Quectel BC95 AT Commands Manual V1.3
User Manual: Pdf
Open the PDF directly: View PDF
Page Count: 59
- About the Document
- Contents
- Table Index
- 1 Introduction
- 2 Implementation Status
- 3 3GPP Commands
- 3.1. AT+CGMI Request Manufacturer Identification
- 3.2. AT+CGMM Request Manufacturer Model
- 3.3. AT+CGMR Request Manufacturer Revision
- 3.4. AT+CGSN Request Product Serial Number
- 3.5. AT+CEREG EPS Network Registration Status
- 3.6. AT+CSCON Signalling Connection Status
- 3.7. AT+CLAC List Available Commands
- 3.8. AT+CSQ Get Signal Strength Indicator
- 3.9. AT+CGPADDR Show PDP Addresses
- 3.10. AT+COPS PLMN Selection
- 3.11. AT+CGATT PS Attach or Detach
- 3.12. AT+CIMI Request International Mobile Subscriber Identity
- 3.13. AT+CGDCONT Define PDP Context
- 3.14. AT+CFUN Set Phone Functionality
- 3.15. AT+CMEE Report Mobile Termination Error
- 4 Neul Commands
- 4.1. AT+NMGS Neul Send Message Command
- 4.2. AT+NMGR Neul Get Message Command
- 4.3. AT+NNMI Neul New Message Indications
- 4.4. AT+NSMI Neul Sent Message Indications
- 4.5. AT+NQMGR Neul Query Messages Received
- 4.6. AT+NQMGS Neul Query Messages Sent
- 4.7. AT+NRB Neul Reboot
- 4.8. AT+NCDP Configure and Query CDP Server Settings
- 4.9. AT+NUESTATS Query UE Statistics
- 4.10. AT+NEARFCN Specify Search Frequencies
- 4.11. AT+NSOCR Create Socket
- 4.12. AT+NSOST SendTo Command (UDP Only)
- 4.13. AT+NSORF Receive Command (UDP Only)
- 4.14. AT+NSOCL Close Socket
- 4.15. +NSONMI Socket Message Arrived Indicator (Response Only)
- 4.16. AT+NPING Test IP Network Connectivity To A Remote Host
- 4.17. AT+NBAND Set Supported Bands
- 4.18. AT+NLOGLEVEL Set Debug Logging Level
- 4.19. AT+NCONFIG Configure UE Behaviour
- 5 Temporary Commands
- 6 Error Values
- 7 Examples
- 8 Appendix A Reference