E5CNH E5AN H E5EN Digital Controllers User's Manual Omron
User Manual: Pdf Omron E5AN
Open the PDF directly: View PDF
Page Count: 376 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- E5CN-H E5AN-H E5EN-H Digital Controllers
- About this Manual:
- SECTION 1 Introduction
- SECTION 2 Preparations
- SECTION 3 Basic Operation
- 3-1 Initial Setting Examples
- 3-2 Setting the Input Type
- 3-3 Selecting the Temperature Unit
- 3-4 Selecting PID Control or ON/OFF Control
- 3-5 Setting Output Specifications
- 3-6 Setting the Set Point (SP)
- 3-7 Using ON/OFF Control
- 3-8 Determining PID Constants (AT, ST, Manual Setup)
- 3-9 Alarm Outputs
- 3-10 Using Heater Burnout, Heater Short, and Heater Overcurrent Alarms
- 3-11 Setting the No. 3 Display
- SECTION 4 Applications Operations
- 4-1 Shifting Input Values
- 4-2 Alarm Hysteresis
- 4-3 Setting Scaling Upper and Lower Limits for Analog Inputs
- 4-4 Executing Heating/Cooling Control
- 4-5 Using Event Inputs
- 4-6 Setting the SP Upper and Lower Limit Values
- 4-7 Using the SP Ramp Function to Limit the SP Change Rate
- 4-8 Moving to the Advanced Function Setting Level
- 4-9 Using the Key Protect Level
- 4-10 PV Change Color
- 4-11 Alarm Delays
- 4-12 Loop Burnout Alarm
- 4-13 Performing Manual Control
- 4-14 Using the Transfer Output
- 4-15 Using Banks and PID Sets
- 4-16 Using the Simple Program Function
- 4-17 Output Adjustment Functions
- 4-18 Using the Extraction of Square Root Parameter
- 4-19 Setting the Width of MV Variation
- 4-20 Setting the PF Key
- 4-21 Counting Control Output ON/OFF Operations
- 4-22 Displaying PV/SV Status
- 4-23 Using a Remote SP
- 4-24 Position-proportional Control
- 4-25 Logic Operations
- SECTION 5 Parameters
- SECTION 6 CALIBRATION
- 6-1 Parameter Structure
- 6-2 User Calibration
- 6-3 Thermocouple Calibration (Thermocouple/Resistance Thermometer Input)
- 6-4 Platinum Resistance Thermometer Calibration (Thermocouple/Resistance Thermometer Input)
- 6-5 Calibrating Analog Input (Analog Input)
- 6-6 Calibrating the Transfer Output
- 6-7 Checking Indication Accuracy
- Appendix
- Index
- Revision History