INSTRUCTIONS FOR MAKING YOUR OWN CIRCUIT DRAWINGS Snap Designer

User Manual: Pdf SnapDesigner

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

INSTRUCTIONS FOR MAKING YOUR OWN CIRCUIT DRAWINGS
(BASED ON MICROSOFT® WORD 2010)
Elenco® provides the part symbols below so that our customers can make their own custom circuit drawings.
Use the drawing features available in Microsoft® Word 2010. If the drawing toolbar is not visible select
 -  - . If you have any questions about how to use Word, click on  with
left mouse button or press  + . Contact Elenco® to purchase upgrade sets or individual parts by
clicking on the link shown here: https://www.elenco.com/
1.

2.
3.
4.

5.

While holding down the control key , click and drag any part to the grid to make a copy of that
part on the grid. You may drag any number of parts to the grid as long as you hold down the control
key and they will be duplicated on the grid. The original part should still be on the page in its original
position if needed again.
To rotate a part, select the part then click on  in the drawing menu. Move to 
and then click on  or .
To move parts from bottom to top click on the part you want to move with the left mouse button, and
then click on . Next go to  and select .
To print your drawing, use