PSpice User Manual New

User Manual: Pdf

Open the PDF directly: View PDF PDF.
Page Count: 45

DownloadPSpice User Manual New
Open PDF In BrowserView PDF
BIRZEIT UNIVERSITY/ELECTRICAL ENGINEERING DEPARTMENT

PSpice User Manual
Student Version 9.1

PREPARED BY: Eng. AMANI ATIANI
9/23/2010

Table of Contents
Chapter1: Before You Begin ......................................................................................................................... 4
1.1 Welcome ............................................................................................................................................. 5
1.2 Before You Getting Started ................................................................................................................ 6
Chapter2: Getting Started ............................................................................................................................ 7
2.1 Overview............................................................................................................................................. 7
2.2 Starting a New design ........................................................................................................................ 8
Chapter3: Simple Example ........................................................................................................................ 12
Chapter4: Plotting Traces .......................................................................................................................... 19
4.1 Overview of DC Sweep ..................................................................................................................... 20
4.2 Overview of AC Sweep ..................................................................................................................... 25
4.3 Overview of Transient Analysis ....................................................................................................... 28
Chapter5: More Examples and Exercises.................................................................................................. 32
References: ............................................................................................................................................... 46

2

Chapter1

Before You Begin

3

1.1: WELCOME
In this manual we will explain how you can use PSpice Schematics. PSpice
Schematics is one of the Orcad family products which offers a total solution for
your core design tasks: schematic- and VHDL-based design entry; FPGA and
CPLD design synthesis; digital, analog, and mixed-signal simulation; and printed
circuit board layout. What's more, Orcad family products are a suite of applications
built around an engineer's design flow—not just a collection of independently
developed point tools.
PSpice Schematics is just one element in our total solution design flow.
PSpice Schematics is a schematic capture front-end program with a direct interface
to PSpice.
PSpice Schematics is fully integrated with PSpice, giving you the flexibility to
work through your circuit design in a consistent environment.
In one environment, you can do all of the following using PSpice Schematics:
design and draw circuits
simulate circuits using PSpice
analyze simulation results .

4

1.2:Before You Getting Started
Make sure that the PSpice Student version 9.1 package is already installed on
your computer.

5

Chapter2

Getting Started
2.1:Overview:
This chapter describes Schematics: what it is, what it can do, and how you can use
it.

Using Schematics:
Schematics is a schematic capture front-end program that provides a convenient
system for:
• Creating and managing circuit drawings.
• Setting up and running simulations.

How to Draw a Schematic:
The following example demonstrates the basic drawing features for drawing a
schematic. It shows you how to:
• Start the schematic editor and begin a new design.
• Find out which libraries are configured for Schematics.
• Place parts on a schematic.
• Connect the part using wires and buses.
• Label wires and buses.
• Change reference designators and part values.
• Move parts, wires and text.
• Use ports on a schematic.
• Place power and ground symbols on a schematic.
• Save your design.

6

2.2:Starting a New Design
In order to start building your design:
 Step1 (Fig2.2.1): Go to Satrt <
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 45
Language                        : en-US
Tagged PDF                      : Yes
Title                           : PSpice User Manual
Author                          : PREPARED BY: Eng. AMANI ATIANI
Subject                         : Student Version 9.1
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2011:02:14 22:58:42
Modify Date                     : 2011:02:14 22:58:42
Producer                        : Microsoft® Office Word 2007


EXIF Metadata provided by EXIF.tools

Navigation menu