SG Series
2017-11-04
: Pdf Sg Series SG_series spec products outdoor
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
SLING SERIES Cat.# Type Job Approvals SG B C D 1 CRITICAL DIMENSIONS SHT 1 9 SHTS REV. SLING_MTO P1 DRAWING NO. 2 D SIZE NTS SCALE 02/16/17 NPD-01685 C 9.52" 242 mm Weight 11 lbs. 5 kg 3 JLP CATALOG NO: Weight 4.4 lbs. 2 kg THIRD ANGLE PROJECTION N/A 02/16/17 MATERIAL: DSH ENGINEERING: C 6.61" 168 mm 11.14 4 C A 5.80" 147 mm B 9.52 11.14" 283 mm 5 A SG2 with occupancy sensor and battery options 6 Warranty: Five year limited warranty (for more information visit: http://www.hubbelllighting.com/resources/ warranty/ DO NOT SCALE PRINT 11.14 B 5.80 CRITICAL DIMENSIONS SG2 4.19 UNSPECIFED TOLERANCES: INCHES X.X= 0.1 X.XX= 0.03 X.XXX= 0.010 FRACTIONS= 1/32 ANGULAR TOLERANCE= 1 DRAWN BY: DIMENSIONS IN INCHES JLP 02/10/17 DIMENSIONS IN [ ] IN MM CONFORMS TO ASME Y14.5M CHECKED BY: P1 A 1 A SLING_MTO PART NO: FINISH: N/A ASSY-SLING DSH JLP RECORD A B 4.19" 9.52 7.80" 6.61 106.5 mm 9.52 198 mm DATE 2 7.80 B 5.80 REV Installation: • Side hinge allows for easy installation and wiring. • Side movement avoids damage to the lens and helps prevent injury common in drop down hinge designs. • Mounts to 4” junction box and includes a gasket to help seal electrical connections. • Four ½” threaded conduit hubs for surface conduit provided C 11.147.80 Listings • DesignLights Consortium® (DLC) qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org • Listed to UL1598 for use in wet location, listed for -40C to 40C applications • IDA approved with zero uplight for 3000K and warmer CCTs • IP65 Lenses: • Impact resistant tempered glass offers zero uplight • Comfort lens available as an option or accessory to reduce glare (7-10% lumen reduction) and provide better uniformity JLP DSH DESN CHCK RECORD PRELIMINARY 2 DATE SG1 2/16/17 LED(s) Optics, CCT: • 3000K, 4000K and 5000K CCT nominal with 70 CRI • Smaller SG1 housing has 2 LEDs, larger SG2 housing has 3 LEDS, see page 2 for electrical and photometric data 2/16/17 P1 6.61 DIMENSIONS PRELIMINARY 1 REV 4.19 5.80 DESN CHCK Electrical: • 120-277V, 50/60Hz electronic drivers • 347V and 480V available in larger SG2 housing • 10KA surge protection included SG2 SG1 This document contains confidential and proprietary information of Hubbell Lighting. Receipt or possession of this document does not convey any rights to reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, without the specific written authorization of Hubbell Lighting, may violate the intellectual property rights of Hubbell Lighting. D Construction: Rugged die-cast aluminum housing with corrosion resistant powder coat finish both protects and provides architectural appearance. Heat dissipating fins provide superior thermal performance extending the life of the electronic components. PRODUCT IMAGE(S) B Options/Controls • Button photocontrol for dusk to dawn energy savings. Stock versions include 120V-277V PC with a cover which provides a choice to engage photocontrol or not. PC is installed in top hub. • Occupancy sensor available for on/off and dimming control in larger SG2 housing. • SiteSync™ wireless lighting control delivers flexible control strategies for reducing power consumption and minimizing maintenance costs while delivering the right light levels with a simple and affordable wireless solution See ordering information or visit www.hubbelllighting.com/sitesync for more details. • Battery backup options available in larger SG2 housing rated for either 0˚ C or -30˚ C. Performance exceeds NEC requirement providing 1 fc minimum over 10’x10’ at 11’ mounting height • Diffused comfort lens provides glare control and improved uniformity. Available as an option or accessory Intended Use: Slender wallpack/floodlight available in two sizes for a variety of applications including building perimeter/security lighting, entrances, stairways, loading docks or facades for schools, apartments or commercial buildings. C SPECIFICATIONS B C A B 13.84" 351.5 mm C 9.52" 242 mm 7 A 7.26" 184.1 mm Weight 11 lbs. 5 kg SHIPPING INFORMATION Carton Dimensions 8 Catalog Number *3000K and warmer CCTs only G.W(kg)/ CTN Length Inch (cm) Width Inch (cm) Height Inch (cm) Carton Qty. per Master Pack Pallet Qty. A CERTIFICATIONS/LISTINGS SG1 4.35lbs (2 kg) 9.5 (24) 8.25 (21) 5.25 (13.32) 6 98 SG2 11lbs (5 kg) 14 (35.5) 11.5 (29.2) 8 (20.3) 2 64 ORDERING INFORMATION – ORDERING EXAMPLE: SG1-20-4K7-FT-UNV-DB FT FAMILY SG1-20 SG1-30 SG2-50 SG2-80 1 2 3 Size 1, 20w Size 1, 30w Size 2, 50w Size 2, 80w CCT/CRI DISTRIBUTION 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI FT Fwd Throw VOLTAGE UNV 1201 2771 UHV1 UHV available in SG2-50 only Sensor controls & battery backup can not be used with flood accessory or kit or for inverted/up mounting, 120-277V only for SCO/SCP, 120 or 277 only for SWP, SWPM, E & EH Must order minimum of one remote control to program dimming settings, 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, 120-277V only 120V-277V 120V 277V 347V-480V COLOR/FINISH CONTROL OPTIONS OPTIONS DB Textured Dark Bronze BL Textured Black WH Textured White PCU Button Photocontrol 120-277V SCO1,2 Sensor Control, on/off SCP1,2,3 Sensor Control, Programmable SWP1,2 SiteSync, Precommission SWPM1,2 SitySync, Precommission, Motion CS Comfort lens E1,2 Battery 0oC EH1,2 Battery w/ GYS Smooth Gray PS Smooth Plat. Silver CC Custom Color heater -20oC Specify MTG HT for SCO/SCP & SWPM 8F Up to 8’ 20F Up to 20’ WINTER E/EH Battery backup Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2017 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SG-SPEC October 11, 2017 8:19 AM ORDERING INFORMATION - Stock Versions Catalog Number CCT/CRI SG1-20-PCU 5000K/70 SG1-20-4K-PCU 4000K/70 SG1-30-PCU 5000K/70 SG1-30-4K-PCU 4000K/70 Catalog Number SG2-50-PCU 5000K/70 4000K/70 SG2-80-PCU 5000K/70 SG2-80-4K-PCU 4000K/70 PERFORMANCE DATA Catalog number SG1-20 SG1-30 SG2-50-UHV SG2-50 # of LEDs 2 3 3 SG2-80 Mounting Height 21w 8-12ft 29w 10-15ft Wattage Mounting Height 51w 12-18ft Voltage 120-277V CCT/CRI SG2-50-4K-PCU Wattage Lumens Dark Bronze Voltage 120-277V 80w Color Color Dark Bronze 15-25ft 5K (5000K nominal, 70 CRI) 4K (4000K nominal, 70 CRI) Weight lbs. (kg) LPW 2263 108 2310 110 3270 113 3060 105 Lumens LPW 5548 110 5526 109 8061 101 8079 101 4.3 (2) Weight lbs. (kg) 11 (5) 3K (3000K nominal, 80 CRI) Drive Current 250mA System Watts 21 Lumens 2449 LPW1 115 B 1 U 0 G 0 Lumens 2310 LPW1 110 B 1 U G 0 0 350mA 29 3332 117 2 0 0 3060 106 1 0 350mA 44 4633 106 2 0 0 4609 105 2 0 415mA 51 5548 109 2 0 0 5526 107 2 650mA 80 7851 98 2 0 1 8079 103 2 Lumens 2054 LPW1 95 B 1 U 0 G 0 0 2913 100 1 0 0 0 3895 90 2 0 0 0 0 4700 92 2 0 0 0 1 6721 86 2 0 1 1. Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application. ELECTRICAL DATA Configurable Versions Catalog number # of Drivers SG1-20 1 SG1-30 1 SG2-50-UHV 1 SG2-50 1 SG2-80 1 Input Voltage 120 277 120 277 347 480 120 277 120 277 Current (Amps) System Power 0.18 21.0 0.08 21.0 0.24 28.9 0.10 28.9 0.13 43.5 0.18 43.5 0.42 50.6 0.18 50.6 0.68 79.8 0.29 79.8 PROJECTED LUMEN MAINTENANCE LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) OPERATING HOURS TM-21-111 25,000 50,000 L96 60,000 Ambient Temp. 0 100,000 L70 (hours) 25°C / 77°F 1.00 0.98 0.97 0.96 0.95 >791,000 40°C / 104°F 0.99 0.98 0.96 0.96 0.94 >635,000 1. Projected per IESNA TM-21-11 * (Nichia 219B, 700mA, 85°C Ts, 10,000hrs) Data references the extrapolated performance projections for the LNC-12LU-5K base model in a 40°C ambient, based on 10,000 hours of LED testing per IESNA LM-80-08. AMBIENT TEMPERATURE 0˚ C 32˚ F 10˚ C 50˚ F 20˚ C 68˚ F 25˚ C 77˚ F 30˚ C 86˚ F 40˚ C 104˚ F 50˚ C 122˚ F LUMEN MULTIPLIER 1.02 1.01 1.00 1.00 1.00 0.99 0.96 Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). Wireless and Occupancy Controls SiteSync™ Lighting Control delivers flexible control strategies for reducing power consumption and minimizing maintenance costs while delivering the right light levels with a simple and affordable wireless solution. Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2017 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SG-SPEC October 11, 2017 8:19 AM OPTIONS AND ACCESSORIES Catalog Number Description Weight lbs. (kg) SG1-CS Acrylic comfort lens for SG1 SG2-CS Acrylic comfort lens for SG2 SG1-YOKE SG1 Series Yoke/Floodlight mount kit, includes visor 2.0 (1.0) SG1-KNUCKLE SG1 Series Knuckle/Floodlight mount kit, includes visor 2.0 (1.0) SG2-YOKE SG2 Series Yoke/Floodlight mount kit, includes visor 2.0 (1.0) SG2-KNUCKLE SG2 Series Knuckle/Floodlight mount kit, includes visor 2.0 (1.0) SCP-REMOTE* Remote control for SCP option. Order at least one per project to program and control fixtures 1 (.45) SG2-PMA-3-XX 3" Pole Mount arm for SG2, both square and round, XX= finish 7 (3.5) SG2-PMA-4-XX 4" Pole Mount arm for SG2, both square and round, XX= finish 7 (3.5) SG2-PMA-5-XX 5" Pole Mount arm for SG2, both square and round, XX= finish 7 (3.5) SG2-PMA-6-XX 6" Pole Mount arm for SG2, both square and round, XX= finish 7 (3.5) SG1-SPC Vandal Resistant Lens (shield polycarbonate), SG1 3 (1.5) SG2-SPC Vandal Resistant Lens (shield polycarbonate), SG2 3 (1.5) SG1-WCP Universal Wall Cover Plate, Dark Bronze, SG1 10 (5) SG2-WCP-H Horizontal Mount Wall Cover Plate, Dark Bronze, SG2 10 (5) SG2-WCP-V Vertical Mount Wall Cover Plate, Dark Bronze, SG2 10 (5) SG2XL-WCP-H Horizontal Mount Wall Cover Plate, DB, SG2 with battery or sensor 10 (5) SG2XL-WCP-V Vertical Mount Wall Cover Plate, DB, SG2 with battery or sensor 10 (5) 1 (.45) 1 (.45) *Must order minimum of one remote control to program dimming settings, 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, 120V or 277V only Comfort Lens Mounting Options Visor Photocontrol Hinged Housing Door Acrylic comfort lens provides Visor accessory included Flood mounting accessories - 1/2" threaded knuckle Photocontrol option avail- Side hinged for easy installation able for energy-saving glare control, improved visual with mounting accessory or yoke (includes grommet and 3' SO cord) and wiring access, single screw dusk-to-dawn operation secures housing closure comfort and better uniformity kits SG(X)-PMA-(X)-XX SG(X)-CS SG(X)-SPC SG(X)-YOKE SG(X)-KNUCKLE SG(X)-WCP-H SG(X)-WCP-V Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2017 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SG-SPEC October 11, 2017 8:19 AM PHOTOMETRICS 30' 20' 30' 36' 20' 24' 36' 24' .2fc .2fc .5fc .5fc 10' 10' 12' 12' 1fc 1fc 2fc 2fc 0' 10' 20' 10' 0' 10' 20' 0' 0' 10' 12' 0' 24' 12' SG1-20 0' 12' 24' 12' SG1-30 Mounting Height 10ft Mounting Height 45' 45' 30' 30' .2fc 12ft 60' 40' 40' .2fc .5fc 15' Exceeds Life Safety Code average illuminance of 1.0 fc. at 12ft mounting height. Assumes open space with no obstructions. 60' .5fc 1fc Battery back up feature with side indicator. Diagrams for illustration purposes only, please consult factory for application layout. HUBBELL OUTDOOR LIGHTING SG1-20-PCU Sling 15' Emergency Mode (EH) 1fc 20' 20' 33' Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. 2fc of manufacturers photometric file. Results derived from content 2fc 33' Horizontal Footcandles Scale: 1 Inch = 10 Ft. Light Loss Factor = 1.00 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 2263 Mounting Height = 10.00 Ft 22' Maximum Calculated Value = 10.92 Fc Arrangement: Single HUBBELL OUTDOOR LIGHTING SG1-30-PCU Sling 22' .2fc 11' Page 1 11' .5fc Photometric Toolbox Professional Edition Calculations based on published IES Me Results derived from content of manufac 1fc 0' 15' 30' 15' 0' 15' SG2-50 Mounting Height 30' 0' 0' 15' 20' 40' 20' 0' 20' SG2-80 15ft Mounting Height 40' 0' 0' 20' 11' 2fc 22' 11' 0' 0' 11' 22' 11' SG2 in E or EH Emergency mode 20ft Mounting Height HUBBELL OUTDOOR LIGHTING SG2-80-PCU HUBBELL OUTDOOR LIGHTING Sling SG2-50-PCU Sling 11ft Horizontal Footcandles Scale: 1 Inch 15 Ft. = N Lumens Per= Lamp Light Loss Factor = 1.00 Lumens Per Lamp = N.A. (absolute photometry) M Luminaire LumensMaximum = 4961 C Mounting Height = 15.00 Ft Maximum Calculated Value = 12.05 Fc Arrangement: Single Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from contentbyofLighting manufacturers photometric file. Photometric Toolbox Professional Edition - Copyright 2002-2011 Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2017 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SG-SPEC October 11, 2017 8:19 AM Page 1