TN 812 Tait Orca 5030, 5035, 5040 Firmware Upgrade To 4.22. TECHNOTE/T5000/TN 812_Tait
User Manual: Pdf TECHNOTE/T5000/TN-812_Tait Orca 5030, 5035, 5040 Firmware Upgrade
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Technical Note TN-812 Tait Orca 5030, 5035 & 5040 Firmware Upgrade to 4.22 17 October 2003 Applicability This Technical Note applies to the firmware utilised in Tait Orca 5030, 5035 and 5040 MPT1327 Trunked radios. 1. Introduction What is in this Technical Note? The Orca Trunked Firmware v4.22 has been released to manufacturing to replace the current Firmware (v4.21) being installed in Tait Orca 5030, 5035 and 5040 Trunked products. Version 4.22 Firmware was first implemented in an Orca TOP-H2620-B0, radio serial number 14219700, job 103007387, and date 21 October 2003. This Firmware is compatible only with Tait Orca Trunked Programming Application TOP-TPA v3.8.0 or later. What does it work with? TN-812 The TOP-TPA v3.8.0 is available on the Tait Programming Utilities TPU v3.8.1 CD-ROM, or available for download from support.taitworld.com. Page 1 of 2 Tait Electronics Limited PO Box 1645, Christchurch, New Zealand support.taitworld.com 17 October 2003 Telephone: +64–3–358–3399 Facsimile: +64–3–358–3903 2. Changes What has been resolved in this release? The Firmware version 4.22 resolves the following issues in the Tait Orca 5030, 5035 and 5040: • • • Altered radio functionality slightly so that when a radio initiates a call from a function key, it no longer stores this call string as the last string sent. This change mainly affects the Tait Orca 5030 radio. This change was made to alleviate an issue where a user had an emergency (*9*) call defined as a function key call. Once the emergency call had been cleared, a press of the PTT would result in the last call being setup again. Thus another emergency call was setup. This no longer occurs; instead a press of the PTT will call the preset selected on the 16-way selector. This brings the Tait Orca 5030 functionality into line with the 5035 and 5040. (Raised as TIMS 21920). When the radio switches networks, and revalidation on power-up is enabled, the radio will revalidate to the new network. (Raised as TIMS 22032). System Error 52 (Invalid Menu Item) no longer occurs when PTT pressed in response to unanswered call (However it will still occur under certain error mode conditions). (Raised as TIMS 21857). Compliance Issues None, unless a specific Firmware version is required by a network provider. CSO Instruction CSO’s – Please inform all logistics, sales and technical staff of these changes 3. Issuing Authority Name and Position of Issuing Officer Tim Lummis Technical Support Engineer Confidentiality Confidential – This message or document contains proprietary information intended only for the person(s) or organisation(s) to whom it is addressed. All Recipients are legally obliged to not disclose Tait technological or business information to any persons or organisations without the written permission of Tait. Distribution Level Tait Only Document History TN-812 Original Release Updated to include first S/N Page 2 of 2 Tait Electronics Limited PO Box 1645, Christchurch, New Zealand support.taitworld.com 17 October 2003 22 October 2003 TPL TPL 17 October 2003 Telephone: +64–3–358–3399 Facsimile: +64–3–358–3903
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2003:10:22 13:23:38+13:00 Modify Date : 2003:10:22 13:23:38+13:00 Page Count : 2 Creation Date : 2003:10:22 00:23:38Z Mod Date : 2003:10:22 00:23:38Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : lummist Metadata Date : 2003:10:22 00:23:38Z Creator : lummist Title : Microsoft Word - TN-812 Tait Orca 5030, 5035, 5040 Firmware Upgrade to 4.22.EXIF Metadata provided by EXIF.tools