Lnc4 Spec
2017-09-16
: Pdf Lnc4 Spec lnc4_spec spec products outdoor
Open the PDF directly: View PDF .
Page Count: 3
Download | |
Open PDF In Browser | View PDF |
LITEPAK SERIES Cat.# Type Job Approvals LNC4 SPECIFICATIONS 7-Pin PCR Receptacle PRODUCT IMAGE(S) Intended Use: Largest in the Litepak product family, the LNC4 is designed for perimeter illumination for safety, security and identity. Replaces up to 400w HID luminaires one-for-one replacement covering existing installation footprint. No uplight and lower glare lenses offer neighbor friendly lighting at typical mounting heights of 15-25’. Units have protective polyester powder coat finish for long lasting appearance. Ideal for schools, factories, hospitals, warehouses and retail applications. Energy efficient LEDs provide 70%+ energy savings with little to no maintenance when compared to traditional light sources. Battery backup option for meeting path of egress requirements. Construction: Die-cast aluminum housing protects components and provides an architectural appearance. Casting thermally conducts LED heat to optimize performance and long life. Powder paint finish provides durability in outdoor environments. Four 1/2” conduit entries (top, bottom, and sides) provided for surface conduit. Electrical: • 120-277, 347 and 480 voltage, 50/60Hz, 0-10V dimming drivers. Electronic driver. 10 kA surge protection (parallel); Automatically takes fixture off-line when device is consumed. Ambient oper ating temperature -40°C to 40°C. Lenses: • Zero uplight distributions using individual acrylic LED optics provide IES type II, III and IV distributions • CS - Frosted acrylic diffuser option for reduced glare • CSU - Frosted acrylic diffuser for inverted “up” mounting applications (lens required Lumen Maintenance: L96 at 25,000 hrs (Projected per IESNA TM-21-11), see table on page 2 for all values Conduit Entry Installation: Quick-mount adapter with gasket seal provides easy installation to wall or to recessed junction box (4” square junction box). Fixture attaches by two Allen-head hidden fasteners for tamper resistance. Designed for direct j-box mount or conduit feed on all four sides in single SKU. Options/Controls • Button photocontrol for dusk to dawn energy savings • 7-pin photo-receptacle available for twist lock photocell and controls by others • Occupancy sensor options available for complete on/off and dimming control • Integral Battery Backup provides emergency path of egress lighting for the required 90 minutes • SiteSync pre-commisioned wireless controls (with or without sensor) 17.2” (436mm) • In addition, the LNC4 can be specified with SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www. hubbelllighting.com/sitesync for more details. Occupancy Sensor A 17.2” (436mm) With Diffuser DIMENSIONS A B C 10.5” (266mm) 9.9” (251mm) 6.5” (165mm) D E Listings • DesignLights Consortium® (DLC) qualified. Please refer to the DLC website for specific 10.5” product qualifications at www.designlights.org (266mm) 9.9” • Listed to UL1598 and CSAC22.2#250.0-24 (251mm) for wet locations. IP65 Assembly. IDA Approved (3000K configurations) LED(s) CCT: Warranty: • 3000K, 4000K and 5000K CCT nominal with 70 CRI. 36 and 44 LED configurations available, see page 2 for electrical and photometric data Five year limited warranty (for more information visit: http:// www.hubbelllighting.com/resources/warranty/ Fixture Weight: 27 pounds B A B C 17.2” 436 mm 10.5” 266 mm C 9.9” 251 mm D SHIPPING INFORMATION Catalog Number CERTIFICATIONS/LISTINGS LNC4-36L LNC4-44L D G.W(kg)/ CTN 27.0 (12.2) E 6.5” 8.9” 165 mm 226 mm 6.5” (165mm) E Weight 27 lbs. 12.3 kg 8.9” (226mm) Carton Dimensions Length Inch (cm) Width Inch (cm) Height Inch (cm) Carton Qty. per Master Pack 19.7 (50) 13 (33) 13 (33) 1 *3000K and warmer CCTs only ORDERING INFORMATION – CONFIGURABLE (ORDERING EXAMPLE: LNC4-36L3K-105-3-U-BL-PCU-CS) LNC4 FAMILY LNC4 Large Litepak Wallpack 1 2 3 4 5 6 7 8 NUMBER OF LEDS 36L 36LED 44L 44LED CCT 3K 3000K 4K 4000K 5K 5000K DRIVE CURRENT 035 350mA 065 650mA 105 1150mA IES DISTRIBUTION 2 Type II 3 Type III 4 Type IV Must specify voltage (battery backup 120 or 277V only, SiteSync 120, 277 or 347V only) Factory install only. Not available with SCP or SWPM sensor/control options Must order minimum of one remote control to program dimming settings, 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, 120-277V only. PCU option not applicable, included in sensor. Must specify sensor height (8F = up to 8ft, 20F = up to 20ft) Accepts standard 3, 5, and 7-Pin ANSI controls (by others). Not available with PCU, SWP or SWPM control options 36L-650mA version only. Not available with SWP or SWPM control options. Must specify group and zone information at time or order. See www.hubbelllighting.com/products/sitesync for further details. Specify time delay; dimming level and mounting height VOLTAGE U 1 2 3 4 5 F FINISH 120V-277V 120V1 208V 1 240V1 277V1 480V 1 347V1 DB BL WH GR PS CC Bronze Black White Gray Platinum Custom Color CONTROL OPTIONS PCU Universal Button PC 7PR5 7-pin photocell SCP3,4 SWP1,7 SWPM1,4,7,8 receptacle Programmable occupancy sensor SiteSync pre-commisioned SiteSync precommisioned w/ occupancy sensor REPLACEMENT PART/ACCESSORIES, CATALOG NUMBER LNC4-CS SCP-REMOTE* SWUSB* SWTAB* SWBRG* DESCRIPTION Frosted acrylic diffuser reduces surface brightness and glare with a roughly 20% lumen reduction Remote control for SCP option. Order at least one per project to program and control fixtures SiteSync loaded on USB flash drive (Windows based only) SiteSync Windows Tablet SiteSync Wireless Bridge Node Must order minimum of one remote control to program dimming settings, 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, 120V or 277V only • ** When ordering with SiteSync, one of the following interface options must be chosen an ordered separately. Each option contains the SiteSync License, GUI and Bridge Node. + If needed, an additional Bridge Node can be ordered. OPTIONS F1 Fusing (must specify voltage per footnote) CS Frosted acrylic diffuser CSU2 Frosted acrylic diffuser required for inverted fixture installations (Factory install only see page 3) E1,6 Integral battery backup rated for 0°C. EH1,6 Integral battery backup with heater rated for -30°C. Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA LNC4-SPEC September 15, 2017 9:45 AM (2 ORDERING INFORMATION – STOCKED VERSIONS (ORDERING EXAMPLE: LNC4-44L-4K) Wattage Number of LEDs Lumens LPW LNC4-36L-4K Catalog Number 124.6 36 Voltage Dist. Type 10,754 86.3 LNC4-44L-4K 152.6 44 13,477 88.3 LNC4-44L-5K 152.1 44 13,342 87.7 5000°K LNC4-44L-4K-7PR 152.6 44 13,477 88.3 4000°K LNC4-44L-4K-SCP 152.6 44 13,477 88.3 120-277 4 CCT Weight lbs. (Kg) Number of Drivers LED Currentt 27.0 (12.2) 2 1050mA 4000°K Hubbell Control Solutions - Accessories (sold separately) Catalog Number Description HCS System NXOFM-1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120-480VAC NX Distributed Intelligence™ WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110-480VAC wiSCAPE™ Lighting Control For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. PERFORMANCE DATA 5K (5000K nominal, 70 CRI) # OF DRIVE SYSTEM LEDS CURRENT WATTS 4 N/A N/A 36 40.3 350mA 44 49.3 36 650mA 44 80 96 36 1150mA 44 140 170 DIST. TYPE E 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 LUMENS 671 4,529 4,718 4,441 5,536 5,766 5,427 7,627 7,590 7,611 9,094 9,472 8,916 11,911 11,853 11,886 14,202 14,793 13,924 LPW1 B 112 117 110 112 117 110 95.3 94.9 95.1 94.7 98.7 92.9 86.6 90.2 84.9 83.6 87.0 81.9 N/A 1 1 1 1 1 1 2 1 1 2 2 1 2 2 1 2 2 2 4K (4000K nominal, 70 CRI) U 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G LUMENS 1 1 2 2 2 2 2 2 3 2 2 3 2 2 3 3 3 3 657 4,593 4,631 4,502 5,613 5,656 5,503 7,440 7,404 7,424 9,221 9,298 9,040 11,619 11,563 11,595 14,400 14,521 14,118 LPW1 114 115 112 114 115 112 93.0 92.5 92.8 96.0 96.9 94.2 84.5 88.0 82.8 84.7 88.2 83.0 B N/A 1 1 1 1 1 1 2 1 1 2 1 1 2 2 1 3 2 2 U 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3K (3000K nominal, 70 CRI) G LUMENS 1 1 2 2 2 2 2 2 3 2 2 3 2 2 3 3 3 3 591 4,269 4,305 4,186 5,218 5,262 5,116 6,756 6,723 6,742 8,572 8,644 8,405 10,551 10,500 10,529 13,387 13,499 13,127 LPW1 B U G 106 107 104 106 107 104 84.4 84.0 84.3 89.3 90.0 87.6 76.7 79.9 75.2 78.7 82.0 77.2 N/A 1 1 1 1 1 1 2 1 1 2 1 1 2 2 1 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 2 1 1 2 2 2 3 2 2 3 2 2 3 2 3 3 Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application. ELECTRICAL DATA Configurable Versions # oF LEDS Drive Current (mA) 36 350mA 44 36 650mA 44 36 1150mA 44 Input Voltage 120 277 347 480 120 277 347 480 120 277 347 480 120 277 347 480 120 277 347 480 120 277 347 480 Current (Amps) 0.34 0.15 0.12 0.08 0.41 0.18 0.14 0.10 0.66 0.29 0.23 0.17 0.80 0.35 0.28 0.20 1.17 0.51 0.40 0.29 1.42 0.61 0.49 0.35 System Power 40 40 40 40 49 49 49 49 80 80 80 80 96 96 96 96 140 140 140 140 170 170 170 170 Stocked Versions # oF Drive Current LEDS (mA) 36 44 STD. (1050)mA Input Voltage 120 277 120 277 Current (Amps) 1.03 0.45 1.27 0.55 System Power 124 124 152 152 Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA LNC4-SPEC September 15, 2017 9:45 AM LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) PROJECTED LUMEN MAINTENANCE Ambient Temp. OPERATING HOURS TM-21-111 25,000 50,000 L96 60,000 100,000 0 AMBIENT TEMPERATURE 0˚ C 32˚ F 10˚ C 50˚ F 20˚ C 68˚ F 25˚ C 77˚ F 30˚ C 86˚ F 40˚ C 104˚ F L70 (hours) 25°C / 77°F 1.00 0.96 0.92 0.91 0.85 223,000 40°C / 104°F 1.00 0.94 0.89 0.87 0.80 159,000 1. Projected per IESNA TM-21-11 * (Nichia 219B, 700mA, 85°C Ts, 10,000hrs) Data references the extrapolated performance projections for the LNC-12LU-5K base model in a 40°C ambient, based on 10,000 hours of LED testing per IESNA LM-80-08. CSU – INVERTED MOUNTING OPTION (Requires Factory Installed lens option) 80' PHOTOMETRICS Mounting Height Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). SCP - Programmable Occupancy Sensor 7PR-7-PIN RECEPTACLE (Photocontrol and Wireless Controls by Others) Sensor offers greater control and energy savings with SCP programmable sensor with adjustable delay and dimming levels (Factory default is 10%) Inverted mounting capabilities for uplighting applications. Specially designed frosted acrylic diffuser option softens output, improves uniformity and protects LED lenses. LUMEN MULTIPLIER 1.02 1.01 1.00 1.00 1.00 0.99 Standard NEMA 7-Pin receptacle for twist lock photocell or wireless controls (by others). Visit: http://www.hubbelllighting.com/solutions/controls/ for control application information 20ft 60' 80' 80' 60' 60' 80' 60' .25fc .5fc 40' 40' .25fc .25fc .5fc 20' .5fc 20' 1fc 2fc 0' 60' 40' 20' 0' 20' 40' 60' 20' 60' 40' 20' 0' 20' 33’ 11’ 11’ 11’ Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. 22’ 33’ 44’ HUBBELL OUTDOOR LNC4-36L-5K-105-3-U Large LNC4 Litepak C-70-CRI 22’ .1fc .5fc 20' 60' 40' 20' 0' 20' 40' 60' 20' TYPE IV (Foward throw): LNC4-36L-5K-105-4-U Horizontal Footcandles Scale: 1 Inch = 20 Ft. Light Loss Factor = 1.00 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 11853 Mounting Height = 20.00 Ft Maximum Calculated Value = 4.39 Fc Arrangement: Single 11’ 2fc 1fc 60' 0' E & EH EMERGENCY BATTERY BACKUP Horizontal Footcandles Scale: 1 Inch = 20 Ft. 11’ Light Loss Factor = 1.00 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 11911 Mounting Height = 20.00 Ft Maximum Calculated Value = 5.95 Fc Arrangement: Single 22’ 40' TYPE III: LNC4-36L-5K-105-3 PHOTOMETRICS - BATTERY BACKUP 44’ 20' 0' TYPE II: LNC4-36L-5K-105-2 HUBBELL OUTDOOR LNC4-36L-5K-105-2-U Large LNC4 Litepak C-70-CRI 2fc 20' 1fc 40' 1fc 2fc 0' 20' 40' HUBBELL OUTDOOR LNC4-36L-5K-105-4-U Large LNC4 Litepak C-70-CRI Horizontal Footcandles Scale: 1 Inch = 20 Ft. Light Loss Factor = 1.00 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 11887 Mounting Height = 20.00 Ft Maximum Calculated Value = 7.48 Fc Arrangement: Single Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. 22’ Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. 33’ 33’ 11' Mounting Height Provides Life Safety Code average illuminance of 1.0 fc. Assumes open space with no obstructions. 24 High Power LEDs generate up to 7,600 lumens in Normal Mode and use 4 LEDs for up to 700 lumens in emergency mode. Diagrams for illustration purposes only, please consult factory for application layout. SWP & SWPM - SiteSync™ SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. Precommissioned SiteSync Ordering Information: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project locations Group information, and Operating schedules. For more detailed information please visit www.HubbellLighting.com/proudcts/sitesync or contact Hubbell Lighting tech support at (800) 345-4928. SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture selection of the lens. Examples: LNC4-36L4k-105-3-U-DB-SWP LNC4-36L4k-105-3-U-DB-SWPM-20F SiteSync only SiteSync with Motion Control Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2016 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA LNC4-SPEC September 15, 2017 9:45 AM