Kl Sw1 Spec
2016-08-26
: Pdf Kl Sw1 Spec kl_sw1_spec spec products kim
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
SW1 Site Wallforms revision 8/2/16 • kl-sw1_spec.pdf Type: Job: Catalog number: SW1 / Fixture Electrical Module Approvals: 3000K and warmer CCTs only / / Finish Option Date: Page: 1 of 2 See page 2 Dimensions SW1 Model 50 watt HID Medium Base Lamps 42 watt Model Compact Fluorescent SW1 Specifications 50 watt HID SW1 Medium Base Lamps Maximum weight: 8 lb 60 watt Incandescent 42 watt Compact Fluorescent 8" 12J" (203.2 mm) (311.2 mm) 5J" (133.4 mm) Mounting Plate, Mounting Plate Gasket,and and Gasket Rope Caulk Caulk Rope by Kim Kim by 4" Octagonal J-box in wall (by others) HID drawing shown above 12J" (311.2 mm) 5J" (133.2 mm) 12J" (311.2 mm) Electrial Module: Factory mounted to removable harness within fixture head. Wire leads supplied with disconnect plugs. HID: High power factor with starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting. 26W, 32W, 42W Fluorescent: High power factor with starting temperature of 0°F. LED: A total of 9 LED emitters configured in a Underwriters Laboratories recognized. 18 and 36 LEDs 8" Lens: Clear flat B" thick tempered glass retained by two stainless steel brackets, and four stainless steel, hex socket cap screws, fully gasketed. rectangular array comprised together as a module. Two (2) modules for 18 LED version and four (4) modules for 36 LED version. Available in 3500K and 5100K. LED Driver: Rated for 18 or 36 LED. Universal voltage from 120 to 277V with a ±10% tolerance. -40ºF starting temperature. All drivers are SW1 LED Model (202.2 mm) Head: One-piece cast, low-copper (<0.6 Cu) aluminum alloy, F" wall thickness with external reveal. Attachment to wall is by two bolts concealed within the head. Reflector and Socket: Formed specular Alzak® reflector panel secured to a harness which holds a porcelain medium base 4KV socket (HID and Incandescent), GX24q - Universal Socket (42W Fluorescent), or two single ended twin tube sockets (13W Fluorescent). Entire assembly is removable in one piece for access to mounting screws and is factory wired with a disconnect plug. No reflector provided for LED. Mounting Plate, Mounting Plate Gasket, and and Gasket Rope Caulk Rope Caulk by Kim by Kim NOTE: The 120V driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). Mounting Plate: Zinc plated steel for attachment to standard 4" octagonal junction box. Gasket provided between mounting plate and fixture plus rope caulk between fixture and wall. Finish: Fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat. Standard colors are Black, Dark Bronze, Light Gray, Titanium, Platinum Silver, or White. Custom colors are available and subject to additional charges, minimum quantities and longer lead times. Consult representative. CAUTION: Fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. Listings and Ratings ETL1 to UL standards 1598 & 8750 IP66 Rated 1 2 IP66 Rated 25°C Ambient Full Cutoff 2 Suitable for wet locations Dark Sky Approved 3000K and warmer CCTs only KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICEE. © 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716 SW1 Site Wallforms revision 8/2/16 • kl-sw1_spec.pdf Type: Job: Page: 2 of 2 Standard Features Fixture Cat. No. SW1 Site Wallforms Electrical Module Cat. Nos. for Electrical Modules available: PMH = Pulse Start Metal Halide HPS = High Pressure Sodium PL = Compact Fluorescent INC = Incandescent LED = Light-emitting diode Lamp Lamp Line Watts Type Volts 50 PMH 277 For PMH, HPS and PL. See footnote 3 below for LED NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative. Finish Super TGIC powder coat paint over a titanated zirconium conversion coating on fixture and shaft. Pulse Start Metal Halide 50PMH120 50HPS120 50PMH277 Lamp ED-17, Coated Socket Medium Base ANSI Ballast M-98 High Pressure Sodium Compact Fluorescent 13PL1201 42PL2 13PL2771 60INC120 ED-17, (2) Twin (1) Triple T-10 Coated Tubes Tube Inside Frost Medium Base GX23-2 GX24q-4 — S-68 LED 18L3KUV3 36L3KUV3 18L5KUV3 36L5KUV3 Lamp LED Socket N/A LED N/A 1 Two lamps required per fixture. 2 42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz). NOTE: Coated lamps are recommended. For LED, 18L = 18 LED Emitters; 36L = 36 LED Emitters; 3K = 3500K color temperature; 5K = 5100K color temperature; UV = Universal Voltage from 120 to 277V with a ± 10% tolerance. 3 Color: Black Dark Bronze Cat. No.: BL DB Light Gray Titanium LG TT Platinum Silver White PS WH Custom Color4 CC Custom colors subject to additional charges, minimum quantities and extended lead times. Consult representative. Custom color description: 4 Optional Feature Textured Glass Lens Cat. No. TG No Option Incandescent Unique textured glass reduces LED glare and improves visual comfort. © 2016 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Instance ID : uuid:8865c4ee-fad2-a948-ae1f-42bb2fde14b8 Original Document ID : adobe:docid:indd:532a7bf7-d735-11e1-926a-f55c3f18995d Document ID : xmp.id:12d79a9d-9d67-43f7-8b03-ec7a577be41a Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:f3da4944-e766-4d6f-bfe8-c4478f597153 Derived From Document ID : xmp.did:efaa8146-bdc0-4266-b5ef-1eeb66e64066 Derived From Original Document ID: adobe:docid:indd:532a7bf7-d735-11e1-926a-f55c3f18995d Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:02 13:32:57-07:00 Create Date : 2016:08:02 13:32:57-07:00 Modify Date : 2016:08:02 13:35:13-07:00 Metadata Date : 2016:08:02 13:35:13-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Mode : UseThumbs Page Count : 2 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools