NX Hubb NET Radio Module Specification Sheet
2017-10-13
: Pdf Nx Hubbnet Radio Module Specification Sheet NX_HubbNET_Radio_Module_Specification_Sheet spec products hba
Open the PDF directly: View PDF
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
NXRM SERIES HubbNETTM Radio Module Project Name Catalog No. Date The Hubbell Control Solutions NX Radio Module allows a luminaire equipped with the NXFM in-fixture module to be promoted wirelessly from standalone operation to full network participation. The radio module simply plugs into the SmartPORT TM connector on the fixture module and is mounted through an aperture in the luminaire housing giving the integral antenna line of sight access outside the fixture housing. The exposed portion of the NXRM radio module is low profile, with very little visual impact on the aesthetics of the luminaire. The NXRM is the ideal solution for applications where interconnecting fixtures with control wire is not practical or desired. Typical applications would include outdoor pole lighting, warehouse, exhibition halls, or any application that could benefit from wireless integrated fixture control. Product Features Compliance and Certification • Low profile housing for minimal visual impact • Mounts in 1.25” round aperture • O-ring gasket provides watertight seal to luminaire housing • Robust & reliable IEEE 802.15.4 2.4GHz wireless self-organizing and self-healing mesh network Dimensional Data • Integral compact PCB F antenna; no external antenna is required • Integrates seamlessly into the NX HubbNET distributed lighting control network 2.1” 1.5” • 12 VDC, 30 mA supplied by SmartPORT controller 1.2” 1.4” Ordering Information NXRM H MODEL NXRM Page 1 RADIO TYPE NX Radio Module H HubbNET Radio Module 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2017 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 3703A 101217 NXRM SERIES HubbNETTM Radio Module Wiring Information NXRM-H with Sensor NXRM-H without Sensor Page 2 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2017 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 3703A 101217 NXRM SERIES HubbNETTM Radio Module Wiring Information For SpectraSync™ applications, the highest CCT LED should be on CH1 and the lower CCT LED should be on CH2. NXRM-H with Sensor and Optional CTC For SpectraSync™ applications, the highest CCT LED should be on CH1 and the lower CCT LED should be on CH2. NXRM-H without Sensor and Optional CTC Page 3 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2017 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 3703A 101217 NXRM MODEL HubbNETTM Radio Module General Specifications RF Frequency ISM 2.4GHz RF Range Up to 1000 ft (Clear Line of Sight) Operating Environment Operating Temperature: -40°F to 185°F (-40° Cto 85°C) Relative humidity (non-condensing): 0 to 95% IP65 Rated Suitable for use in return air plenum Construction Housing: GSM UL Rated 94 HB Plastic Dimensions 2.1”L x 1.5”D Overall (1.4”L x 1.2”D Stem) 53.34mm L x 38.1mm D Overall (35.56mm L x 30.48mm D Stem) Weight 4.0 oz [113.4g] Color White, Black, Gray Mounting Mounts in 1.25” diameter aperture, secured by supplied nut on threaded body Certifications cULus listed, FCC Part 15.247, Conforms with UL916 and certified to CAN/CSA C22.2 No. 205-M1983, IC approved Warranty 5-year limited Page 4 701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.com Copyright © 2017 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. 3703A 101217