PCC114 Datasheet V1.0x V1.0

User Manual: Pdf PCC114-Datasheet-V1.0

Open the PDF directly: View PDF PDF.
Page Count: 4

Product
Datasheet
PCC114 RF
Powerharvester
2018/5
Powerharvester and Powercast are registered trademarks of Powercast Corporation. All other trademarks are the property of the
Powercast products, reference designs, and technology are covered by one or more of the following patents and
© 2018 Powercast
Corporation.
DESCRIPTION
The Powercast PCC114
Powerharvester
wireless power
RF energy harvesting device that
des
igned to convert RF energy to direct current (DC)
It is designed to maximize the
RF to DC conversion
efficiency, up to 75%, while supporting a wide range
of input power le
vels, load voltages, and frequency
bands.
Housed in an extremely small
SMD package, the
PCC114
receiver provides RF energy harvesting
battery and capacitor recharging
application
paired with an appropriate antenna t
converts incoming RF
energy to DC and provides the
harvested energy to an
attached storage element.
FEATURES
(Design Dependent)
High RF to DC conversion efficiency, >75%
Wide frequency bandwidth: 10MHz to 6GHz
Wide operating power range: -
17dBm to +20dBm
Harvests from all modulation types
50Ω input impedance
Operation from 0V to support capacitor charging
Interoperable with
numerous RF sources:
Powercaster
TX91501 series transmitter,
PowerSpot TX91503 t
ransmitter, UHF
readers, Wi-Fi routers, NFC, etc.
Industrial temperature range: -4
0 to +85C
Converts low-
level RF signals enabling long range
applications
Extremely small 1 x 0.6 x
0.3mm profile
RoHS Compliant
APPLICATIONS
Smart Card Battery Recharging
Hearing Aid Battery Recharging
High-function RFID
-
Sensors/Displays/Microprocessors
Battery-free wireless sensors
- Industrial Monitoring
- Building Automation
- Oil & Gas
- Medical
Low power consumer electronics
-
Spatially constrained battery recharging
applications
Datasheet
Powerharvester
Receiver Chip
Powerharvester and Powercast are registered trademarks of Powercast Corporation. All other trademarks are the property of the
Powercast products, reference designs, and technology are covered by one or more of the following patents and
6,289,237 | 6,615,074 | 6,856,291 | 7,027,311 | 7,057,514 | 7,639,994 | 7,643,312 | 7,812,771 | 7,844,306 | 7,868,482 | 7,898
7,925,308 | 8,159,090 | 8,350,255 | 8,432,062 | 8,461,817 | 8,621,245 | 9,000,616 | 9,021,277 |
9,107,579 | 9,251,699 | 9,706,924
Corporation.
All rights reserved. www.powercastco.com /
contact@powercastco.com
Powerharvester
receiver is a
RF energy harvesting device that
is
igned to convert RF energy to direct current (DC)
.
RF to DC conversion
efficiency, up to 75%, while supporting a wide range
vels, load voltages, and frequency
SMD package, the
receiver provides RF energy harvesting
for
application
s. When
paired with an appropriate antenna t
he PCC114
energy to DC and provides the
attached storage element.
(Design Dependent)
High RF to DC conversion efficiency, >75%
Wide frequency bandwidth: 10MHz to 6GHz
17dBm to +20dBm
Operation from 0V to support capacitor charging
numerous RF sources:
TX91501 series transmitter,
ransmitter, UHF
RFID
0 to +85C
level RF signals enabling long range
0.3mm profile
Sensors/Displays/Microprocessors
Spatially constrained battery recharging
REFERENCE DESIGNS AVAILABLE
NFC 13.56MHz
RF Energy Harvesting
UHF
915MHz (UHF RFID/
Energy Harvesting
Wi-Fi/BT 2.45GHz (Wi-Fi
/ BT) RF Energy
Harvesting
4G 1710-
1915MHz 4G Cellular uplink RF
Energy Harvesting
REFERENCE DESIGN INCLUDES:
Schematic
PCB Layout
Bill of Material
Performance Data
ORDERING INFORMATION
Qualified high-
volume customers can obtain the Powercast
Reference Design best suited for their application by contacting
Powercast and completing a questionnaire and a reference
design confidentiality agreement:
http://www.powercastco.com/contact/
+1
412
-
455
-
5800
P a g e | 1
Powerharvester and Powercast are registered trademarks of Powercast Corporation. All other trademarks are the property of the
ir respective owners.
Powercast products, reference designs, and technology are covered by one or more of the following patents and
other patents pending:
6,289,237 | 6,615,074 | 6,856,291 | 7,027,311 | 7,057,514 | 7,639,994 | 7,643,312 | 7,812,771 | 7,844,306 | 7,868,482 | 7,898
,105 |
9,107,579 | 9,251,699 | 9,706,924
contact@powercastco.com
RF Energy Harvesting
915MHz (UHF RFID/
PowerSpot) RF
/ BT) RF Energy
1915MHz 4G Cellular uplink RF
volume customers can obtain the Powercast
Reference Design best suited for their application by contacting
Powercast and completing a questionnaire and a reference
http://www.powercastco.com/contact/
Product
Datasheet
PCC114 RF
Powerharvester
2018/5
ABSOLUTE MAXIMUM
RATINGS
TA = 25°C, unless otherwise noted.
ESD CAUTION
This is an ESD (electrostatic
discharge)
precautions should be taken to
avoid
component.
SPECIFICATIONS
TA = 25°C, VOUT = 3.0V,
unless otherwise noted.
Parameter
RF Characteristics
Input Power
Frequency (1)
DC Characteristics
Output
Voltage
Output
Current
Output
Current
(1)
Must be paired with appropriate antenna
Parameter
RF Input Power
RFIN to GND
VOUT to GND
IOUT Current
Operating Temperature Range
Storage Temperature Range
Datasheet
Powerharvester
Receiver Chip
RATINGS
discharge)
sensitive device. Proper ESD
avoid
degradation or damage to the
unless otherwise noted.
Symbol
Condition
Min
Typ
RFIN
-17
10
6000
VOUT
0
-1.0
I
OUT
I
OUT
No RF
IN
Must be paired with appropriate antenna
Exceeding
absolute maximum
ratings
permanent
damage
device.
Rating Unit
23 dBm
0 V
4.3 V
100 mA
-40 to 85 °C
-40 to 85 °C
+1
412
-
455
-
5800
P a g e | 2
Max
Unit
20
6000
dBm
MHz
4.2
V
50
mA
A
Exceeding
the
absolute maximum
ratings
may cause
permanent
damage
to the
device.
Product
Datasheet
PCC114 RF
Powerharvester
2018/5
TYPICAL APPLICATION
CIRCUIT
PCC114
Reference
Design
GND
Receive Antenna
Datasheet
Powerharvester
Receiver Chip
CIRCUIT
PCC114
Reference
Design
Charge
Management
+1
412
-
455
-
5800
P a g e | 3
Management
Battery
Product
Datasheet
PCC114 RF
Powerharvester
2018/5
Information furnished by
Powercast
reliable. However, no
responsibility
infringements of patents or
other
Specifications are subject to
change
No license is granted by
implication
Powercast. Trademarks and
registered
POWERCAST PRODUCTS
(INCLUDING
DESIGNED OR INTENDED
TO
ANY APPLICATION THAT
COULD
PROPERTY OR
ENVIRONMENTAL
“CRITICAL
APPLICATIONS”),
SYSTEMS, CLASS III
MEDICAL
THAT AFFECT CONTROL OF
TO THE DEPLOYMENT OF
AIRBAGS,
CUSTOMER AGREES, PRIOR
INCORPORATE
POWERCAST
SAFETY PURPOSES.
CUSTOMER
USE OF POWERCAST
PRODUCTS
APPLICABLE LAWS AND
REGULATIONS
LIABILITY.
Powercast warrants its products
www.powercastco.com.
Datasheet
Powerharvester
Receiver Chip
IMPORTANT NOTICE
Powercast
Corporation (Powercast) is believed to be
accurate
responsibility
is assumed by Powercast for its use, nor for
other
rights of third parties that may result from its
use.
change
without notice.
implication
or otherwise under any patent or patent
rights
registered
trademarks are the property of their
respective
(INCLUDING
HARDWARE AND/OR
SOFTWARE)
TO
BE FAIL-SAFE, FAULT TOLERANT OR
FOR
COULD
LEAD TO DEATH, PERSONAL
INJURY
ENVIRONMENTAL
DAMAGE (INDIVIDUALLY AND
COLLECTIVELY,
APPLICATIONS”),
SUCH AS LIFE-SUPPORT OR SAFETY
DEVICES
MEDICAL
DEVICES, NUCLEAR FACILITIES,
APPLICATIONS
A VEHICLE OR AIRCRAFT,
APPLICATIONS
AIRBAGS,
OR ANY OTHER CRITICAL
APPLICATIONS.
TO USING OR DISTRIBUTING ANY
SYSTEMS
POWERCAST
PRODUCTS, TO THOROUGHLY TEST
THE
CUSTOMER
ASSUMES THE SOLE RISK AND
LIABILITY
PRODUCTS
IN CRITICAL APPLICATIONS,
SUBJECT
REGULATIONS
GOVERNING LIMITATIONS
ON
in accordance with Powercast’s standard
warranty
+1
412
-
455
-
5800
P a g e | 4
accurate
and
any
use.
rights
of
respective
owners.
SOFTWARE)
ARE NOT
FOR
USE IN
INJURY
OR SEVERE
COLLECTIVELY,
DEVICES
OR
APPLICATIONS
APPLICATIONS
RELATED
APPLICATIONS.
SYSTEMS
THAT
THE
SAME FOR
LIABILITY
OF ANY
SUBJECT
ONLY TO
ON
PRODUCT
warranty
available at

Navigation menu