Nexus 1500+ Power Quality Meter Brochure V.1.05 E154718 1500
User Manual: Pdf Nexus 1500+ Power Quality Meter Brochure V.1.05 E154718
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Nexus 1500+ ® Next Generation Power Meter for Critical Energy Circuits Advanced Metering and Communication www.electroind.com • Constant Calibration™ Architecture Provides Highly Stable Readings, as the Meter Self-calibrates Every 10 Seconds • Critical Metering Needs are Met by 0.06% Accuracy in Energy Metrology • Color Touchscreen Programmable Display Enhances the Meter's Functionality • 6 Available Communication Ports, Including Dual Ethernet Ports • Ethernet Ports Offer Secure, Configurable Port Services Control • Supported COM Protocols Include Modbus, DNP 3.0, IEC 61850, and GOOSE Messaging Superior Recording and Power Quality Analysis • Class A IEC 61000-4-30 Power Quality Measurement • Class A IEC 61000-4-15 Flicker Measurement • Class A IEC 61000-4-7 Harmonics Measurement • Supports Customized EN 50160 Power Quality Reporting • Offers up to 4 GB of Memory for Storage • Offers 50 MHz Transient Capture Speed • The Perfect Meter for Co-generation and Independent Power Providers • Supports Substation Automation, Grid Monitoring, and Distribution Substation Reliability Measurements Electro Industries/GaugeTech™ The Leader in Power Monitoring and Smart Grid Solutions™ Introduction The Nexus® 1500+ meter is designed to be a primary and testable revenue meter that additionally provides advanced power quality analysis functions. It records every aspect of electrical power, including power quality and transients, and gives you access to this information both in real time and through reports on the quality of the electrical circuit in compliance with the IEC 61000-4-30 Class A and EN 50160 international standards. In this way, the Nexus® 1500+ meter provides you with a comprehensive picture of your circuits’ power usage and reliability. The Nexus® 1500+ meter’s capabilities insure that essential data is captured and stored, so that critical information about important electrical circuits is not lost. Designed with superior processing power that lets it measure energy usage precisely, large amounts of memory for recording events, and advanced power quality reporting compliance, the Nexus® 1500+ meter is the clear choice for your applications where critical metering is an absolute necessity, be it for power utility, industrial, or other critical metering usage. Highly Accurate Energy Metrology The Nexus® 1500+ meter incorporates one of the most advanced metrologies available for measuring energy. Providing highly accurate measurements exceeding the ANSI C12.20 (0.2 Class) standard and the IEC 62053-22 (0.2S Class) standard, the 1500+ provides an Energy Class accuracy of 0.06%, with typical shipping accuracies of 0.02%. Additionally, the meter has a highly accurate front panel test pulse that lets you test on one pulse at low pulse weight, which you can use to quickly determine accuracy. The meter also features a new precision real time clock that offers accuracy of 3.5 ppm, or less than 10 seconds per month drift. Typical Accuracy over Current Range Typical 0.02% Accuracy over Full Range Note that typical accuracy is 0.02%; however, the meter specification should be consulted for accuracy details. 2 New Constant Calibration™ Architecture Increases the Stability of Measurement Accuracy The Nexus® 1500+ meter improves on existing Nexus® architecture by providing one of the best auto-calibration methods available. Earlier Nexus® models relied on AccuMeasure™ technology that auto-calibrated the meter every 12 hours or 5 degree temperature change. Constant Calibration™ architecture improves significantly on this, by providing considerably faster, ongoing auto-calibration. With Constant Calibration™ architecture, the meter utilizes a separate calibration channel to calibrate the incoming signal in real time every 10 seconds, thereby insuring that the meter experiences minimal drift in accuracy over time and temperature. With this auto-calibrating circuit, right out of the box the Nexus® 1500+ meter will stabilize its readings within 10 seconds. This means you no longer have to wait for the meter to stabilize in temperature to achieve optimal accuracy. With Constant Calibration™ architecture, the meter will hold its accuracy throughout its operation range. Once the meter is tested, it will maintain the precise accuracy even if the operating conditions are less than ideal. Typical Meter Accuracy Charts Drift over Temperature Meter Maintains Accuracy over Changing Temperature Advanced Revenue Meter for Primary Loads The Nexus® 1500+ unit is a primary revenue meter designed to be used for any important applications. In addition to highly accurate energy measurement, the meter features: • Full 4 quadrant metering • Energy load profiling: log virtually unlimited historical trending • Time of Use perpetual calendar that supports multiple tariffs • Transformer and Line Loss compensation: for both iron and copper and total substation losses • CT and PT compensation: correct for errors in current and voltage transformers • Coincidental readings: e.g., PF or VARs at time of Peak Demand, to identify number of capacitors needed, peak inefficiencies, etc. • Load aggregation/universal metering: pulse inputs can be used to aggregate or accumulate different loads; utility products such as gas and water can also be accumulated Test Mode and Energy Presets The Nexus® 1500+ meter offers a Test Mode for testing meter accuracy. Test Mode allows the meter to be tested for watt-hour and VAR-hour accuracy without affecting the stored readings. Using Test Mode, users can verify the meter’s readings over the lifespan of an installed meter without having to reset energy or disturb the load profiling and demand recording. The Energy Preset feature allows a user to program the energy accumulator values upon exiting Test Mode. This lets the user compensate for accumulations missed during testing time, or easily swap a new meter for a meter being replaced. System Events Logging The unit provides extensive usage information for detection of unauthorized access. The unit records: • Resets • Time changes • Programming changes • Power up/down • Password access changes • Change of Firmware Perpetual Time of Use for Complex Metering The Nexus® 1500+ meter uses a perpetual Time of Use (TOU) calendar that only needs to be set up once. The TOU implementation allows the user to set up multiple tariffs to meet any contractual obligations. It also allows the user to customize any energy parameter for TOU. The 16 available TOU registers can be configured not only for TOU built-in energy readings, but also for any stored data from pulses or RTU Master readings that might need TOU functionality. 3 Class A Power Quality Recorder EIG’s Nexus® 1500+ meter is one of the industry’s premier fault and voltage disturbance recorders. This instrument captures and stores a comprehensive picture of the history of voltage reliability and power quality events, for detailed and extensive forensic engineering analysis. The Nexus® 1500+ meter offers a multitude of power quality functionality that helps the user identify power quality problems, including harmonics, sags, swells and transients. Power quality features include: IEC 61000-4-30 Class A Power Quality Meter: IEC 61000-4-7 Class A Harmonics and Interharmonics Analysis: • View harmonic magnitudes to the 511th order for each voltage and current channel • Harmonic magnitudes and phase angles in real time are resolved to the 127th order • Obtain %THD, TDD, and K-Factor • Conduct power quality analysis at the high end of the harmonic magnitude spectrum The Nexus® 1500+ meter is a comprehensive Class A power quality recorder. Designed specifically to meet the rigorous IEC 61000-4-30 Class A standard, it measures and analyzes power quality precisely. All reporting is available via the EN 50160 reporting format, which provides a weekly report of power quality indices system-wide. Additionally, the report can be fully customized to meet the required application or jurisdictional needs. • IEC 61000-4-30 Reporting: Class A Reporting – supports the most stringent international power quality standards; the Nexus® 1500+ meter offers full reporting of power quality conditions using the IEC 61000-4-30 Class A methodology • Automatic generation of EN 50160 reports and EN 50160 report customization to support different jurisdictional requirements Phasor Analysis: The monitor reads a phase angle analysis between the voltage and current channels, allowing you to analyze efficiency and system integrity. High-speed Voltage Reliability Measurements: Easy-to-Understand Reports Displaying PQ Compliance The Nexus® 1500+ meter provides industry leading voltage measurement. IEC 61000-4-15 Class A Flicker Meter: 4 • Flicker compliant with the IEC 61000-4-15 Class A standard • Operates on both 220 volt/50 Hz and 120 volt/60 Hz throughout standard test points • Real time single cycle RMS measurements • Customizable high-speed readings – can be set from 2 to 20 cycles RMS Set Limit Control: The Nexus® 1500+ power monitor provides the user with programmable setpoints. This feature allows a user to configure the meter to be used as a control device for many applications, such as: • Capacitor control • Load shedding • Automatic transfer schemes • Transformer monitoring & control • Redundant protection (not designed for primary over-current protection) • Many other control functions Alarm Notification: • The Nexus® 1500+ meter lets you set multiple programmable limits for any measured value, as well as those set up in a Boolean logic tree, and limits set up in the IEC 61850 protocol implementation. Users can be notified of alarm conditions via email. 16 Bit Waveform and Fault Recorder: • Record up to 1024 samples per cycle; capture a transient at over 800,000 samples per cycle or at 50 MHz sampling speed • Voltage and current recording with pre and post-event analysis • Fault recording offers 8 times full scale capture capability • 16 bit A/D converter provides precise waveform resolution • Both hardware and software triggers are available High-speed Status Input Triggers: • Waveforms are recorded at time of status change • Input change and waveform recording are time-stamped to a 100 micro second resolution • Inputs and waveforms can be displayed together to time breakers and relays Subcycle 50 MHz Transient Recorder (V3 Option): Transients often cause intermittent, expensive periods of downtime. The subcycle transient recorder allows you to: • Record subcycle transients at 50 MHz resolution • Monitor switching noise from capacitors, static transfer switches, SCRs, and other devices that negatively impact power quality This feature is essential for critical applications such as hospitals, wafer-fabs plants, data centers and other highly power quality sensitive applications. Independent ITIC/CBEMA Log Plotting: • Quickly view total surges, sags, and average duration in the independent ITIC/CBEMA log • SEMI F47 graphing for power quality compliance in semiconductor industry Compatible Waveform Formats Using Communicator EXT™ software, the meter will provide all waveform data via COMTRADE and PQDIF compatible formats. This allows the waveform PQ and fault records to be read by most third-party waveform analysis software programs. • COMTRADE (common format for transient data exchange) is defined by IEEE Std C37.111 • PQDIF (power quality data interchange format) is defined by IEEE Std 1159.3-2003 Record and Analyze Waveform Fault and Transient Data 5 Multiport Communication The Nexus® 1500+ meter offers up to 6 simultaneous communication ports and multiple protocols to meet almost every need. Industry-Leading DNP 3.0 Level 2 Plus - Complies with DNP Level 1 and Level 2 Certification Requirements: Hardware Features: Up to 136 measurements (64 Binary Inputs, 8 Binary Counters, 64 Analog Inputs) can be mapped to DNP static points • 2 optional RS485 ports speaking Modbus and/or DNP 3.0 • USB front panel port • Up to 16 relays and 8 resets can be controlled through DNP • ANSI optical front panel port • Report-by-exception processing (DNP Events) deadbands with unsolicited response for serial communication • 2 separately addressable Ethernet ports • • Optional Fiber or RJ45 media on one Ethernet port 250 available events, in four event types (Binary Input Change, Frozen Counter, Counter Change, and Analog Change) Ethernet Communication Port Capabilities: 6 • 8 Built-in Digital High-speed Status Inputs: • 2 Ethernet ports provide multiple simultaneous communication • Inputs automatically sense whether the circuit is externally wetted • Each port has separate MAC address and IP address • If externally wetted, input up to 150 VDC is accepted • Supports Modbus TCP/IP, DNP 3.0 and IEC 61850 • • GOOSE messaging protocol supported for IEC 61850 If internally wetted, the meter supplies the necessary voltage for the contol application • Up to 32 Modbus TCP/IP sockets per Ethernet port • Highly secure port control to disable unneeded services and ports • Email Function - SMTP email to client on alarm • Precise Time Synchcronization - SNTP Time Sync protocol • File Transfer Protocol - High-speed file data transfer VAUX Input: • Neutral to ground or aux voltage readings • Synchronizing schemes, for example, obtaining the frequency, magnitude, and phase angle on both sides of a switch or between generator and bus voltage Highly Capable Communication Options Substation Automation V-Switch™ Key Technology V-Switch™ key levels V2 and above offer an embedded IEC 61850 Protocol Server for seamless integration with substation automation applications. Features of the Nexus® 1500+ meter’s IEC 61850 implementation include: The Nexus® 1500+ meter is equipped with V-Switch™ key upgrade technology that lets you upgrade meter functionality even after installation. This means you can purchase what you need now and then upgrade whenever you need the additional features. Following are the available V-Switch™ keys: • • The IEC 61850 Protocol Server allows up to 6 simultaneous MMS clients. Feature V1 V2 V3 Either Ethernet port can be configured for IEC 61850 (only one port at a time can run IEC 61850). Basic Measurements * * * Memory 512 MB 1 GB 4 GB • GOOSE publisher/subscriber functionality is supported. Sampling Speed 512 1024 Up to 800,000 • Buffered and unbuffered reports are supported for the following triggers: general meter interrogation, for example, the report is generated in response to a query; meter integrity, for example, the report is generated according to a programmed interval; and data change, for example, the report is generated due to a change in the contents of a dataset. EN61000-4-30 Class A • File transfer is supported. • Embedded Web Protocol Server support is available for IEC 61850 CID file uploading, IEC 61850 Protocol Server status and for displaying incoming and outgoing GOOSE messages. • • Multiple Logical Nodes, which map flicker, harmonics, digital inputs/outputs, limit state, voltage, current, energy and other data, are supported. 50 MHz Transients * * * * IEC 61850 Server * * IEC 61850 GOOSE * * Unique GOOSE Cross Trigger: • Fault-based cross trigger of waveform based on GOOSE message • Provides system-wide distribution fault analysis on an event • Timing better than 200 microseconds is typical • Many different circuits can be viewed after an event occured Waveform capture can be triggered by status input data inside GOOSE messages. The user can program up to 16 status inputs that will trigger a waveform capture when the information is received via a GOOSE message. The status inputs include digital inputs, limit states, and any other status input supported by the meter. Intelligent Substation IEC 61850 Design Cross Trigger Fault Readings for Simultaneous Station-wide Fault Analysis 7 The Meter of Choice for Critical Energy Measurement Designed for use between two utility tie points or for critical SCADA data 8 Expandable Inputs and Outputs to Extend Measurements Internal I/O • 8AI2: 8 Analog Inputs, 4-20 mA • 8AI3: 8 Analog Inputs, 0±5 VDC • 8AI4: 8 Analog Inputs, 0±20 VDC 485P: Dual RS485/Pulse Output Card • Wiring: Common Mode • 4 KYZ pulses - Solid State • Accuracy: 0.25% of Full Scale • Pulse width: 5 ms • Scaling: Programmable • Two RS485 ports • Ordering: Up to 4 Analog Input modules Pulse Outputs: Relay Outputs: 6RO1: 6 Relay Output Card • 5 A, 250 VAC/30 VDC • Form C (Latching) Digital Dry Contact Relay Outputs: • 4RO1: 4 Relay Outputs, 5 A, 250 VAC/30 VDC, Form-C Latching • Ordering: 1 module in addition to internal modules Digital Solid State Pulse Outputs: Digital Input Status: 16DI1: 16 Status Inputs Card • Used for alarm detect or pulse accumulation • Up to 150 VDC wetted or non-wetted (24 VDC internally provided) Note: The Nexus® 1500+ meter provides one I/O slot for the 485P (Slot 1), and two I/O slots for the 6RO1 and 16DI1 (Slots 3 and 4). • 4PO1: 4 Solid State Pulse Outputs, Form A or C KYZ pulses • Maximum Pulse Speed: 20 pulses per second • Ordering: Up to 4 Digital Solid State Output modules I/O Module Accessories (Required): • PSIO: Power supply required when using an external I/O module. The Nexus® 1500+ meter does not have internal power for external I/O modules. • MBIO: Mounting bracket for external I/O modules. Must be ordered with external I/O module. External I/O Analog Outputs: • 1mAON4/1mAON8: 4 or 8 Analog Outputs, 0-1 mA, self-powered, scalable, bidirectional • 20mAON4/20mAON8: 4 or 8 Analog Outputs, 4-20 mA, self-powered, scalable • Wiring: Common Mode • Accuracy: 0.1% of Full Scale • Calibration: Self-calibrating • Scaling: Programmable • Ordering: Up to 4 Analog Output modules Analog Inputs: • 8AI1: 8 Analog Inputs, 0±1 mA Secure Communication Expandable External I/O Modules The Nexus® 1500+ meter offers 9 levels of password security to protect the meter from unauthorized use. Each level can be configured to enable specific capabilities, so that a Utility can control access to functions according to the type of user. For example, one user level is able to create and change TOU calendars, while a different user level is able to read TOU data, but not change anything. 9 Vibrant LCD Touch Screen Display The Nexus® 1500+ meter features an LCD color display with touch screen capability. The display uses bright TFT glass with a high temperature and long life LED backlight. LED is superior to CCFL solutions due to better temperature and half-life specifications. Screen displays include: • Real-time viewing (voltage, current, power, demand) • Harmonic spectrum analysis and waveforms • Accumulated energy and time of use readings • Real time trending • Log status • Flicker readings • Configuration settings • Alarms • Multi-language Support • Phasor Analysis Vivid Color Display Wiring Diagrams A B C N * A B C N * CT Shorting Block Va Vb Earth Ground CTs N/U CT Shorting Block Vn Vc Vn Vaux Vaux PTs N/U Vb Earth Ground CTs Vc Va Vn Vn Vc Vc Vb Vb Va Va Earth Ground A B C N 4-Wire Wye, 3 Element with 4 CTs and 3 PTs *Note: Optional CT for Current Measurement Only A B C N A B C CT Shorting Block CT Shorting Block Va Earth Ground CTs 4-Wire Wye, 3 Element with 4 CTs and no PTs *Note: Optional CT for Current Measurement Only A B C N N/U Vb Vc Vn Va Earth Ground CTs Vc Vn Vaux PTs N/U Vb Vaux Vc Vc Vn Vb Va Va Earth Ground 10 A B C N 4-Wire Wye, 2.5 Element, 3 CTs and 2 PTs A B C 3-Wire, 2 Element Delta Direct with 2 CTs Dimensional Drawings 10.74” [27.28cm] 1.87” [4.75cm] 7.6” [19.30cm] 5.04” [12.80cm] 5.73” [14.55cm] 4.44” [11.28cm] 5.94” [15.09cm] 4.44” [11.28cm] 6.96” [17.68cm] 6.74” [17.12cm] Front Side Back Specifications Voltage Input Range: Accuracy Rating: • (5-347)VAC, Line to Neutral • Energy measurement accuracy at 0.06% • ANSI C12.1 (Code for Electricity Metering) • (10-600)VAC, Line to Line • Full accuracy specifications available in Nexus® 1500+ meter User Manual • ANSI C62.41 (Burst) • ANSI/IEEE C37.90.1 – Surge Withstand • FCC Part 15, Subpart B, Class A • IEC 61000-4-2 – ESD • IEC 61000-4-3 – Radiated Immunity • IEC 61000-4-4 – Fast Transient • IEC 61000-4-5 – Surge Immunity • IEC 61000-4-6 - Conducted Immunity • IEC 61000-4-7 – Harmonics • IEC 61000-4-15 – Flicker Meter • IEC 61000-4-30 – Class A • IEC 62052-11 - General Requirements IEC/CISPR 14-1 - Continuous EM Disturbance Voltage Input Withstand Capability: • Voltage Inputs isolated to 2500 VAC • Current Input Range: Time clock: 3.5 ppm for -40 to +85 °C - less than 10 seconds drift per month on crystal sync; 2.0 ppm Typical from 0 - +40 °C - less than 6 seconds per month drift • Programmable to any CT ratio • Class 2: Nominal 1 A, with 2 times over range • Class 2: fault current recording to +/- 16 A peak • 1 Second - Revenue accurate readings • 1 Cycle - Faster updated readings • Class 20: Nominal 5 A, with 4 times over range • • Class 20: fault current recording to +/- 80 A peak Customizable high-speed readings - from 2 to 20 cycles RMS Control Power Requirements: Current Input Withstand Capability (at 23°C): Update Time: • D2 Option: (100–240)VAC @50/60 Hz or (100-240)VDC (0.2S Class) Accuracy • 100 A for 10 seconds • 115AC Option: (100-240)VAC @50/60 Hz • • 300 A for 3 seconds • D Option: (18-60)VDC (24-48 VDC Systems) • CE Marked • 500 A for 1 second • Burden: 25 VA Max • UL and cUL Listed Burden: Frequency Range: External I/O Modules • • • 1mAON4: 4 Analog Outputs, 0±1 mA Communication: • 1mAON8: 8 Analog Outputs, 0±1 mA • Programmable parity and stop bits • 20mAON4: 4 Analog Outputs, 4-20 mA • Communication protocols: Modbus TCP/IP, ASCII/RTU; DNP 3.0; IEC 61850 (V2 and above) • 20mAON8: 8 Analog Outputs, 4-20 mA Temperature Rating: • 8AI1: 8 Analog Inputs, 0±1 mA • ANSI optical port • Operating temperature: (-20 to +70)°C • 8AI2: 8 Analog Inputs, 4-20 mA • USB 1.1/2.0 Virtual COM port • Storage temperature: (-30 to +80)°C • 8AI3: 8 Analog Inputs, 0±5 VDC • RJ45 Ethernet port 10/100BaseT • Humidity: Up to 95% RH non-condensing • 8AI4: 8 Analog Inputs, 0±10 VDC • Optional 2nd Ethernet port - RJ45 or Fiber Optic Sensing Method: • 4RO1: 4 Relay Outputs • 2 RS485 ports (optional) • Up to 1024 samples per cycle (programmable) • 4PO1: 4 Solid State Pulse Outputs Shipping: • 16 Bit A/D resolution – multiple converters • • Total shipping weight: approx. 6.5 lbs (2.9 kgs) PSIO: Power Supply for I/O modules (must be ordered with external I/O module) • Constant Calibration™ technology • • • True RMS Shipping container dimensions: 16" x 15.5" x 11.5" (40.64 am x 39.37 cm x 29.21 cm) MBIO: I/O mounting bracket (must be ordered with external I/O module) • Transient at 50 million samples per second • Voltage Inputs: 0.072 VA/phase max at 600 volts, 0.003 VA/phase max at 120 volts Current Inputs: 0.008 VA per phase max at 20 A Isolation: • All inputs to outputs are isolated to 2500 VAC 45 Hz–69.9 Hz Compliance: • ANSI C12.20 (0.2 Class) and IEC 62053-22 Note: Please see product User Manual for comprehensive specifications. 11 To order a Nexus® 1500+ meter: • • Fill out the options you want in the order chart shown below: list accessories separately. • EIG can also provide current and potential transformers. • Email or fax order information and quantity to the email address or fax number listed below, or call the phone number listed below to place your order. Specify Communicator EXT™ 4.0 software. Ordering Information Nexus® Base Meter - Option Numbers: Example: Control Power Nexus 1500+ Nexus® 1500+ Meter - Frequency Range - D2 - Current Class - 60 - Virtual Switch - 20 - Communication Expansion/Slot 1 - V2 I/O Slot 2 - - 485P I/O Slot 3 - - NTRJ I/O Slot 4 - - 6RO1 - 6RO1 115AC (100-240)VAC @50/60 Hz 60 60 Hz 20 20 A V1 Standard Nexus® 1500+ Meter 512 MB memory / 512 s/c X No Option X No Option X No Option X No Option D2 Universal (100-240)VAC @50/60 Hz or (100-240)VDC 50 50 Hz 2 2A V2 V1 + 1 GB memory / 1024 s/c IEC 61850 485P 2 RS485 and 4 Pulse Outputs NTRJ Second RJ45 Network Card 6RO1 6 Relay Outputs 6RO1 6 Relay Outputs NTFO Second Fiber Network Card (ST terminated) 16DI1 16 Status Inputs 16DI1 16 Status Inputs D (18-60)VDC V3 V2 + 4 GB memory / 50 MHz Transient Recording Accessory Options Software COMEXT4P1Y Communicator EXT™ 4.0 Software for Windows Single-Computer License (One Site) I/O Modules 1mAON4 1mAON8 20mAON4 20mAON8 8AI1 8AI2 8AI3 8AI4 4RO1 4PO1 4 Analog Outputs, 0±1 mA 8 Analog Outputs, 0±1 mA 4 Analog Outputs, 4-20 mA 8 Analog Outputs, 4-20 mA 8 Analog Inputs, 0±1 mA 8 Analog Inputs, 4-20 mA 8 Analog Inputs, 0±5 VDC 8 Analog Inputs, 0±10 VDC 4 Relay Outputs 4 Solid State Pulse Outputs *PSIO Power Supply for External I/O Modules *MBIO I/O Mounting Bracket * Must be ordered with an external I/O module. About Electro Industries: Electro Industries/GaugeTech is one of the oldest and largest manufacturers of microprocessor-based digital power meters in the United States. EIG's success is attributable to our willingness to support our users with on-staff technical expertise. Contact us and we will assist you in solving your complex metering applications. Nexus® 1500+ web page: http://electroind.com/product-info/nexus-1500_plus-nextgeneration-power-quality-revenue-meter/ Electro Industries/GaugeTech™ 1800 Shames Drive, Westbury, NY 11590 1-877-EIMETER (1-877-346-3837) The Leader in Power Monitoring and Smart Grid Solutions™ Tel: 516-334-0870 Fax: 516-338-4741 Email: sales@electroind.com www.electroind.com E154718 012016 V.1.05
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2016:01:20 16:13:21-05:00 Metadata Date : 2016:01:20 16:14:12-05:00 Modify Date : 2016:01:20 16:14:12-05:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:58dfff98-573f-4a76-8d98-ca609cf5df49 Original Document ID : adobe:docid:indd:16dc73aa-227d-11e0-a17f-bf3b56d83edc Document ID : xmp.id:499E5F95BABFE511A8ABE4BDA445C314 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:489E5F95BABFE511A8ABE4BDA445C314 Derived From Document ID : xmp.did:93D352AA01BEE511B45A82F85738B188 Derived From Original Document ID: adobe:docid:indd:16dc73aa-227d-11e0-a17f-bf3b56d83edc Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2016:01:20 16:13:21-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 12 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools