SSS H Poles Spec Sheet

: Pdf Sss-H Poles Spec Sheet SSS-H_Poles_spec_sheet spec products outdoor

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

SSS-H SERIES
POLES

Cat.#
Type

Job

Approvals

SQUARE STRAIGHT STEEL

APPLICATIONS
• Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum
allowable loading of the specified pole in its installed geographic location
CONSTRUCTION
• SHAFT: One-piece straight steel with square cross section, flat sides and minimum 0.238” radius on all corners; Minimum
yield of 46,000 psi (ASTM-A500, Grade B); Longitudinal weld seam to appear flush with shaft side wall; Steel base plate
with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36)
• BASE COVER: Two-piece square aluminum base cover included standard
• POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available
• HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug
located
gasketed cover
BASEbehind
COVER
• ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554).
Galvanized hardware with two washers and two nuts per bolt for leveling
Overall
Height 10' - 40'
FINISH
• Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness
• Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method
Anchor Base Detail
Overall
• Decorative finish coat available in seven standard colors; Custom colors available; RAL number preferable;
Height 10'-30'
Round Straight and Tapered Poles
Internal protective coating available
Straight Square
Anchor Base Detail

180°

180°

Bolt Slots/Holes

Bolt Slots/Holes

Bolt Circle

As viewed
from top
of pole.

90°
Arm 2

Bolt Square

180°

180°

Bolt Slots/Holes

As viewed
from top
of pole.

0°-Handhole

Bolt Square

270°
Arm 1

0°-Handhole

As viewed
from top
of pole.

90°
Arm 2

0°-Handhole

Anchor Bolt
VIBRATION DAMPER
Location in
2ND MODE

270°
Arm 1

18"

Handhole

Handhole
18"

POLE CAP

TENON

Handhole

BASEHeight
COVER
of option in feet BASE DETAIL

Bolt Square (Outer)
Bolt Circle

90°
Arm 2

180°

Bolt Slots/Holes

0˚ 270°

As viewed
from top
of pole.

Base Plate

Bolt Slots/Holes

Bolt Projection

Bolt Square (Inner) Bolt Circle
As viewed
from top
of pole.

90°
Arm 2

Arm 1
Handhole

270°
Arm 1

Flat Washer
Hex Nut

Bolt Circle (Outer)
Bolt Square

0°-Handhole

Bolt Square

0°-Handhole

90˚

270˚

Grout with drain
Optional
Level Foundation

Bolt Circle (Inner)
180˚

TENON

ORDERING INFORMATION
ORDERING EXAMPLE:

SSS H
SERIES

SSS-H Square Straight

Steel Pole
Hubbell Outdoor

25

40

A/B/C

HEIGHT

SHAFT

Reference page 2
Ordering matrix

Reference page 2
Ordering matrix

1

12L

2
2L

MOUNTING ORIENTATION
1

122L

2L
23T

3Y
3T

2L

1

2

2L

S2

THICKNESS

MOUNTING

Reference
page 2
Ordering matrix

1 Single arm mount

2L

3T

3Y

3T

4

DRILL PATTERN
S2 #2

2 bolt 3.5”
pattern

2 Two fixtures at 180˚
2L Two fixtures at 90˚
4 Four fixtures at 90˚
TA Tenon (2.38” OD

POLE TOP
3.875

.875
3.5

x 4” Tall)

4

Denotes handhole location

TB Tenon (2.88” OD
x 4” Tall)

TC Tenon (3.5” OD

DB
FINISH

OPTIONS
HSC Internal Coating

BL
WH
GR
PS

GFI2 20 Amp GFCI

Textured

Black Textured
White Textured
Gray Textured
Platinum Silver
Smooth

CC Custom Color
Ø .875
HOLE

23Y3T

3T4
3Y

4
Denotes
handhole location
ACCESSORIES- Order Separately
Catalog Number
Description
3Y
3Y 4
4 mode vibration damper
1st
VM13
DenotesDenotes
handhole
locationlocation
handhole
VM2SXX
2nd mode vibration damper

Ø .563
3 HOLES

#2 DRILL PATTERN

TR1 Removable Tenon
(2.375 x 4.25)

OT Open Top (includes
pole cap)
1
2
3

UL

DB Dark Bronze

x 6” Tall)

2

Engineering of
footing by others

Reference page 2 for available configurations

3T Three fixtures at 90˚

1

Anchor Bolt
Hex Nut

Flat Washer

Anchor Base Detail

180°

(RTA Group 1 &
RTS Group 2)

Anchor Bolt
Location in
Relation
to Shaft
Rotation

Relation
to Shaft
Rotation

0°-Handhole

Bolt Square

(All excluding RTA Group 1
& RTS Group 2)

and Tapered Poles

Bolt Circle

270°
Arm 1

Bolt Square

As viewed
from top
of pole.

90°
Arm 2

Bolt Slots/Holes

Bolt Circle
90°
Arm 2

Bolt Circle

270°
Arm 1

(Hubbell Seal)

Receptacle and
Cover

EHH2 Extra Handhole
C052 .5” Coupling
C072 .75” Coupling
C202 2” Coupling
MPB2 Mid-pole Luminaire
Bracket

VM2 2nd mode vibration damper

LAB Less Anchor Bolts
UL UL Certified

Removable tenon used in conjunction with side arm mounting. First specify desired arm
configuration followed by the “TR” notation. Example: SSS-H-25-40-A-1-S2-TR-DB
Specify option location using logic found on page 2 (Option Orientation)
VM1 recommended on poles 20’ and taller with EPA of less than 1.

Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000

Denotes
handhole
location
Denotes
handhole
location Due to our continued efforts to improve our products, product specifications are subject to change without notice.

© 2015 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SSS-H POLES-SPEC 6/17

ORDERING INFORMATION Cont.
Feet

Nominal
Shaft Dimensions

Meters

Wall
Thickness

Bolt Circle
(range)

Bolt Square
(range)

Base Plate
Square

Anchor bolt size

Bolt Projection

Pole weight

SSS-H-10-40-A-XX-XX

10

3.0

4” square

0.125”

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

77

12

3.7

4” square

0.125”

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

90

SSS-H-14-40-A-XX-XX

14

4.3

4” square

0.125”

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

103

SSS-H-16-40-A-XX-XX

16

4.9

4” square

0.125”

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

116

SSS-H-18-40-A-XX-XX

18

5.5

4” square

0.125”

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

129

SSS-H-20-40-A-XX-XX

20

6.1

4” square

0.125”

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

142

9”

8” - 10”

5.66” - 7.07”

9”

3/4” x 30” x 3”

3.5

175

11”

10” - 12”

7.07” - 8.48”

SSS-H-25-40-A-XX-XX
7.6
Anchor25Base Detail

4” square

SSS-H-14-40-B-XX-XX

14

4.3

4” square

.188”

SSS-H-16-40-B-XX-XX

16

4.9

4” square

180°
.188”

5.5

Bolt Slots/Holes

4” square

.188”

4” square

.188”
As viewed

0.125”
Anchor
Base Detail

11”
Bolt
Slots/Holes

10.50”

3/4” x 30” x 3”

3.5

152

7.07” -Bolt
8.48”
Slots/Holes10.50”

3/4” x 30” x 3”

3.5

171

7.07” - 8.48”

10.50”

3/4” x 30” x 3”

3.5

190

7.07” - 8.48”

10.50”

3/4” x 30” x 3”

3.5

209

1
Circle 7.07”Arm
- 8.48”

10.50”

3/4” x 30” x 3”

3.5

257

7.07” - 8.48”

10.50”

3/4” x 30” x 3”

3.5

304

180°

10” - 12”

SSS-H-18-40-B-XX-XX

18180°

SSS-H-20-40-B-XX-XX

20

6.1

SSS-H-25-40-B-XX-XX

25

7.6

Bolt 4”
Circle
square Arm 2

SSS-H-30-40-B-XX-XX

30 viewed
As
from top
of pole.

9.1

4” square

SSS-H-16-50-B-XX-XX

16

4.9

11”

Bolt Square7.25” - 9.37”
10.25” - 13.25”

11.50”

1” x 36” x 4”

4.5

219

SSS-H-18-50-B-XX-XX

18

5.5

5” square

.188”

11”

10.25” - 13.25”

7.25” - 9.37”

11.50”

1” x 36” x 4”

4.5

243

SSS-H-20-50-B-XX-XX

20

6.1

5” square

.188”

11”

10.25” - 13.25”

7.25” - 9.37”

11.50”

1” x 36” x 4”

4.5

267

SSS-H-25-50-B-XX-XX

25

7.6

0°-Handhole
5” square

.188”

11”

0°-Handhole
10.25”
- 13.25”
7.25” - 9.37”

11.50”

1” x 36” x 4”

4.5

327

9.1

5” square

.188”

11”

10.25” - 13.25”

11.50”

1” x 36” x 4”

4.5

387

Bolt Square

Anchor Base
SSS-H-30-50-B-XX-XX
30Detail

SSS-H-25-50-C-XX-XX

180°

SSS-H-30-50-C-XX-XX

25

7.6

As viewed
from top
of pole.

270° 6.1
Arm 1

90°
6”
square
Arm
2

SSS-H-25-60-B-XX-XX

25

7.6

6” square

SSS-H-30-60-B-XX-XX
Bolt Slots/Holes

30

Anchor Base Detail

Bolt Circle
SSS-H-40-60-B-XX-XX

180°
9.1
0°-Handhole

10.7

40

As viewed
from
9.1 top
of pole.

90° 30
180°
SSS-H-30-60-C-XX-XX
Bolt Slots/Holes
Arm 2

As viewed
SSS-H-40-60-C-XX-XX
from top

90°
Arm 2

.25”

11”

of pole.

0°-Handhole

7.25” - 9.37”

10.25” - 13.25”

7.25” - 9.37”

11.50”

1” x 36” x 4”

4.5

427

11”

10.25” - 13.25”

7.25” - 9.37”

11.50”

1” x 36” x 4”

4.5

507

.188”270°
Arm 1

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

329

.188”

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

404

Bolt Slots/Holes

.25”

12.2

.188”
Slots/Holes

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

479

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

554

Bolt
6” square

Circle.188”

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

629
614

0°-Handhole
Bolt Square.188”

270°
Arm 1

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

6” squareBolt Circle

.25”

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

712

6” square

.25”

12”

11.00” - 13.25”

7.81” - 9.37”

12.25”

1-1/4” x 42” x 6”

5.0

809

As viewed
from top
of pole.

90°
Arm 2

As viewed
from top
of pole.

180° 6” square
Bolt Slots/Holes.25”

10.7

40

270°
Arm 1

270°
Arm 1

270°

6” square
Bolt
6” square

12.2

SSS-H-35-60-C-XX-XX
Bolt Circle 35

10” - 12”

from top
of pole.

Bolt Square

As viewed
from top
of pole.

Bolt Circle

20

SSS-H-35-60-B-XX-XX Bolt Square
35

90°
Arm
10”2-Bolt
12”

0°-Handhole

Bolt
Square
.188”

180°

10” - 12”

11”
As viewed

90°
Arm 2

5” square

Bolt Slots/Holes Bolt Circle

270°
Arm11”
1

.188”

5” square

10” - 12”

11”

from top

5” square

9.1

11” 180°

Bolt Circle

of pole.
.188”

270°
Arm 1

Bolt Slots/Holes

30

90°

Bolt Circle
90°
SSS-H-20-60-B-XX-XX
Arm 2

270°
Arm 1

Bolt Circle
(suggested)

SSS-H-12-40-A-XX-XX

90°
Arm 2

Detail

e

Height

Catalog Number

270°
Arm 1

NOTE Factory supplied template must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts.

0°-Handhole
Bolt Square

0°-Handhole

Bolt Square

0°-Handhole

Bolt Square

0°-Handhole

EHH - EXTRA C05 - C07 - C20 HANDHOLE
COUPLING

VM1 - VIBRATION DAMPER
1ST MODE

VM2 - VIBRATION DAMPER
2ND MODE

BASE COVER

VM2SXX - VIBRATION DAMPER
2ND MODE
BASE COVER

VM1
2” -11.5 NPSM Threads
3/4” - 14 NPSM Threads

Pole

Overall
Height 10'-30'

1/2” - 14 NPSM Threads

Overall
Height 10'-30'

Provision for Grounding

18"

GFI – 20 AMP GFCI
RECEPTACLE & COVER

Field Installed Pole Top damper designed
to reduce pole top deflection or sway. VM1
is recommended for pole systems 25’ and
taller with a total EPA of 1.0 or less.

VIBRATION
DAMPER
Factory installed,
internal
damper designed
2ND MODE
to alter pole resonance
to reduce movement
and material fatigue caused by 2nd mode
vibration.

BASE COVER

Standard hand Bolt Square (Outer)
hole frame
0˚

Overall

10'-30'
AttachmentHeight
stub
5” long
welded to pole

Bolt Square (Inner)

Handhole
Adapter plate
Gasket

Bolt Circle (Outer)
90˚

20 AMP GFCI 270˚

Height of option in feet

Square Steel Pole

2” pipe tenon
4.25” tall

Field installed, internal damper designed to
alter pole resonance to reduce movement
and material fatigue caused by 2nd mode
vibration.

OPTION ORIENTATION

MPB - MID POLE BRACKET
Square Steel Pole

VM2S08 – 8'
VM2S12 – 12'
VM2S16 – 16'
VM2S20 – 20'
VM2S24 – 24'

Follow the logic below
when ordering location specific
18"
options. For each option, include its orientation (in degrees)
and its height (in feet). Example: Option C07 should be
ordered as: SSS-H-20-40-A-TA-DB-CO7-0-15
(.5” coupling on the handhole/arm side of pole, 15 feet up
from
the pole base) 1’ spacing required between option.
VIBRATION
DAMPER
2ND
MODE
Consult
factory for other configurations.
Bolt Square (Outer)

18"

Bolt Circle (Inner)

Wet Locations
In-use Cover

180˚

TENON

Height of option in feet

0˚

Bolt Square (Inner)

Handhole

Bolt Circle (Outer)

Bolt Square (Outer)
Square (Inner)
Arm, 3”0˚ Sq. Bolt
x 13.5”
long
ships separately
Bolt Circle (Outer)

90˚

270˚

Handhole

Bolt Circle (Inner)

90˚

270˚

180˚

Bolt Circle (Inner)

TENON
For more information about pole vibration and vibration dampers, please consult http://cdn.hubbelloutdoor.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
180˚

TENON

Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2015 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SSS-H POLES-SPEC 6/17

ASCE7-05

WIND MAP								

FLORIDA REGION WIND MAP

130
90
100
110
120

85

120

140

115

115

150

130
120

130

130

90

90

Wind Map

150

140

140

150
140

United States and Canada

160
150
140

Special Wind Region

(Consult Local Authorities)

140

150
140
90
140
100
130
110 120

HAWAII – 105 mph
PUERTO RICO – 145 mph

150

170

160
170

• Florida region wind map above is
based upon 3-second gust winds and
the 2014 Florida Building Code

180
180

ALASKA REGION WIND MAP
120

110
100

90
NOTES:
130
• The Wind Map is intended only as a general guide. Always
• Values are based on 50 year mean recurrence interval 30’
consult local authorities to determine maximum wind
above grade.
velocities, gusting and unique wind conditions for each
• Hawaii has an 105 mph wind velocity.
specific application.
• Puerto Rico has a 125 mph wind velocity.
• CAUTION: Wind speeds and listed EPAs are for ground
• Caution must be exercised in determining wind velocities
90
mounted installations. Poles mounted on structures (such
in special wind areas such as:
as
bridges
and
buildings)
must
consider
vibration
and
Mountainous Regions
coefficient of height factors beyond this general guide.
130
Areas surrounding the Great Lakes or other large bodies
Consult AASHTO standards.
100
of water or open land.
• Extreme Wind Events: Hurricanes, Typhoons, Cyclones, or
Areas subject to extreme wind conditions, such as
110
Tornadoes expose poles to flying debris, wind shear, and
hurricanes, typhoons, cyclones, and tornadoes.
other unpredictable aerodynamic 130
forces not indicated by
120
the wind velocity ratings.
Areas adjacent to
airports.
ASCE 7-05 wind map EPA Load Rating - 3 second gust wind speeds
130
• Pole Strength Limited Warranty: Standard, unmodified Kim
Any specific area with a known
or all
suspected
abnormally
(Use for
locations except
Florida)
lighting Poles installed as recommended, undamaged by
high intermittent wind condition caused by geography,
Catalog
Number
85
90
100
105
110
120
130
140 or145
Florida
Building Code 2014 EPA Load Rating - 3 second gust wind speeds
corrosion,
lack of150
maintenance, shall withstand
steady
adjacent structures, or other specific local conditions
(Use for Florida only)
SSS-H-10-40-A
25.0
25.0
25.0
22.8
20.6
17.0
14.2
11.0 as 10.1
wind11.9
conditions
provided on page 2 (Allowable Pole
that may not be recorded in National Weather Service
Installation
poles without luminaires,
attachment
records.
Catalogor
Number
115
120
130
140
150
160
170
SSS-H-12-40-A
25.0
25.0
20.0
18.0
16.1
13.2
10.8EPA).8.9
8.1 of 7.4
of any unauthorized accessories to polesSSS-H-10-40-A
shall void this 25.0
must
• Allowable
pole EPA23.1
for jobsite
25.0
25.0
25.0
21.4
18.4
15.9
SSS-H-14-40-A
20.4 wind
16.1conditions
14.3
12.8 be10.2
8.2
6.6
5.9
5.3
warranty.
equal
to or greater than fixture EPA. Responsibility lies with
SSS-H-12-40-A
25.0
25.0
23.6
19.8
16.7
14.2
12.1
SSS-H-16-40-A
19.0
16.7
13.0
11.5
10.1
7.9
6.2
4.7
4.1
3.6
the specifier for correct pole selection based on AASHTO
SSS-H-14-40-A
25.0
23.1
19.0
15.7
13.1
10.9
99.1
SSS-H-18-40-A
15.6
13.6
10.0
9.0
7.8
5.9
4.4
3.1
2.6
2.1
wind map and job location.

180
13.9
10.4
7.6

SSS-H-20-40-A

12.7

10.9

7.9

6.9

5.9

4.2

2.8

1.7

1.3

0.9

SSS-H-16-40-A

20.8

18.7

15.2

12.3

10.1

8.2

6.7

5.4

SSS-H-25-40-A

7.3

5.9

3.8

2.9

2.1

0.8

NR

NR

NR

NR

SSS-H-18-40-A

16.8

15.0

11.9

9.4

7.5

5.9

4.5

3.4

SSS-H-20-40-A

13.6

11.9

9.2

7.1

5.3

3.9

2.7

1.7

SSS-H-25-40-A

7.4

6.2

4.1

2.5

1.1

NR

NR

NR

SSS-H-14-40-B

25.0

25.0

23.3

20.8

18.6

15.1

12.3

10.2

9.2

8.4

SSS-H-16-40-B

25.0

24.9

19.4

17.3

15.4

12.3

9.9

8.0

7.2

6.4

SSS-H-18-40-B

24.0

20.8

16.1

14.2

12.5

9.8

7.7

6.1

5.3

4.7

SSS-H-14-40-B

25.0

23.6

19.4

16.1

13.4

11.2

9.4

7.8

SSS-H-20-40-B

20.2

17.5

13.2

11.6

10.1

7.7

5.9

4.4

3.8

3.2

SSS-H-16-40-B

21.4

19.2

15.6

12.7

10.4

8.5

6.9

5.6

SSS-H-25-40-B

12.8

11.0

7.9

6.7

5.5

3.7

2.3

1.2

0.7

NR

SSS-H-18-40-B

17.2

15.4

12.2

9.7

7.7

6.1

4.7

3.6

SSS-H-30-40-B

8.0

6.6

4.1

3.1

2.2

0.8

NR

NR

NR

NR

SSS-H-20-40-B

13.9

12.3

9.5

7.3

5.5

4.1

2.9

1.9

SSS-H-25-40-B

7.7

6.4

4.3

2.6

1.3

NR

NR

NR

SSS-H-30-40-B

3.2

2.1

NR

NR

NR

NR

NR

NR

SSS-H-16-50-B

25.0

25.0

25.0

25.0

24.8

20.1

16.5

13.6

12.3

11.2

SSS-H-18-50-B

25.0

25.0

25.0

22.9

20.4

16.4

13.2

10.7

9.6

8.6

SSS-H-20-50-B

25.0

25.0

21.3

18.9

16.7

13.2

10.4

8.1

7.2

6.3

SSS-H-16-50-B

25.0

25.0

25.0

25.0

25.0

21.4

18.2

15.5

SSS-H-25-50-B

20.7

17.8

13.3

11.5

9.8

7.2

5.0

3.3

2.6

1.9

SSS-H-18-50-B

25.0

25.0

25.0

24.4

20.4

17.0

14.2

11.9

SSS-H-30-50-B

13.5

11.3

7.7

6.2

4.9

2.8

1.1

NR

NR

NR

SSS-H-20-50-B

25.0

25.0

24.4

19.9

1 6.3

13.4

11.0

8.9

SSS-H-25-50-B

21.8

19.3

15.0

11.5

8.8

6.5

4.7

3.1

SSS-H-25-50-C

25.0

25.0

19.4

17.1

15.1

11.7

9.0

6.9

6.0

5.1

SSS-H-30-50-B

13.7

11.7

8.2

5.5

3.3

1.5

NR

NR

SSS-H-30-50-C

20.1

17.3

12.7

10.9

9.3

6.6

4.5

2.8

2.1

1.4

SSS-H-25-50-C

21.8

19.3

15.0

11.5

8.8

6.5

4.7

3.1

SSS-H-30-50-C

13.7

11.7

8.2

5.5

3.3

1.5

NR

NR

SSS-H-20-60-B

25.0

25.0

25.0

25.0

25.0

20.2

16.1

12.9

11.5

10.3

SSS-H-25-60-B

25.0

25.0

20.6

18.0

15.6

11.8

8.7

6.2

5.2

4.2

SSS-H-20-60-B

25.0

25.0

25.0

21.9

17.8

14.5

11.7

9.4

SSS-H-30-60-B

21.4

18.1

12.9

10.7

8.8

5.7

3.3

1.3

NR

NR

SSS-H-25-60-B

23.8

20.9

16.1

12.3

9.2

6.6

4.5

2.8

SSS-H-35-60-B

14.0

11.3

6.9

5.2

3.6

1.0

NR

NR

NR

NR

SSS-H-30-60-B

14.6

12.3

8.4

5.3

2.8

0.8

NR

NR

SSS-H-40-60-B

8.1

5.8

2.2

nr

NR

NR

NR

NR

NR

NR

SSS-H-35-60-B

7.5

5.6

2.4

NR

NR

NR

NR

NR

SSS-H-40-60-B

1.8

NR

NR

NR

NR

NR

NR

NR

SSS-H-30-60-C

24.3

20.5

14.6

12.2

10.2

6.8

4.2

2.2

1.3

0.5

SSS-H-30-60-C

14.6

12.3

8.4

5.3

2.8

0.8

NR

NR

SSS-H-35-60-C

16.6

13.5

8.6

6.6

4.9

2.1

NR

NR

NR

NR

SSS-H-35-60-C

7.5

5.6

2.4

NR

NR

NR

NR

NR

SSS-H-40-60-C

10.6

7.9

3.7

2.1

0.6

NR

NR

NR

NR

NR

SSS-H-40-60-C

1.8

NR

NR

NR

NR

NR

NR

NR

Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2015 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SSS-H POLES-SPEC 6/17

NOTES
• Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs.
• The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and 		
cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application
• Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for 		
correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty
• Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this 		
general guide; Consult local and federal standards
• Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration 		
Application Guide for environmental risk factors and design considerations. http://cdn.hubbelloutdoor.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf
• Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2015 HUBBELL OUTDOOR LIGHTING, All Rights Reserved • For more information visit our website: www.hubbelloutdoor.com • Printed in USA SSS-H POLES-SPEC 6/17