Kl Wds Spec
2018-08-06
: Pdf Kl Wds Spec kl_wds_spec spec products kim
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
Wall Director® Small JOB TYPE NOTES APPROVALS FEATURES • -5° to +10° tilt adjustment • High performance optics deliver up to 8,500 lumens • up or down mountable without modification WDS kl_wds_spec.pdf Certifications • • • • Diffused lens option Programmable occupancy sensor (dimming) NX and SiteSync wireless controls Up to 130 lumens per watt SPECIFICATIONS Downlight only, 3000K and warmer CCTs 13.0” 8.9” (330 mm) (226 mm) 4.3” (330 mm) 8.6” (218 mm) 13.0” (330 mm) Front Above / Below Side 4.3” (Depending on mounting) (330 mm) 6.2” Weight: 20 lbs (157 mm) Backside ORDERING CODE Fixture Mounting WDS Wall Director Small D Down U1 Up Source 24L 24 LEDs Wattage 30 40 60 75 30 Watts 40 Watts 60 Watts 75 Watts Light Engine 3K7 3K8 4K7 4K8 5K7 Distribution 1 2 3 4W 4F WG2 SP FTD2 3000K/70CRI 3000K/80CRI 4000K/70CRI 4000K/80CRI 5000K/70CRI WTD2 Control Options PC Button Photocell SCP-8F Programmable Occ. Sensor (<9' height) SCP-20F Programmable Occ. Sensor (9' - 20' height) SWP4 SiteSync Wireless Pre-Commission NXWE5 NX Wireless Enabled Options EM4 Internal Emergency Battery Backup SF Single Fuse & Fuse holder DF Double Fuse & Fuse holder Type I Type II Type III Type IV Wide Type IV Forward Wall Graze Spot/Column Forward Throw Diffuse Wide Throw Diffuse Voltage UNV 120-277V 3473 347V 4803 480V Fixture Finish BL DB GT LG PS TT WH CC Black Dark Bronze Graphite Light Gray Platinum Silver Titanium White Custom Color, consult representative Accessories SCPREMOTE SWUSB SWTAB SWBRG SCP configuration tool SiteSync Software on USB SiteSync Windows® Tablet SiteSync Software Bridge Node Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 1 ™ 2 3 4 Kim Lighting reserves the right to change specifications without notice. © 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018 5 Not available with EM option or with SCP & SWPM sensor options. WG, FTD, and WTD come with a diffused lens. 60 and 75 watt versions only Universal voltage only (120-277) 120-347V only | 1 | Wall Director® Small WDS kl_wds_spec.pdf LUMINAIRE PERFORMANCE LED # Nominal Lumen Package Nominal Wattage Lens Options Distribution 1 2 3 4F 4W SP WG FTD WTD 1 2 3 4F 4W SP WG FTD WTD 1 2 3 4F 4W SP WG FTD WTD 1 2 3 4F 4W SP WG FTD WTD Clear Lens 3,000 29 Diffuse Lens Clear Lens 4,500 42 Diffuse Lens 24L Clear Lens 6,000 59 Diffuse Lens Clear Lens 7,500 Lumen 74 Diffuse Lens 3433 3351 3340 3343 3172 3600 3372 2855 3151 4593 4484 4468 4472 4244 4817 4511 3819 4215 6333 6182 6161 6166 5851 6641 6219 5266 5812 7879 7692 7665 7672 7280 8263 7738 6552 7231 3000K 4000K 5000K BUG Rating BUG Rating BUG Rating B U G 1 1 1 1 1 3 2 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 1 4 3 1 1 1 1 1 1 1 4 3 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 1 1 0 1 1 1 1 0 1 1 1 1 1 2 2 2 0 1 1 1 1 1 2 2 2 0 1 1 1 Im/w Lumen 119 116 116 116 110 125 117 99 109 111 108 108 108 102 116 109 92 102 108 106 105 105 100 114 106 90 99 106 104 104 104 98 112 105 89 98 3519 3436 3424 3427 3252 3691 3456 2927 3230 4708 4596 4581 4585 4350 4938 4624 3915 4321 6492 6338 6316 6321 5998 6808 6376 5398 5958 8077 7885 7858 7865 7463 8471 7933 6717 7413 B U G 1 1 1 1 1 3 2 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 1 4 3 2 1 1 1 1 1 1 4 3 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 1 1 0 1 1 1 1 0 1 1 1 1 1 2 2 2 0 1 1 1 1 1 2 2 2 0 1 1 1 Electrical Characteristics System Current Watts 29 350mA 42 500mA 59 725mA 74 925mA Lumen 122 119 119 119 113 128 120 101 112 113 111 110 110 105 119 111 94 104 111 108 108 108 103 116 109 92 102 109 107 106 106 101 114 107 91 100 3560 3475 3463 3466 3289 3733 3496 2960 3267 4762 4649 4633 4637 4400 4994 4677 3960 4371 6566 6410 6388 6393 6067 6886 6449 5460 6026 8170 7975 7948 7955 7548 8567 8023 6793 7498 B U G 1 1 1 1 1 3 2 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 1 4 3 2 1 1 1 1 1 1 4 3 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 1 1 0 1 1 1 1 0 1 1 1 1 1 2 2 2 0 1 1 1 1 2 2 2 2 0 1 2 1 Im/w 123 120 120 120 114 129 121 103 113 115 112 112 112 106 120 113 95 105 112 110 109 109 104 118 110 93 103 110 108 107 107 102 116 108 92 101 Dimming Line Voltage VAC Im/w Hz 120-480 50/60 Amps AC 120 208 240 277 347 480 0.24 0.14 0.12 0.10 0.08 0.06 0.38 0.22 0.19 0.16 0.13 0.09 0.48 0.27 0.24 0.21 0.16 0.12 0.67 0.39 0.34 0.29 0.23 0.17 Min. Power Factor Max THD (%) Dimming Range >0.9 20 10% to 100% Source current out Absolute voltage Min Max Min Max 0mA 1mA 0V 10V TM-21 LIFETIME CALCULATION HOURS Projected Lumen Maintenance 0 100% Projected Lumen Maintenance (25°C / 77°F) 36,000 50,000 25,000 97% 95% 93% 100,000 Reported L70 86% > 60,000 hrs Kim Lighting reserves the right to change specifications without notice. © 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018 | 2 | Wall Director® Small WDS kl_wds_spec.pdf SPECIFICATIONS Housing • Optical housing is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral heat sink. The housing rotates against mounting arm housing to provide -5° to 10° of adjustment with degree markers cast into the housing. At 0 adjustment, lens is totally concealed from view above horizontal with fixture mounted in the downward position. • Mounting arm housing is one-piece die-cast, low copper (<0.6%) aluminum alloy with provisions for tilt mechanism. Mounting arm fastens to the mounting plate with keyhole slots freeing both hands for securing and wiring. One stainless steel socket-head screw on the tilt mechanism frees the optical housing to rotate for aiming. Tightening the screws locks the housing and lens frame together with sealing provided by a silicone gasket. For visual aiming, adjustment may be accomplished with the fixture on. 372J. Surge protection device shall be wired in series. • Drivers shall be U.L recognized. • Drivers shall not be compatible with current sourcing dimmers, consult factory for current list of known compatible dimming systems approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV. Dimming • 10% to 100% dimming by the use of standard 0-10V interface driver. • The thermal shield works in conjunction with the control system to assure that overheating will not harm the LEDs. • The wiring harness is connected with the use of the Purple lead as the positive (+) and the Grey lead as the negative (-) to an available control signal (by others). Standard Input Black (+) White (-) Green (GND) • Lens Frame is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral cooling fins to dissipate driver thermal. • Luminaire housing shall be free of any visible heat fins, hardware or fasteners. Gray Dimming Lead (-) Fixture Housing Purple Dimming Lead (+) 30 mA Max • Bracketry and hardware shall be stainless steel. Optical Array • LEDs shall be mounted to a metal printed circuit board assembly (MCPCB). • Optical lenses shall be clear injection molded PMMA acrylic. • Secondary lens is impact resistant 1/8” tempered glass with anti-reflective coating. Electronic Module • Drivers shall be in direct contact with the die-cast aluminum lens frame across the entire surface area of the widest face for maximum thermal transfer. • "Thermal Shield”, secondary side, thermistor provides protection for the sustainable life of LED module and electronic components. • Drivers shall have greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments • Luminaires shall have integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of Specifications • Luminaire shall be capable of operating at 100% brightness in a 40°C environment. Both driver and optical array shall have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C. • Luminaires not configured with a control system shall be provided with 0-10 purple and gray dimming leads. Controls • Optional universal voltage (120-277V) button photocontrol for dusk to dawn energy savings. Photocontrol is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others. • Occupancy Sensor shall be programmable and use passive infrared (PIR) sensing technology that reacts to changes in infrared energy (moving body heat) within the coverage area. Careful consideration must be given to obstructions that may block the sensor’s line of sight. • Factory default settings for SCP option shall be: - High mode: 10V - Low mode: 1V - Ramp-up rate: disabled - Fade-down rate: disabled Photocell: Off - Sensitivity: Full - Time Delay: Fade to low: 5 minutes - Time Delay: Fade to off: 1 hour • The SCP enables any wall mounted luminaire, in excess of 30 watts, to meet California Title 24 requirements with integral 10KA surge protection for added reliability and serviceability. For more detail: http://www.aal.net/products/ sensor_control_programmable • SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www. hubbelllighting.com/products/sitesync for more details. • Hubbell Control Solutions' NX Distributed IntelligenceTM lighting control platform utilizes a Distributed Network Architecture (DNA) that connects intelligent devices including luminaires, controllers, panels, occupancy sensors, photocells, wall switches and dimmers, creating a system with an unmatched level of reliability, scalability and simplicity Options • Integral battery backup provides emergency path of egress lighting for the required 90 minutes for 0°C ambient environments or -20°C with thermal jacket. • Fusing: SF for 120, 277 and 347 Line Volts DF for 208, 240 and 480 Line Volts High temperature fuse holders factory installed inside the fixture housing. Fuse is included. Mounting and Installation • JUNCTION BOX: Standard with steel, quick-mount junction box plate that mounts directly to 4” J-Box • Mounting plate is stainless steel and features a one-piece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. Servicing • Housing shall be able to hang freely in an open service position for inspection of primary wire connections. Once in service position, the housing shall be able to be removed for service by sliding the assembly to the left (for down mounting) or to the right (for up mounting) and disconnecting the wiring plugs. Kim Lighting reserves the right to change specifications without notice. © 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018 | 3 | Wall Director® Small WDS kl_wds_spec.pdf SPECIFICATIONS • Driver assembly shall be mounted to a prewired internal tray with quick disconnects for removal. Fusing SF for 120, 277, and 347 line volts DF for 208, 240, and 480 line volts high temperature fuse holders factory installed inside the fixture housing. Fuse is included. Finish: • Luminaire finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. • Luminaire finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance. • Standard colors include (BL) Black, (DB) Dark Bronze, (GT) Graphite, (LG) Light Gray, (PS) Platinum Silver, (TT) Titanium, (WH) White, and (CC) Custom Color (Include RAL#). Certifications and Listings • UL1598, UL 8750 and Canadian CSA Std. C22.2 no.250. • IDA approved, down light only, 3000K and warmer CCTs only. • 1.5G rated • IP65 Compliant CAUTION: • Fixtures must be grounded in accordance with national, state and/or local electrical codes, Failure to do so may result in serious personal injury. WARRANTY: • For full warranty see http://www.hubbelllighting. com/resources/warranty Kim Lighting reserves the right to change specifications without notice. © 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018 | 4 |
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Instance ID : uuid:ca19f344-f5c3-4a4a-8778-eb8c6f64d327 Original Document ID : adobe:docid:indd:188e435d-2e2e-11e2-8303-bc77975ad9c6 Document ID : xmp.id:49e22b42-63a3-4d9b-a0c2-db738b1682f4 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3bc4f060-57cd-46a0-8014-8ec6c63d78f1 Derived From Document ID : xmp.did:02d379a7-c6c5-4c5b-9ec9-5645f2781dee Derived From Original Document ID: adobe:docid:indd:188e435d-2e2e-11e2-8303-bc77975ad9c6 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:08:01 14:22:46-07:00 Create Date : 2018:08:01 14:22:46-07:00 Modify Date : 2018:08:01 14:23:52-07:00 Metadata Date : 2018:08:01 14:23:52-07:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Mode : UseThumbs Page Count : 4 Creator : Adobe InDesign CC 13.1 (Macintosh)EXIF Metadata provided by EXIF.tools