Kl Wds Spec

2018-08-06

: Pdf Kl Wds Spec kl_wds_spec spec products kim

Open the PDF directly: View PDF PDF.
Page Count: 4

JOB
NOTES
TYPE
APPROVALS
WDS
Wall Director® Small kl_wds_spec.pdf
| 1 |
Kim Lighting reserves the right to change specications without notice.
© 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018
SPECIFICATIONS
ORDERING CODE
FEATURES Certications
• -5° to +10° tilt adjustment
• High performance optics deliver up to
8,500 lumens
• up or down mountable without modication
• Diffused lens option
• Programmable occupancy sensor (dimming)
• NX and SiteSync wireless controls
• Up to 130 lumens per watt
Above / Below
(Depending on mounting)
Front
Side
Backside
13.0”
(330 mm)
8.6”
(218 mm)
13.0”
(330 mm)
4.3”
(330 mm)
8.9”
(226 mm)
4.3”
(330 mm)
6.2”
(157 mm)
Downlight only, 3000K
and warmer CCTs
EM
4
Internal Emergency Battery Backup
SF Single Fuse & Fuse holder
DF
Double Fuse & Fuse holder
PC Button Photocell
SCP-8F
Programmable Occ. Sensor (<9' height)
SCP-20F
Programmable Occ. Sensor (9' - 20' height)
SWP4
SiteSync Wireless Pre-Commission
NXWE5
NX Wireless Enabled
SCPREMOTE
SCP conguration tool
SWUSB
SiteSync Software on USB
SWTAB
SiteSync Windows® Tablet
SWBRG
SiteSync Software Bridge Node
Fixture Finish
BL Black
DB Dark Bronze
GT Graphite
LG Light Gray
PS Platinum Silver
TT Titanium
WH White
CC Custom Color,
consult
representative
Fixture
WDS Wall Director
Small
Mounting
DDown
U1Up
Source
24L 24 LEDs
Wattage
30 30 Watts
40
40 Watts
60
60 Watts
75
75 Watts
Light Engine
3K7 3000K/70CRI
3K8
3000K/80CRI
4K7
4000K/70CRI
4K8
4000K/80CRI
5K7
5000K/70CRI
Distribution
1Type I
2
Type II
3
Type III
4W
Type IV Wide
4F
Type IV Forward
WG2
Wall Graze
SP
Spot/Column
FTD2
Forward Throw
Diffuse
WTD2
Wide Throw
Diffuse
OptionsControl Options Accessories
1
2
3
4
5
Not available with EM option or with SCP & SWPM sensor options.
WG, FTD, and WTD come with a diffused lens.
60 and 75 watt versions only
Universal voltage only (120-277)
120-347V only
Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Weight: 20 lbs
Voltage
UNV 120-277V
3473
347V
4803
480V
™
| 2 |
Kim Lighting reserves the right to change specications without notice.
© 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018
WDS
Wall Director® Small kl_wds_spec.pdf
LED
#
Nominal
Lumen
Package
Nominal
Wattage
Lens
Options Distribution
3000K 4000K 5000K
Lumen BUG Rating Im/w Lumen BUG Rating Im/w Lumen BUG Rating Im/w
B U G B U G B U G
24L
3,000 29
Clear
Lens
13433 100 119 3519 100 122 3560 100 123
23351 101 116 3436 101 119 3475 101 120
33340 101 116 3424 101 119 3463 101 120
4F 3343 101 116 3427 101 119 3466 101 120
4W 3172 101 110 3252 101 113 3289 101 114
SP 3600 300 125 3691 300 128 3733 300 129
Diffuse
Lens
WG 3372 201 117 3456 201 120 3496 201 121
FTD 2855 101 99 2927 101 101 2960 101 103
WTD 3151 101 109 3230 101 112 3267 101 113
4,500 42
Clear
Lens
14593 100 111 4708 100 113 4762 100 115
24484 101 108 4596 101 111 4649 101 112
34468 101 108 4581 101 110 4633 101 112
4F 4472 101 108 4585 101 110 4637 101 112
4W 4244 101 102 4350 101 105 4400 101 106
SP 4817 300 116 4938 300 119 4994 300 120
Diffuse
Lens
WG 4511 201 109 4624 201 111 4677 2 0 1 113
FTD 3819 101 92 3915 101 94 3960 101 95
WTD 4215 101 102 4321 101 104 4371 101 105
6,000 59
Clear
Lens
16333 101 108 6492 101 111 6566 101 112
26182 101 106 6338 101 108 6410 101 110
36161 102 105 6316 102 108 6388 102 109
4F 6166 102 105 6321 102 108 6393 102 109
4W 5851 102 100 5998 102 103 6067 1 0 2 104
SP 6641 400 114 6808 400 116 6886 400 118
Diffuse
Lens
WG 6219 301 106 6376 301 109 6449 301 110
FTD 5266 101 90 5398 201 92 5460 201 93
WTD 5812 101 99 5958 101 102 6026 101 103
7,500 74
Clear
Lens
1 7879 1 0 1 106 8077 101 109 8170 101 110
27692 101 104 7885 101 107 7975 102 108
37665 102 104 7858 102 106 7948 1 0 2 107
4F 7672 102 104 7865 102 106 7955 102 107
4W 7280 102 98 7463 102 101 7548 102 102
SP 8263 400 112 8471 400 114 8567 400 116
Diffuse
Lens
WG 7738 301 105 7933 301 107 8023 301 108
FTD 6552 201 89 6717 201 91 6793 2 0 2 92
WTD 7231 201 98 7413 201 100 7498 201 101
LUMINAIRE PERFORMANCE
Electrical Characteristics Dimming
System
Watts Current Line Voltage Amps AC Min.
Power
Factor
Max THD
(%)
Dimming
Range
Source current out Absolute voltage
Min Max Min Max
VAC Hz 120 208 240 277 347 480
29 350mA
120-480 50/60
0.24 0.14 0.12 0.10 0.08 0.06
>0.9 20 10% to
100% 0mA 1mA 0V 10V
42 500mA 0.38 0.22 0.19 0.16 0.13 0.09
59 725mA 0.48 0.27 0.24 0.21 0.16 0.12
74 925mA 0.67 0.39 0.34 0.29 0.23 0.17
TM-21 LIFETIME CALCULATION
Projected Lumen Maintenance (25°C / 77°F)
HOURS 025,000
36,000 50,000 100,000 Reported L70
Projected Lumen
Maintenance 100% 97% 95% 93% 86% > 60,000 hrs
| 3 |
Kim Lighting reserves the right to change specications without notice.
© 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018
WDS
Wall Director® Small kl_wds_spec.pdf
SPECIFICATIONS
Fixture
Housing 30 mA Max
Gray Dimming Lead (-)
Standard Input Black (+)
White (-)
Green (GND)
Purple Dimming Lead (+)
Housing
• Optical housing is a one-piece, die-cast low
copper (<0.6%) aluminum alloy with integral
heat sink. The housing rotates against mounting
arm housing to provide -5° to 10° of adjustment
with degree markers cast into the housing. At 0
adjustment, lens is totally concealed from view
above horizontal with fixture mounted in the
downward position.
•
Mounting arm housing is one-piece die-cast,
low copper (<0.6%) aluminum alloy with
provisions for tilt mechanism. Mounting arm
fastens to the mounting plate with keyhole slots
freeing both hands for securing and wiring.
One stainless steel socket-head screw on the tilt
mechanism frees the optical housing to rotate
for aiming. Tightening the screws locks the
housing and lens frame together with sealing
provided by a silicone gasket. For visual aiming,
adjustment may be accomplished with the
xture on.
•
Lens Frame is a one-piece, die-cast low copper
(<0.6%) aluminum alloy with integral cooling
ns to dissipate driver thermal.
•
Luminaire housing shall be free of any visible
heat ns, hardware or fasteners.
• Bracketry and hardware shall be stainless steel.
Optical Array
• LEDs shall be mounted to a metal printed circuit
board assembly (MCPCB).
• Optical lenses shall be clear injection molded
PMMA acrylic.
• Secondary lens is impact resistant 1/8”
tempered glass with anti-reective coating.
Electronic Module
• Drivers shall be in direct contact with the
die-cast aluminum lens frame across the entire
surface area of the widest face for maximum
thermal transfer.
• "Thermal Shield”, secondary side, thermistor
provides protection for the sustainable life of
LED module and electronic components.
• Drivers shall have greater than a 0.9 power fac-
tor, less than 20% harmonic distortion, and be
suitable for operation in -40°C to 40°C ambient
environments
• Luminaires shall have integral surge protection
that shall be U.L. recognized and have a surge
current rating of 10,000 Amps using the industry
standard 8/20uSec wave and surge rating of
372J. Surge protection device shall be wired
in series.
• Drivers shall be U.L recognized.
• Drivers shall not be compatible with current
sourcing dimmers, consult factory for current
list of known compatible dimming systems
approved dimmers include Lutron Diva AVTV,
Lutron Nova NFTV and NTFTV.
Dimming
• 10% to 100% dimming by the use of standard
0-10V interface driver.
• The thermal shield works in conjunction with
the control system to assure that overheating
will not harm the LEDs.
• The wiring harness is connected with the use of
the Purple lead as the positive (+) and the Grey
lead as the negative (-) to an available control
signal (by others).
Specications
• Luminaire shall be capable of operating at
100% brightness in a 40°C environment. Both
driver and optical array shall have integral thermal
protection that will dim the luminaire upon
detection of temperatures in excess of 85°C.
• Luminaires not congured with a control system
shall be provided with 0-10 purple and gray
dimming leads.
Controls
• Optional universal voltage (120-277V) button
photocontrol for dusk to dawn energy savings.
Photocontrol is factory installed inside the
housing with a fully gasketed sensor on the
side wall. For multiple xture mountings, one
xture is supplied with a photocell to operate
the others.
• Occupancy Sensor shall be programmable and
use passive infrared (PIR) sensing technology
that reacts to changes in infrared energy (moving
body heat) within the coverage area. Careful
consideration must be given to obstructions
that may block the sensor’s line of sight.
• Factory default settings for SCP option shall be:
- High mode: 10V - Low mode: 1V - Ramp-up
rate: disabled - Fade-down rate: disabled -
Photocell: Off - Sensitivity: Full - Time Delay:
Fade to low: 5 minutes - Time Delay: Fade to
off: 1 hour
• The SCP enables any wall mounted luminaire,
in excess of 30 watts, to meet California Title
24 requirements with integral 10KA surge
protection for added reliability and serviceability.
For more detail: http://www.aal.net/products/
sensor_control_programmable
• SiteSync™ wireless control system for reduction
in energy and maintenance cost while optimizing
light quality 24/7. See ordering information or
visit www. hubbelllighting.com/products/sitesync
for more details.
• Hubbell Control Solutions' NX Distributed
IntelligenceTM lighting control platform utilizes
a Distributed Network Architecture (DNA)
that connects intelligent devices including
luminaires, controllers, panels, occupancy
sensors, photocells, wall switches and dimmers,
creating a system with an unmatched level of
reliability, scalability and simplicity
Options
• Integral battery backup provides emergency
path of egress lighting for the required 90
minutes for 0°C ambient environments or -20°C
with thermal jacket.
• Fusing:
SF for 120, 277 and 347 Line Volts
DF for 208, 240 and 480 Line Volts
High temperature fuse holders factory installed
inside the xture housing. Fuse is included.
Mounting and Installation
• JUNCTION BOX: Standard with steel,
quick-mount junction box plate that mounts
directly to 4” J-Box
• Mounting plate is stainless steel and features a
one-piece EPDM gasket on back side of plate
to rmly seal xture to wall surface, forbidding
entry of moisture and particulates.
Servicing
• Housing shall be able to hang freely in an open
service position for inspection of primary wire
connections. Once in service position, the
housing shall be able to be removed for service
by sliding the assembly to the left (for down
mounting) or to the right (for up mounting) and
disconnecting the wiring plugs.
| 4 |
Kim Lighting reserves the right to change specications without notice.
© 2018 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Aug. 01, 2018
WDS
Wall Director® Small kl_wds_spec.pdf
SPECIFICATIONS
• Driver assembly shall be mounted to a prewired
internal tray with quick disconnects for removal.
Fusing SF for 120, 277, and 347 line volts DF for
208, 240, and 480 line volts high temperature
fuse holders factory installed inside the xture
housing. Fuse is included.
Finish:
•
Luminaire nish shall consist of a ve stage
pretreatment regimen with a polymer primer
sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder
coat nish.
•
Luminaire nish shall meet the AAMA 605.2
performance specication which includes
passing a 3000 hour salt spray test for
corrosion resistance.
•
Standard colors include (BL) Black, (DB) Dark
Bronze, (GT) Graphite, (LG) Light Gray, (PS)
Platinum Silver, (TT) Titanium, (WH) White, and
(CC) Custom Color (Include RAL#).
Certications and Listings
•
UL1598, UL 8750 and Canadian CSA Std.
C22.2 no.250.
•
IDA approved, down light only, 3000K and
warmer CCTs only.
•
1.5G rated
•
IP65 Compliant
CAUTION:
•
Fixtures must be grounded in accordance
with national, state and/or local electrical
codes, Failure to do so may result in serious
personal injury.
WARRANTY:
•
For full warranty see http://www.hubbelllighting.
com/resources/warranty

Navigation menu