STM32 Nucleo 64 Board Boards User Manual

• Figure 1. STM32 Nucleo-64 board (1)
• 1 Features
• 2 Product marking
• 3 Ordering information
  • Table 1. Ordering information
  • Table 2. Codification explanation
• 4 Conventions
  • Table 3. ON/OFF conventions
• 5 Quick start
  • 5.1 Getting started
  • 5.2 System requirements
  • 5.3 Development toolchains
  • 5.4 NUCLEO-L476RG bootloader limitations
  • 5.5 Hardware configuration variants
• 6 Hardware layout and configuration
  • Figure 2. Hardware block diagram
  • Figure 3. Top layout
  • Figure 4. Bottom layout
  • Figure 5. STM32 Nucleo board mechanical dimensions
  • 6.1 Cuttable PCB
  • 6.2 Embedded ST-LINK/V2-1
    • Table 4. Jumper states
    • Figure 6. Typical configuration
    • 6.2.1 Driver
      • Figure 7. Updating the list of drivers in Device Manager
    • 6.2.2 ST-LINK/V2-1 firmware upgrade
    • 6.2.3 Using the ST-LINK/V2-1 to program and debug the STM32 on board
      • Figure 8. Connecting the STM32 Nucleo board to program the on-board STM32
    • 6.2.4 Using ST-LINK/V2-1 to program and debug an external STM32 application
      • Table 5. Debug connector CN4 (SWD)
      • Figure 9. Using ST-LINK/V2-1 to program the STM32 on an external application
  • 6.3 Power supply and power selection
    • 6.3.1 Power supply input from the USB connector
      • Table 6. JP1 configuration table
    • 6.3.2 External power supply inputs: VIN and E5V
      • Table 7. External power sources
      • Table 8. Power-related jumper
    • 6.3.3 External power supply input: + 3.3V
      • Table 9. +3.3V external power source
    • 6.3.4 External power supply output
  • 6.4 LEDs
  • 6.5 Push-buttons
  • 6.6 JP6 (IDD)
  • 6.7 OSC clock
    • 6.7.1 OSC clock supply
    • 6.7.2 OSC 32 KHz clock supply
  • 6.8 USART communication
  • 6.9 Solder bridges
    • Table 10. Solder bridges
  • 6.10 Extension connectors
    • Figure 10. NUCLEO-F030R8
    • Figure 11. NUCLEO-F070RB
    • Figure 12. NUCLEO-F072RB
    • Figure 13. NUCLEO-F091RC
    • Figure 14. NUCLEO-F103RB
    • Figure 15. NUCLEO-F302R8
    • Figure 16. NUCLEO-F303RE
    • Figure 17. NUCLEO-F334R8
    • Figure 18. NUCLEO-F401RE
    • Figure 19. NUCLEO-F411RE
    • Figure 20. NUCLEO-L053R8
    • Figure 21. NUCLEO-L073RZ
    • Figure 22. NUCLEO-L152RE
    • Figure 23. NUCLEO-L452RE
    • Figure 24. NUCLEO-L476RG
    • Figure 25. NUCLEO-F446RE
    • Figure 26. NUCLEO-F410RB
  • 6.11 Arduino connectors
    • Table 11. Arduino connectors on NUCLEO-F030R8, NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC
    • Table 12. Arduino connectors on NUCLEO-F103RB
    • Table 13. Arduino connectors on NUCLEO-F302R8
    • Table 14. Arduino connectors on NUCLEO-F303RE
    • Table 15. Arduino connectors on NUCLEO-F334R8
    • Table 16. Arduino connectors on NUCLEO-F401RE and NUCLEO-F411RE
    • Table 17. Arduino connectors on NUCLEO-L053R8
    • Table 18. Arduino connectors on NUCLEO-L073RZ
    • Table 19. Arduino connectors on NUCLEO-F446RE
    • Table 20. Arduino connectors on NUCLEO-F410RB
    • Table 21. Arduino connectors on NUCLEO-L152RE
    • Table 22. Arduino connectors on NUCLEO-L452RE
    • Table 23. Arduino connectors on NUCLEO-L476RG
  • 6.12 ST morpho connector
    • Table 24. ST morpho connector on NUCLEO-F030R8
    • Table 25. ST morpho connector on NUCLEO-F070RB
    • Table 26. ST morpho connector on NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F303RE, NUCLEO-F334R8
    • Table 27. ST morpho connector on NUCLEO-F103RB
    • Table 28. ST morpho connector on NUCLEO-F302R8
    • Table 29. ST morpho connector on NUCLEO-F401RE, NUCLEO-F411RE, NUCLEO-F446RE
    • Table 30. ST morpho connector on NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE
    • Table 31. ST morpho connector on NUCLEO-L452RE
    • Table 32. ST morpho connector on NUCLEO-L476RG
    • Table 33. ST morpho connector on NUCLEO-F410RB
• Appendix A Electrical schematics
  • Figure 27. Top and Power
  • Figure 28. STM32 MCU
  • Figure 29. ST-LINK/V2-1
  • Figure 30. Extension connectors
• Revision history
  • Table 34. Document revision history