-23K, Clear E-23K, Clear E-23K, Clear E-23K, Clear E-18, Clear
Socket Mogul Base Mogul Base Mogul Base Mogul Base Mogul Base
ANSI Ballast S-62 S-54 S-55 S-66 S-50
Cat. Nos. for Electrical Modules available:
NOTE: Due to the Energy Independence and Security Act (EISA) of 2007, Kim Lighting can no longer supply probe start
metal halide ballasts with its luminaires, effective January 1, 2009. Contact Kim Lighting for availability of replacement
ballasts for warranty service claims.
(Visit www.aboutlightingcontrols.org or the Library of Congress website for more details).
Finish
TGIC powder coat
Optional Architectural
Class 1 anodized finish is
available at extra cost.
1Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:
Standard Finishes:
Color: Black Dark Bronze Light Gray Platinum Silver Titanium White Custom Color1
Cat. No.: l BL l DB l LG l PS l TT l WH l CC
Optional Anodized Finish: (Available at extra cost.)
Color: Dark Bronze Anodize
Cat. No.: l DB-A
Pulse Start Metal Halide
l 200PMH120 l 250PMH120
l 200PMH208 l 250PMH208
l 200PMH240 l 250PMH240
l 200PMH277 l 250PMH277
l 200PMH347 l 250PMH347
l 200PMH480 l 250PMH480
Lamp T-15, Clear BT-28 or ED-28, Clear
Socket Mogul Base Mogul Base
ANSI Ballast M-136 M-138, M-153
1Side arm mounted EKG fixtures are not compatible for use with poles
less than 3.5” in diameter at mounting location.
EKG401
Shoebox Luminaire
revision 8/1/16 • kl_ekg401_spec.pdf
© 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Houseside Shield
Cat. No. l HS
l No Option
Photocell Receptacle
Cat. No. l A-25
l No Option
Page: 3 of 3
Type:
Job:
Optional Features
Wall mount using wall embedment
bracket - J-box in wall (by others)
4J"
10J"
5F"
Optional Wall Mount
using wall embedment bracket
J-box in wall (by others)
A modified arm containing an access hole to allow
field splices within the arm. A wall embedment bracket
(WEB) is provided to accept fixture mounting rods,
and a trim plate shall be provided to cover the wall
embedded junction box (J-box by others.) All exposed
parts are finished to match the fixture. For concrete
mounting only.
Optional Polycarbonate Shield replaces standard
tempered glass lens. One-piece vacuum formed
clear polycarbonate. Polycarbonate Shield is semi-
pyramidical in shape for high thermal resistance, impact
resistance and light transmission. 250 watt maximum.
NOTE: May be used with 400HPS in outdoor locations
where ambient air temperature during fixture operation
will not exceed 85°F.
CAUTION: Use only when vandalism is anticipated to
be high. Useful life is limited by discoloration caused by
UV from sunlight and metal halide lamps.
For highly reduced light on houseside. Two shielding
components permanently installed at the Kim factory.
One component reduces light directly from the lamp; the
other component reduces reflected light. Recommended
for use with clear lamps only.
A fully gasketed receptacle installed above the electrical compartment for NEMA base photocell
(by others). For all multiple-fixture pole mountings, one fixture has a receptacle to operate the
others.
Wall Mounting
Cat. No. l 1W
l No Option.
Poly carbonate Shield
Cat. No. l LS
l No Option
Side view Front view
Polycarbonate
Shield
See Kim Arms and Poles Selection Guide for a complete selection of square and round poles
in aluminum or steel.
Poles
**
**
1A, 1W 2B
2L 3T 4C
Allowable wattage per fixture: 70-250W
Mounting (see page 2)
* Fixture with photocell receptacle
s slave unit(s)
s
s*
s s s s
s
Houseside
Shield
Receptacle
