Kl Etpled Spec

: Pdf Kl Etpled Spec kl_etpled_spec spec products kim

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

ET LED

Entablature® Large PicoPrism® LED
kl_etpled_spec.pdf
JOB

TYPE

NOTES

APPROVALS

FEATURES

Certifications

■
 F ull Cutoff PicoPrism technology
■
  Patented low profile luminaire1
■
 Available in 580nm, 3000K, 4000K and 5000K

 T ype 1, 2, 3, 4, 5, R, L distributions
■ 0
 -10V dimming drivers standard
■
  Sealed optical chamber, IP66 certified
■

standard CCT

3000K and warmer CCTs only

SPECIFICATIONS
23"

TOP
23"

(584 mm)

8"

(203 mm)

(584 mm)

16"

8"

(406 mm)

(203 mm)

SIDE

FRONT
TOP

BOTTOM

Max. Weight = 45 lbs. EPA 1.8 for 1A.
See Configuration for Additional EPAs.

ORDERING CODE

Configuration

1A
2B
2L
3T
3Y*
4C
1W
HSF

EPA

Fixture

1 Arm Side Mt. 1.8

Housing

2 Arm Side Mt. 3.6

ET Large, 80 LEDs

2 Arm Side Mt. 2.6
3 Arm Side Mt. 4.1

Electrical Module
Drive Current
P35 350mA PicoPrism
P70 700mA PicoPrism

Distribution
1 Type I

94W (350mA)
188W (700mA)

2
3
4
5
R
L

3 Arm Side Mt. 4.1
4 Arm Side Mt. 4.7
Single Wall Mt. n/a
Horizontal Slip- n/a
fitter Mount

Type II

Source
80L 80 LEDs

Type III
Type IV

Color Temperature2
2K 580nm3
3K 3000K
4K 4000K
5K 5000K

Type V
Type R, Right
Type L, Left

Fixture Finish
Black
Dark Bronze
Graphite
Light Gray
Platinum Silver
Titanium
White
Custom Color*

BL
DB
GT
LG
PS
TT
WH
CC

Voltages

120
208
240
277
347
480
1

120V1
208V1
240V1
277V1
347V4
480V4

120V through 277V
is a variable driver.

*Consult Representative

*Available round poles only. EPA is for Fixture only

Photocell Options

Fuse Options

A25-7 7-pin Photocell Receptacle

SF 120, 277, 347 Line Volts
DF 208, 240, 480 Line Volts

A30 120V Button Photocell

NFO Option

NFO Neighbor Friendly Optic.

Photometry available for
Type III/IV. All others,
consult factory.

A31 208V Button Photocell
A32 240V Button Photocell
A33 277V Button Photocell
A34 480V Button Photocell
A35 347V Button Photocell

Mounting Options

VSF Vertical Slipfitter Mount for

1
2

3

4

US Patent No. D568,521 S. Other patents pending.
For custom optics and color temperature
configurations, contact factory.
Turtle friendly. Maximum 500mA drive current
for 2K amber option.
347V & 480V currents may be supplied with
step-down transformer.

Side Arm Mount
2" pipe tenon, (2-3/8" O.D.) 3 3" O.D. Pole
SVSF Vertical Slipfitter Mount
3.5 3.5" O.D. Pole
square for 2" pipe tenon,
4 4" O.D. Pole
(2-3/8" O.D.)
5 5" O.D. Pole
6 6" O.D. Pole
SQ Square Pole

Optional Entablatures

A1
A2
A3
A4
A5
P6
P7
P8
P9
P10

Arch
Broken Arch
Stepped Arch
Stepped Brock Arch
Standard Entablature
Peak
Broken Peak
Stepped Peak
Stepped Brocken Peak
Stepped

Controls
Wireless

WIR-RMI-IO 120-347V, 1000' range, WiScape
RF mesh control system with
off/on/dim, motion, photo,
GPS location, alert, monitoring
and metering capabilities.
Motion

SCL-R Round Pole Mounted

Occupancy Sensor up to 16'

SCL-S Square Pole Mounted

Occupancy Sensor up to 16'

SCH-R Round Pole Mounted

Occupancy Sensor 16' to 30'

SCH-S Square Pole Mounted

Occupancy Sensor 16' to 30'

Kim Lighting reserves the right to change specifications without notice.
© 2016 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017

| 1 |

ET LED

Entablature® Large PicoPrism® LED
kl_etpled_spec.pdf

Projected Lumen Maintenance

Spectroradiometric
Color Rendering Index (CRI)
Power Factor

3000K Average
≥75
>.90

4000K Average
≥70
>.90

5000K Average
≥65
>.90

mA

50,000 hrs

100,000 hrs

350 mA

96.58%

94.30%

700 mA

91.99%

86.88%

Electrical Drive Current
350mA
Amps - AC
0.78
0.45
0.39
0.34
0.27
0.20

Volts - AC
120
208
240
277
347
480

System Watts
94
94
94
94
94
94

Volts - AC
120
208
240
277
347
480

700mA
Amps - AC
1.57
0.90
0.78
0.68
0.54
0.39

System Watts
188
188
188
188
188
188

B.U.G. Rating for 350mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare
Temperature
3000K
4000K
5000K

Type I
B3 U0 G3
B3 U0 G3
B4 U0 G4

Type II
B3 U0 G3
B3 U0 G3
B3 U0 G3

Type III
B2 U0 G2
B2 U0 G2
B2 U0 G2

Type III NFO
B2 U0 G2
B2 U0 G2
B2 U0 G2

Type IV
B0 U0 G2
B1 U0 G2
B1 U0 G3

Type IV NFO
B0 U0 G2
B0 U0 G2
B0 U0 G3

Type V
B3 U0 G2
B3 U0 G2
B3 U0 G2

Type L/R
B3 U0 G3
B3 U0 G3
B3 U0 G3

Type II
7175
9278
9566

Type III
7029
9191
9476

Type III NFO
6205
8023
8272

Type IV
7083
9159
9443

Type IV NFO
6398
8273
8530

Type V
7275
9407
9699

Type L/R
7091
9169
9453

Absolute Lumens for 350mA
Temperature
3000K
4000K
5000K

Type I
7231
9351
9641

B.U.G. Rating for 700mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare
Temperature
3000K
4000K
5000K

Type I
B4 U0 G4
B4 U0 G4
B4 U0 G4

Type II
B3 U0 G3
B4 U0 G4
B4 U0 G4

Type III
B3 U0 G3
B3 U0 G4
B3 U0 G4

Type III NFO
B3 U0 G3
B3 U0 G4
B3 U0 G4

Type IV
N/A
B1 U0 G4
B1 U0 G4

Type IV NFO
N/A
B0 U0 G4
B0 U0 G4

Type V
B4 U0 G2
B4 U0 G2
B4 U0 G2

Type L/R
B3 U0 G3
B3 U0 G3
B3 U0 G3

Type II
12862
15479
16923

Type III
13448
16185
17695

Type III NFO
11960
14393
15736

Type IV
12708
15294
16721

Type IV NFO
11511
13853
15146

Type V
13597
16364
17891

Type L/R
12570
15128
16540

Absolute Lumens for 700mA
Temperature
3000K
4000K
5000K

Type I
12962
15600
17055

LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library.
For custom optics and color temperature configurations, contact factory.

Kim Lighting reserves the right to change specifications without notice.
© 2016 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017

| 2 |

ET LED

Entablature® Large PicoPrism® LED
kl_etpled_spec.pdf

Optional Entablatures (Entabs)

Arched Entablatures

Peaked Entablatures

Arch

Cat. No. A1

Peak

Cat. No. P6

Broken Arch

Cat. No. A2

Broken Peak

Cat. No. P7

Stepped Arch

Cat. No. A3

Stepped Peak

Cat. No. P8

Stepped Broken Arch

Cat. No. A4

Stepped Broken Peak

Cat. No. P9

Stepped

Cat. No. P10

Standard Entablature
Cat. No. A5
Follows fixture body profile
Specify Entablature and color.
Example: [ A2/LG ]

Entablature Specifications: Stamped from .090" aluminum sheet,
mechanically attached to front and back of housing with no visible
fasteners. For custom colors and/or custom Entablatures, consult your Kim
representative. See page 1 for dimensions.

Kim Lighting reserves the right to change specifications without notice.
© 2016 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017

| 3 |

ET LED

Entablature® Large PicoPrism® LED
kl_etpled_spec.pdf

SPECIFICATIONS
Housing:
■■

Extruded low copper aluminum main body.

■■

 ie-cast low copper aluminum electrical
D
gear compartment.

■■

Stainless steel hardware.

■■

 ie cast wall separates the optical
D
and electrical compartment acting
as thermal barrier.

■■

Electrical gear compartment doors are
fastened with two hinges and a latch made
of stainless steel.

■■

■■

0 -10V dimming interface.

Finish:

■■

All electronic components are IP66 rated.

■■

■■

Electronic components are UL and/or CSA

F ade and abrasion resistant, electrostatically
applied, thermally cured, triglycidal
isocyanurate (TGIC) polyester powdercoat.

■■

Standard colors include (BL) Black, (DB) Dark

recognized.
■■

S tandard programmable driver for variable
drive current settings from 350mA to 700mA.

Dimming:
■■

10% to 100% dimming using standard 0-10V
interface driver.

■■

To activate the dimming system, a wiring
harness is supplied and attached to the DIM
Port (DIM IN) on the thermal shield protection
system. This port allows the 0-10V Interface to
bypass the thermal shield and control the driver.

S ilicone gaskets seal the compartments at the
barrier surface.

Optical Module:
■■

P icoPrism® refractors (enclosed LED PCBs for
IP66 rating) aimed toward the task and spreads
horizontally to produce great uniformity.

■■

T he thermal shield works in conjunction with
the control system to assure that overheating
will not harm the LEDs.

■■

T ype I, II, III, IV, V, L (left), and R (right)
standard distributions. Custom available.

■■

The wiring harness is connected with the use

■■

■■
■■

■■

 ie-cast, low copper aluminum heat sink
D
modules provide thermal transfer at
PCB level.

Gray Dimming Lead (-)
Fixture
Housing

Neighbor Friendly Optic
 ptional integrated Neighbor Friendly Optic
O
on each LED module to completely control
unwanted backlight. Most effective with Type
III and IV distibutions.

■■

■■

120V through 480V @ 50/60Hz.

■■

Class 2, 350mA or 700mA

■■

Power Factor = >.90

■■

National Electrical Code, ANSI/NFPA 70.

■■

10kV surge suppression.

■■

Thermal shield thermal control.

■■

-30c starting driver.

SF for 120, 277 and 347 Line Volts
DF for 208, 240 and 480 Line Volts.
■■

High temperature fuse holders factory installed
inside the fixture housing. Fuse is included.

Certifications and Listings:
■■

 L 1598 Standard for wet locations for
U
Luminaires.

■■

 L 8750 Standard for Safety for Light
U
Emitting Diode (LED) Equipment for use
in Lighting Products.

■■

IP66 certified.

■■

CSA C22.2#250.0 Luminaires.

■■

 NSI C136.31-2010 3G Vibration tested
A
and compliant.

■■

RoHS compliant.

■■

IDA approved, 3000K and warmer CCTs only.

CAUTION:
■■

Fixtures must be grounded in accordance
with national, state and/or local electrical
codes, Failure to do so may result in serious
personal injury.

S peed Mount is square or circular cut for
specified pole size and shape.

■■

Die-cast, low copper aluminum support arm

WARRANTY:

for direct pole mount.

■■

■■

Die-cast aluminum tool-less entry splice

F or full warranty see http://www.
hubbelllighting.com/resources/warranty

access cover.

Electrical Characteristics:
Pre-assembled, aluminum gear tray.

S peed Mount and a reinforcing plate are
provided with wire strain relief.

Fusing:

■■

■■

■■

Purple Dimming Lead (+)
30 mA Max

Support Arm:

One-piece low copper aluminum alloy die-cast
is secured to housing with two toolless latches.

■■

Standard Input Black (+)
White (-)
Green (GND)

IP66 certified.

Lens Frame:
■■

of the Purple lead as the positive (+) and the
Grey lead as the negative (-) to an available
control signal (by others).

 000K, 4000K, 5000K standard CCT.
3
Amber and custom available.

 nodized aluminum carrier plate and heat sink
A
modules.

Bronze, (GT) Graphite, (WH) White, (PS)
Platinum Silver, (LG) Light Gray, (TT) Titanium,
and (CC) Custom Color (Include RAL#).

Terminal block is mounted in the arm cavity
and accepts #14 to #8 wire sizes.

■■

P rewired to electrical module with
quick-disconnect plugs located inside
the electrical compartment.

■■

Optional cast, low copper aluminum horizontal
slip-fitter with adaptor plate to secure the
luminaire to 1-1/4” to 2” IPS pipe size arms.

■■

 ptional cast aluminum wall mount plate
O
assembly. Attaches to the wall over the
junction box. Luminaire attaches to the wall
plate with a square cut Speed Mount.

Kim Lighting reserves the right to change specifications without notice.
© 2016 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017

| 4 |

ET LED

Entablature® Large PicoPrism® LED
kl_etpled_spec.pdf

CONTROLS

Photocell Receptacle

Wireless Control

A25-7

Hubbell Building Automation’s wiSCAPE
In-Fixture Module is a bi-directional wireless
RF device that allows an individual fixture to be
managed, monitored and metered. The wiSCAPE
In-Fixture Module communicates wirelessly
over a robust 2.4GHz ISM (Industrial, Scientific
and Medical) certified meshed radio signal. The
wiSCAPE Fixture Module drastically simplifies
control and automation of projects, especially in
retrofit environments, and challenges the legacy
world of wired-systems. wiSCAPE wireless control
technology easily adapts to complex automation
situations for quick, simple and economical
commissioning. The On-Fixture Module is
compatible with A-25-7H option.
™

Fully gasketed and wired 7-pin receptacle
option. Easy access location above the electrical
compartment. 7-pin construction allows for a
user-defined interface and provides a controlled
definition of operational performance. ANSI
twist-lock control module by-others.
Standard customer operation modes:
1. Traditional on/off photoelectric control.
2. 5-pin wireless photoelectric control
for added dimming feature.
3. 7-pin wireless photoelectric control for
dimming and additional I/O connections for
customer use.
Gray Wire
0-10V Dimming

Black Wire
Line Voltage

White Wire
Neutral

Purple Wire
0-10V Dimming

Brown Wire
10V Customer
Defined
Red Wire
Line Voltage

Orange Wire
10V Customer
Defined

Button Photocell
A30 for 120V, A31 for 208V, A32 for 240V,
A33 for 277V, A35 for 347V, A34 for 480V,
Photocell is factory installed inside the housing
with a fully gasketed sensor on the side wall. For
multiple fixture mountings, one fixture is supplied
with a photocell to operate the others.

WIR-RMI-IO
120 - 347V 1000 Foot Range WiScape RF mesh
control system with off/on/dim, motion, photo,
GPS location, alert, monitoring and metering
capabilities.

Pole Mounted
Round Pole-Mounted Occupancy
Sensor up to 16'
SCL-R

Round Pole-Mounted Occupancy
Sensor 16’ to 30’
SCH-R
Round Pole-Mounted Occupancy Sensor: 16' to
30’ - an outdoor occupancy sensor with 0-10V
interface dimming control that mounts directly
to the pole. Wide 360° pattern. Module colors
are available in Black, Gray, and White. Module
is cut for round pole mounting. Pole diameter is
needed upon order. Poles to be drilled in the field
will be provided with installation instructions.
Ordering Example: SCH-R41/2772/BL 3

Square Pole-Mounted Occupancy
Sensor 16’ to 30’
SCH-S
Square Pole-Mounted Occupancy Sensor: 16 to
30’ - an outdoor occupancy sensor with 0-10V
interface dimming control that mounts directly
to the pole. Wide 360° pattern. Module colors
are available in Black, Gray, and White. Module
is cut for round pole mounting. Pole diameter is
needed upon order. Poles to be drilled in the field
will be provided with installation instructions.
Ordering Example: SCH-S/2772/BL 3

SCP

Round Pole-Mounted Occupancy Sensor up to
16’ - an outdoor occupancy sensor with 0-10V
interface dimming control that mounts directly
to the pole. Wide 360° pattern. Module colors
are available in Black, Gray, and White. Module
is cut for round pole mounting. Pole diameter is
needed upon order. Poles to be drilled in the field
will be provided with installation instructions.

The SCP is a photo-control with motion sensing
accessory thats mounts to the side of any new
or existing 3”-5” round or square straight pole.
The SCP enables any pole mounted luminaire in
excess of 75 watts, to meet California Title 24
requirements with integral 20KV/10KA surge
protection for added reliability and serviceability.

Ordering Example: SCL-R4 /277 /BL

http://www.aal.net/products/sensor_control_
programmable

1

2

3

For more detail:

Square Pole-Mounted Occupancy
Sensor up to 16'
SCL-S
Square Pole-Mounted Occupancy Sensor up to
16’ - an outdoor occupancy sensor with 0-10V
interface dimming control that mounts directly
to the pole. Wide 360° pattern. Module colors
are available in Black, Gray, and White. Module
is cut for square pole mounting. Pole diameter is
needed upon order. Poles to be drilled in the field
will be provided with installation instructions.
Ordering Example: SCL-L/2772/BL 3
Pole Diameter, 2Voltage, 3Color

1

Kim Lighting reserves the right to change specifications without notice.
© 2016 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017

| 5 |