PCC114 Datasheet V1.0x V1.0
User Manual: Pdf PCC114-Datasheet-V1.0
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
Product Datasheet PCC114 RF Powerharvester Receiver Chip DESCRIPTION The Powercast PCC114 Powerharvester receiver is a wireless power RF energy harvesting device that is designed igned to convert RF energy to direct current (DC) (DC). It is designed to maximize the RF to DC conversion efficiency, up to 75%, while supporting a wide range of input power levels, vels, load voltages, and frequency bands. Housed in an extremely small SMD package, the PCC114 receiver provides RF energy harvesting for battery and capacitor recharging application applications. When paired with an appropriate antenna tthe PCC114 converts incoming RF energy to DC and provides the harvested energy to an attached storage element. FEATURES (Design Dependent) High RF to DC conversion efficiency, >75% Wide frequency bandwidth: 10MHz to 6GHz Wide operating power range: -17dBm 17dBm to +20dBm Harvests from all modulation types 50Ω input impedance Operation from 0V to support capacitor charging Interoperable with numerous RF sources: Powercaster TX91501 series transmitter, PowerSpot TX91503 transmitter, ransmitter, UHF RFID readers, Wi-Fi routers, NFC, etc. Industrial temperature range: -400 to +85C Converts low-level level RF signals enabling long range applications Extremely small 1 x 0.6 x 0.3mm profile RoHS Compliant APPLICATIONS Smart Card Battery Recharging Hearing Aid Battery Recharging High-function RFID Sensors/Displays/Microprocessors Battery-free wireless sensors Industrial Monitoring Building Automation Oil & Gas Medical Low power consumer electronics Spatially constrained battery recharging applications REFERENCE DESIGNS AVAILABLE NFC 13.56MHz RF Energy Harvesting UHF 915MHz (UHF RFID/PowerSpot) RFID/ RF Energy Harvesting 2.45GHz (Wi-Fi / BT) RF Energy Harvesting 1710-1915MHz 1915MHz 4G Cellular uplink RF Energy Harvesting Wi-Fi/BT 4G REFERENCE DESIGN INCLUDES: Schematic PCB Layout Bill of Material Performance Data ORDERING INFORMATION Qualified high-volume volume customers can obtain the Powercast Reference Design best suited for their application by contacting Powercast and completing a questionnaire and a reference design confidentiality agreement: http://www.powercastco.com/contact/ Powerharvester and Powercast are registered trademarks of Powercast Corporation. All other trademarks are the property of their the respective owners. Powercast products, reference designs, and technology are covered by one or more of the following patents and other patents pending: 6,289,237 | 6,615,074 | 6,856,291 | 7,027,311 | 7,057,514 | 7,639,994 | 7,643,312 | 7,812,771 | 7,844,306 | 7,868,482 | 7,898,105 7,898 | 7,925,308 | 8,159,090 | 8,350,255 | 8,432,062 | 8,461,817 | 8,621,245 | 9,000,616 | 9,021,277 | 9,107,579 | 9,251,699 | 9,706,924 2018/5 © 2018 Powercast Corporation. All rights reserved. www.powercastco.com / contact@powercastco.com +1 412-455-5800 P a g e| 1 Product Datasheet PCC114 RF Powerharvester Receiver Chip ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Parameter Rating Unit RF Input Power 23 dBm RFIN to GND 0 V VOUT to GND 4.3 V IOUT Current 100 mA Operating Temperature Range -40 to 85 °C Storage Temperature Range -40 to 85 °C Exceeding the absolute maximum ratings may cause permanent damage to the device. ESD CAUTION This is an ESD (electrostatic discharge) sensitive device. Proper ESD precautions should be taken to avoid degradation or damage to the component. SPECIFICATIONS TA = 25°C, VOUT = 3.0V, unless otherwise noted. Parameter RF Characteristics Input Power Frequency (1) DC Characteristics Output Voltage Output Current Output Current Symbol Condition Min Typ Max Unit RFIN -17 10 20 6000 dBm MHz VOUT IOUT IOUT 0 4.2 50 V mA A No RFIN -1.0 (1) Must be paired with appropriate antenna 2018/5 +1 412-455-5800 P a g e| 2 Product Datasheet PCC114 RF Powerharvester Receiver Chip TYPICAL APPLICATION CIRCUIT Receive Antenna PCC114 Reference Design Charge Management Battery GND 2018/5 +1 412-455-5800 P a g e| 3 Product Datasheet PCC114 RF Powerharvester Receiver Chip IMPORTANT NOTICE Information furnished by Powercast Corporation (Powercast) is believed to be accurate and reliable. However, no responsibility is assumed by Powercast for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications are subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Powercast. Trademarks and registered trademarks are the property of their respective owners. POWERCAST PRODUCTS (INCLUDING HARDWARE AND/OR SOFTWARE) ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE, FAULT TOLERANT OR FOR USE IN ANY APPLICATION THAT COULD LEAD TO DEATH, PERSONAL INJURY OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (INDIVIDUALLY AND COLLECTIVELY, “CRITICAL APPLICATIONS”), SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, CLASS III MEDICAL DEVICES, NUCLEAR FACILITIES, APPLICATIONS THAT AFFECT CONTROL OF A VEHICLE OR AIRCRAFT, APPLICATIONS RELATED TO THE DEPLOYMENT OF AIRBAGS, OR ANY OTHER CRITICAL APPLICATIONS. CUSTOMER AGREES, PRIOR TO USING OR DISTRIBUTING ANY SYSTEMS THAT INCORPORATE POWERCAST PRODUCTS, TO THOROUGHLY TEST THE SAME FOR SAFETY PURPOSES. CUSTOMER ASSUMES THE SOLE RISK AND LIABILITY OF ANY USE OF POWERCAST PRODUCTS IN CRITICAL APPLICATIONS, SUBJECT ONLY TO APPLICABLE LAWS AND REGULATIONS GOVERNING LIMITATIONS ON PRODUCT LIABILITY. Powercast warrants its products in accordance with Powercast’s standard warranty available at www.powercastco.com. 2018/5 +1 412-455-5800 P a g e| 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Warning : Info object (98 0 obj) not found at 948865EXIF Metadata provided by EXIF.tools