Kl Etpled Spec

2017-05-19

: Pdf Kl Etpled Spec kl_etpled_spec spec products kim

Open the PDF directly: View PDF .
Page Count: 5

| 1 |

JOB

NOTES

TYPE

APPROVALS

ET LED

Entablature® Large PicoPrism® LED

kl_etpled_spec.pdf

Kim Lighting reserves the right to change specications without notice.

P 626.968.5666 | F 626.369.2695 | www.kimlighting.com |

Rev. May. 16, 2017

SPECIFICATIONS

ORDERING CODE

FEATURES Certications



■ Full Cutoff PicoPrism technology



■ Patented low prole luminaire



■ Available in 580nm, 3000K, 4000K and 5000K

standard CCT



■ Type 1, 2, 3, 4, 5, R, L distributions



■ 0-10V dimming drivers standard



■ Sealed optical chamber, IP66 certied

Distribution

1Type I

2Type II

3Type III

4Type IV

5Type V

RType R, Right

LType L, Left

Housing

ET Large, 80 LEDs

94W (350mA)

188W (700mA)

Drive Current

P35 350mA PicoPrism

P70 700mA PicoPrism

Fixture

Optional Entablatures

A1 Arch

A2 Broken Arch

A3 Stepped Arch

A4 Stepped Brock Arch

A5 Standard Entablature

P6 Peak

P7 Broken Peak

P8 Stepped Peak

P9 Stepped Brocken Peak

P10 Stepped

Fuse Options

SF 120, 277, 347 Line Volts

DF 208, 240, 480 Line Volts

Electrical Module

Source

80L80 LEDs

Color Temperature2

2K 580nm3

3K 3000K

4K 4000K

5K 5000K

Controls

Max. Weight = 45 lbs. EPA 1.8 for 1A.

See Conguration for Additional EPAs.

Voltages

120 120V

208 208V

240 240V

277 277V

347 347V4

480 480V4

16"

(406 mm)

TOP

23"

(584 mm) 8"

(203 mm)

FRONT SIDE

TOP

23"

(584 mm)

BOTTOM

Conguration

EPA

1A 1 Arm Side Mt. 1.8

2B 2 Arm Side Mt. 3.6

2L 2 Arm Side Mt. 2.6

3T 3 Arm Side Mt. 4.1

3Y*3 Arm Side Mt. 4.1

4C 4 Arm Side Mt. 4.7

1W Single Wall Mt. n/a

HSF Horizontal Slip-

tter Mount

n/a

* Available round poles only. EPA is for Fixture only

Photocell Options

A25-7 7-pin Photocell Receptacle

A30 120V Button Photocell

A31 208V Button Photocell

A32 240V Button Photocell

A33 277V Button Photocell

A34 480V Button Photocell

A35 347V Button Photocell

US Patent No. D568,521 S. Other patents pending.

For custom optics and color temperature

congurations, contact factory.

Turtle friendly. Maximum 500mA drive current

for 2K amber option.

347V & 480V currents may be supplied with

step-down transformer.

Mounting Options

Side Arm Mount

33" O.D. Pole

3.5 3.5" O.D. Pole

44" O.D. Pole

55" O.D. Pole

66" O.D. Pole

SQ Square Pole

NFO Option

NFO Neighbor Friendly Optic.

Photometry available for

Type III/ IV. All others,

consult factory.

3000K and warmer CCTs only

VSF Vertical Sliptter Mount for

2" pipe tenon, (2-3/8" O.D.)

SVSF Vertical Sliptter Mount

square for 2" pipe tenon,

(2-3/8" O.D.)

Wireless

WIR-RMI-IO 120-347V, 1000' range, WiScape

RF mesh control system with

off/on/dim, motion, photo,

GPS location, alert, monitoring

and metering capabilities.

Motion

SCL-R Round Pole Mounted

Occupancy Sensor up to 16'

SCL-S Square Pole Mounted

Occupancy Sensor up to 16'

SCH-R Round Pole Mounted

Occupancy Sensor 16' to 30'

SCH-S Square Pole Mounted

Occupancy Sensor 16' to 30'

Fixture Finish

BL Black

DB Dark Bronze

GT Graphite

LG Light Gray

PS Platinum Silver

TT Titanium

WH White

CC Custom Color*

*Consult Representative

1120V through 277V

is a variable driver.

| 2 |

ET LED

Entablature® Large PicoPrism® LED

kl_etpled_spec.pdf

Kim Lighting reserves the right to change specications without notice.

P 626.968.5666 | F 626.369.2695 | www.kimlighting.com |

Rev. May. 16, 2017

Absolute Lumens for 350mA

Temperature Type I Type II Type III Type III NFO Type IV Type IV NFO Type V Type L/R

3000K 7231 7175 7029 6205 7083 6398 7275 7091

4000K 9351 9278 9191 8023 9159 8273 9407 9169

5000K 9641 9566 9476 8272 9443 8530 9699 9453

Absolute Lumens for 700mA

Temperature Type I Type II Type III Type III NFO Type IV Type IV NFO Type V Type L/R

3000K 12962 12862 13448 11960 12708 11511 13597 12570

4000K 15600 15479 16185 14393 15294 13853 16364 15128

5000K 17055 16923 17695 15736 16721 15146 17891 16540

B.U.G. Rating for 350mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare

Temperature Type I Type II Type III Type III NFO Type IV Type IV NFO Type V Type L/R

3000K B3 U0 G3 B3 U0 G3 B2 U0 G2 B2 U0 G2 B0 U0 G2 B0 U0 G2 B3 U0 G2 B3 U0 G3

4000K B3 U0 G3 B3 U0 G3 B2 U0 G2 B2 U0 G2 B1 U0 G2 B0 U0 G2 B3 U0 G2 B3 U0 G3

5000K B4 U0 G4 B3 U0 G3 B2 U0 G2 B2 U0 G2 B1 U0 G3 B0 U0 G3 B3 U0 G2 B3 U0 G3

B.U.G. Rating for 700mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare

Temperature Type I Type II Type III Type III NFO Type IV Type IV NFO Type V Type L/R

3000K B4 U0 G4 B3 U0 G3 B3 U0 G3 B3 U0 G3 N/A N/A B4 U0 G2 B3 U0 G3

4000K B4 U0 G4 B4 U0 G4 B3 U0 G4 B3 U0 G4 B1 U0 G4 B0 U0 G4 B4 U0 G2 B3 U0 G3

5000K B4 U0 G4 B4 U0 G4 B3 U0 G4 B3 U0 G4 B1 U0 G4 B0 U0 G4 B4 U0 G2 B3 U0 G3

Electrical Drive Current

350mA 700mA

Volts - AC Amps - AC System Watts Volts - AC Amps - AC System Watts

120 0.78 94 120 1.57 188

208 0.45 94 208 0.90 188

240 0.39 94 240 0.78 188

277 0.34 94 277 0.68 188

347 0.27 94 347 0.54 188

480 0.20 94 480 0.39 188

Spectroradiometric

3000K Average 4000K Average 5000K Average

Color Rendering Index (CRI) ≥75 ≥70 ≥65

Power Factor >.90 >.90 >.90

LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library.

For custom optics and color temperature configurations, contact factory.

Projected Lumen Maintenance

mA 50,000 hrs 100,000 hrs

350 mA 96.58% 94.30%

700 mA 91.99% 86.88%

ET LED

Entablature® Large PicoPrism® LED

kl_etpled_spec.pdf

| 3 |

Kim Lighting reserves the right to change specications without notice.

P 626.968.5666 | F 626.369.2695 | www.kimlighting.com |

Rev. May. 16, 2017

Arched Entablatures Peaked Entablatures

Specify Entablature and color.

Example: [ A2/LG ]

Entablature Specifications: Stamped from .090" aluminum sheet,

mechanically attached to front and back of housing with no visible

fasteners. For custom colors and/or custom Entablatures, consult your Kim

representative. See page 1 for dimensions.

Arch Cat. No. A1

Broken Arch Cat. No. A2

Stepped Arch Cat. No. A3

Stepped Broken Arch Cat. No. A4

Standard Entablature Cat. No. A5

Follows fixture body profile

Peak Cat. No. P6

Broken Peak Cat. No. P7

Stepped Peak Cat. No. P8

Stepped Broken Peak Cat. No. P9

Stepped Cat. No. P10

Optional Entablatures (Entabs)

| 4 |

ET LED

Entablature® Large PicoPrism® LED

kl_etpled_spec.pdf

Kim Lighting reserves the right to change specications without notice.

P 626.968.5666 | F 626.369.2695 | www.kimlighting.com |

Rev. May. 16, 2017

Housing:

■ Extruded low copper aluminum main body.

■ Die-cast low copper aluminum electrical

gear compartment.

■ Stainless steel hardware.

■ Die cast wall separates the optical

and electrical compartment acting

as thermal barrier.

■ Electrical gear compartment doors are

fastened with two hinges and a latch made

of stainless steel.

■ Silicone gaskets seal the compartments at the

barrier surface.

Optical Module:

■ PicoPrism® refractors (enclosed LED PCBs for

IP66 rating) aimed toward the task and spreads

horizontally to produce great uniformity.

■ Type I, II, III, IV, V, L (left), and R (right)

standard distributions. Custom available.

■ 3000K, 4000K, 5000K standard CCT.

Amber and custom available.

■ IP66 certied.

■ Die-cast, low copper aluminum heat sink

modules provide thermal transfer at

PCB level.

■ Anodized aluminum carrier plate and heat sink

modules.

Lens Frame:

■ One-piece low copper aluminum alloy die-cast

is secured to housing with two toolless latches.

Neighbor Friendly Optic

■ Optional integrated Neighbor Friendly Optic

on each LED module to completely control

unwanted backlight. Most effective with Type

III and IV distibutions.

Electrical Characteristics:

■ Pre-assembled, aluminum gear tray.

■ 120V through 480V @ 50/60Hz.

■ Class 2, 350mA or 700mA

■ Power Factor = >.90

■ National Electrical Code, ANSI/NFPA 70.

■ 10kV surge suppression.

■  Thermal shield thermal control.

■  -30c starting driver.

■ 0-10V dimming interface.

■ All electronic components are IP66 rated.

■ Electronic components are UL and/or CSA

recognized.

■ Standard programmable driver for variable

drive current settings from 350mA to 700mA.

Dimming:

■ 10% to 100% dimming using standard 0-10V

interface driver.

■ To activate the dimming system, a wiring

harness is supplied and attached to the DIM

Port (DIM IN) on the thermal shield protection

system. This port allows the 0-10V Interface to

bypass the thermal shield and control the driver.

■ The thermal shield works in conjunction with

the control system to assure that overheating

will not harm the LEDs.

■ The wiring harness is connected with the use

of the Purple lead as the positive (+) and the

Grey lead as the negative (-) to an available

control signal (by others).

Support Arm:

■ Speed Mount and a reinforcing plate are

provided with wire strain relief.

■ Speed Mount is square or circular cut for

specied pole size and shape.

■ Die-cast, low copper aluminum support arm

for direct pole mount.

■ Die-cast aluminum tool-less entry splice

access cover.

■ Terminal block is mounted in the arm cavity

and accepts #14 to #8 wire sizes.

■ Prewired to electrical module with

quick-disconnect plugs located inside

the electrical compartment.

■ Optional cast, low copper aluminum horizontal

slip-tter with adaptor plate to secure the

luminaire to 1-1/4” to 2” IPS pipe size arms.

■ Optional cast aluminum wall mount plate

assembly. Attaches to the wall over the

junction box. Luminaire attaches to the wall

plate with a square cut Speed Mount.

Finish:

■ Fade and abrasion resistant, electrostatically

applied, thermally cured, triglycidal

isocyanurate (TGIC) polyester powdercoat.

■ Standard colors include (BL) Black, (DB) Dark

Bronze, (GT) Graphite, (WH) White, (PS)

Platinum Silver, (LG) Light Gray, (TT) Titanium,

and (CC) Custom Color (Include RAL#).

Fusing:

SF for 120, 277 and 347 Line Volts

DF for 208, 240 and 480 Line Volts.

■ High temperature fuse holders factory installed

inside the xture housing. Fuse is included.

Certications and Listings:

■ UL 1598 Standard for wet locations for

Luminaires.

■ UL 8750 Standard for Safety for Light

Emitting Diode (LED) Equipment for use

in Lighting Products.

■ IP66 certied.

■ CSA C22.2#250.0 Luminaires.

■ ANSI C136.31-2010 3G Vibration tested

and compliant.

■ RoHS compliant.

■ IDA approved, 3000K and warmer CCTs only.

CAUTION:

■ Fixtures must be grounded in accordance

with national, state and/or local electrical

codes, Failure to do so may result in serious

personal injury.

WARRANTY:

■ For full warranty see http://www.

hubbelllighting.com/resources/warranty

SPECIFICATIONS

Fixture

Housing 30 mA Max

Gray Dimming Lead (-)

Standard Input Black (+)

White (-)

Green (GND)

Purple Dimming Lead (+)

| 5 |

ET LED

Entablature® Large PicoPrism® LED

kl_etpled_spec.pdf

Kim Lighting reserves the right to change specications without notice.

P 626.968.5666 | F 626.369.2695 | www.kimlighting.com |

Rev. May. 16, 2017

Kim Lighting reserves the right to change specications without notice.

1Pole Diameter, 2Voltage, 3Color

Gray Wire

0-10V Dimming

Purple Wire

0-10V Dimming

Orange Wire

10V Customer

Defined

Red Wire

Line Voltage

Brown Wire

10V Customer

Defined

Black Wire

Line Voltage

White Wire

Neutral

CONTROLS

Photocell Receptacle

A25-7

Fully gasketed and wired 7-pin receptacle

option. Easy access location above the electrical

compartment. 7-pin construction allows for a

user-dened interface and provides a controlled

denition of operational performance. ANSI

twist-lock control module by-others.

Standard customer operation modes:

1. Traditional on/off photoelectric control.

2. 5-pin wireless photoelectric control

for added dimming feature.

3. 7-pin wireless photoelectric control for

dimming and additional I/O connections for

customer use.

Button Photocell

A30 for 120V, A31 for 208V, A32 for 240V,

A33 for 277V, A35 for 347V, A34 for 480V,

Photocell is factory installed inside the housing

with a fully gasketed sensor on the side wall. For

multiple xture mountings, one xture is supplied

with a photocell to operate the others.

Wireless Control

Hubbell Building Automation’s wiSCAPE™

In-Fixture Module is a bi-directional wireless

RF device that allows an individual xture to be

managed, monitored and metered. The wiSCAPE

In-Fixture Module communicates wirelessly

over a robust 2.4GHz ISM (Industrial, Scientic

and Medical) certied meshed radio signal. The

wiSCAPE Fixture Module drastically simplies

control and automation of projects, especially in

retrot environments, and challenges the legacy

world of wired-systems. wiSCAPE wireless control

technology easily adapts to complex automation

situations for quick, simple and economical

commissioning. The On-Fixture Module is

compatible with A-25-7H option.

WIR-RMI-IO

120 - 347V 1000 Foot Range WiScape RF mesh

control system with off/on/dim, motion, photo,

GPS location, alert, monitoring and metering

capabilities.

Pole Mounted

Round Pole-Mounted Occupancy

Sensor up to 16'

SCL-R

Round Pole-Mounted Occupancy Sensor up to

16’ - an outdoor occupancy sensor with 0-10V

interface dimming control that mounts directly

to the pole. Wide 360° pattern. Module colors

are available in Black, Gray, and White. Module

is cut for round pole mounting. Pole diameter is

needed upon order. Poles to be drilled in the eld

will be provided with installation instructions.

Ordering Example: SCL-R41/2772/BL3

Square Pole-Mounted Occupancy

Sensor up to 16'

SCL-S

Square Pole-Mounted Occupancy Sensor up to

16’ - an outdoor occupancy sensor with 0-10V

interface dimming control that mounts directly

to the pole. Wide 360° pattern. Module colors

are available in Black, Gray, and White. Module

is cut for square pole mounting. Pole diameter is

needed upon order. Poles to be drilled in the eld

will be provided with installation instructions.

Ordering Example: SCL-L/2772/BL3

Round Pole-Mounted Occupancy

Sensor 16’ to 30’

SCH-R

Round Pole-Mounted Occupancy Sensor: 16' to

30’ - an outdoor occupancy sensor with 0-10V

interface dimming control that mounts directly

to the pole. Wide 360° pattern. Module colors

are available in Black, Gray, and White. Module

is cut for round pole mounting. Pole diameter is

needed upon order. Poles to be drilled in the eld

will be provided with installation instructions.

Ordering Example: SCH-R41/2772/BL3

Square Pole-Mounted Occupancy

Sensor 16’ to 30’

SCH-S

Square Pole-Mounted Occupancy Sensor: 16 to

30’ - an outdoor occupancy sensor with 0-10V

interface dimming control that mounts directly

to the pole. Wide 360° pattern. Module colors

are available in Black, Gray, and White. Module

is cut for round pole mounting. Pole diameter is

needed upon order. Poles to be drilled in the eld

will be provided with installation instructions.

Ordering Example: SCH-S/2772/BL3

SCP

The SCP is a photo-control with motion sensing

accessory thats mounts to the side of any new

or existing 3”-5” round or square straight pole.

The SCP enables any pole mounted luminaire in

excess of 75 watts, to meet California Title 24

requirements with integral 20KV/10KA surge

protection for added reliability and serviceability.

For more detail:

http://www.aal.net/products/sensor_control_

programmable

Gray Wire

0-10V Dimming

Purple Wire

0-10V Dimming

Orange Wire

10V Customer

Defined

Red Wire

Line Voltage

Brown Wire

10V Customer

Defined

Black Wire

Line Voltage

White Wire

Neutral

Kl Etpled Spec

Navigation menu

Versions of this User Manual:

Views

Navigation