Traverse LED Spec Sheet

: Pdf Traverse Led Spec Sheet Traverse_LED_spec_sheet spec products beacon

Open the PDF directly: View PDF .
Page Count: 4

CERTIFICATIONS/LISTINGS

DIMENSIONS

PRODUCT IMAGE(S)SPECIFICATIONS

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

© 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA TRV-SPEC 11/16

Cat.#

Approvals

Job Type design . performance . technology

design . performance . technology

TRAVERSE

SERIES

SURFACE/CEILING/GARAGE

Intended Use:

The Traverse luminaire is a wall surface

mounted luminaire with a eld replaceable LED

light engine & optical bezel system. Internal

components are totally enclosed in rain-tight

and corrosion-resistant die cast aluminum

housing. The TRV Luminaire is suitable for wet

locations.

Construction:

• Traverse luminaire consists of a die cast

aluminum two-piece housing.

• Die cast main (thermal) housing provides

direct heat exchange between the LED light

engine and the cool outdoor air by drawing

heat through integral heat channels and out

to the sculptured and functional luminaire

surface.

• LED drivers are thermally isolated from the

main housing, mechanically attached and

heat sinked to the rear housing.

• Main housing is designed with heat dissipat

ing ns for LED thermal management without

the use of metallic screens, cages, or fans.

• Shape of the main housing is designed to

prevent debris accumulation and as a bird

nesting deterrent. The back and

main housings are designed to hinge open

for easy mounting and easy access.

LED/Optics:

• Optical one piece cartridge system

consisting of an LED engine, LED lamps,

optics, gasket and stainless steel bezel.

• Cartridge is held together with internal brass

standos soldered to the board so that it

can be eld replaced as a one piece optical

system.

• A two-piece die cut silicone and polycarbon

ate foam gasket ensures a weather-proof

seal around each individual LED and allows

the Traverse luminaire to be rated for

high-pressure hose down applications.

• Optical cartridge is secured to the extruded

housing with fasteners and a heat pad to

ensure thermal conductivity.

• Optics are held in place without the use of

adhesives and the complete assembly is

gasketed for high pressure hose

down cleaning.

• Cartridge assembly is available in various

lighting distributions using TIR designed

acrylic optical lenses over each LED.

Electrical:

• 100V through 277V, 50 Hz to 60 Hz (UNV).

• Power factor is min 0.92 at full load.

• All electrical components are rated at 50,000

hours at full load and 40°C ambient

conditions per MIL-217F Notice 2.

• Optional 0 to 10 volt dimming drivers are

available upon request.

• Component-to-component wiring within the

luminaire may carry no more than 80% of

rated load and is listed by UL for use at

600VAC at 50°C or higher.

• Plug disconnects are listed by UL for use at

600 VAC, 15A or higher. 15A rating applies

to primary (AC) side only.

• Surge protection - 20KA

Controls/Options:

• Traverse is available with an optional passive

infrared (PIR) motion sensor capable of

detecting motion 360° around the

luminaire. When no motion is detected

for the specied time, the Motion Response

system reduces the wattage down

to a factory preset level, reducing light level

accordingly. When motion is detected,

the luminaire returns to full wattage and

full light output. Please contact Beacon

Products if project requirements vary

from the standard congurations

• Available with Energeni for optional set

dimming with simple delay, or timed dimming

based on time of night

(see Energeni product page for more details

www.beaconproducts.com/products/energeni

• In addition, Traverse can be specied with

SiteSync™ wireless control system

for reduction in energy and maintenance cost

while optimizing light quality 24/7. See

ordering information or visit:

www.hubbelllighting.com/sitesync/

for more details

Installation:

• Rear housing (back plate) is designed with

various bolt patterns for direct wall mounting

or mounting to a recessed 4” junction box.

• Rear housing has three integral 3/4” NPT

power feed locations (bottom and

each side) for surface mounted conduit

applications.

• After mounting the rear housing to the wall or

junction box, the main housing is designed to

hang and hinge closed after connecting the

male and female quick connectors.

• Mounting design permits a simple retrot

to existing wall luminaires that utilize surface

mount or recessed junction boxes.

Finish:

• IFS polyester powder-coat electro-

statically applied and thermocured.

• IFS nish consists of a ve stage

iron phosphate chemical pretreatment

regimen with a polymer primer sealer,

oven dry o, and top coated with

a thermoset super TGIC polyester

powder coat nish.

• The nish meets the AAMA 605.2 perfor

mance specication which includes

passing a 3000 hour salt spray test for

corrosion resistance and resists cracking or

loss of adhesion per ASTM D522

and resists surface impacts of up to 160

inch-pounds.

Listings:

• The luminaire shall bear a CSA label and be

marked suitable for wet locations (standard).

• This product is approved by the Florida Fish

and Wildlife Conservation Commission.

Separate spec available at:

http://www.beaconproducts.com/products/traverse

Warranty:

Five year limited warranty for more information visit:

www.hubbelllighting.com/resources/warranty

Bottom View

Top View

Front View

Side View

14”

12 1/2”

7 1/4”

*3000K and warmer CCTs only

Shown with SiteSync™

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

© 2015 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA TRV-SPEC 11/16

design . performance . technology

ORDERING INFORMATION

SERIES

TRV-D Traverse Down

Light

TRV-U1Traverse Up

Light (lens req.)

OPTICS

T2 Type II

T3 Type III

T4 Type IV

T5R Type V, rectan-

gular

2X2 Narrow spot

flood

5X5 Medium flood

VOLTAGE

UNV 120-277V

347 347V

480 480V

FINISH

BBT basic black textured

BMT black matte textured

WHT white textured

MBT metallic bronze textured

BZT bronze textured

DBT dark bronze textured

GYS gray smooth

DPS dark platinum smooth

GNT green textured

MST metallic silver textured

MTT metallic titanium textured

OWI old world iron

RAL _____________

CONTROL OPTIONS

GENI-XX6Energeni

SWP7,8 SiteSync Wire-

less Pre-Com-

mission

SWPM7,8,9 SiteSync Wire-

less Pre-Com-

mission w/

Occupancy

Sensor

LED COLOR11

3K 3000K

4K 4000K

5K 5000K

ENGINE-WATTS

24NB-27 27 Watts - LED

array

24NB-55 55 Watts - LED

array

36NB-80 80 Watts - LED

array

48NB-110 110 Watts - LED

array

60NB-136 136 Watts - LED

array

ELECTRICAL OPTIONS

PEC Photocell, button

2PF2,3, 10 Dual power feed

BPC4Cold weather battery

pack

1 Indoor use only

2 Not available on 24NB-27

3 Not available @ 347V or 480V input

4 36NB-80 only, not available with SWP or SWPM control options

5 Not available on 48NB-110 or 60NB-136

6 When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure and

instructions for setting table and options. Not available with sensor options.

7 Not available with other control or sensor options. PEC is available with MOB and OCS.

8 Specify group and zone. See SiteSync product page www.hubbelllighting.com/controls/sitesync for more details.

9 Specify time delay; dimming level and mounting height.

10 Not available with SWP or SWPM control options.

11 This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available at:

http://cdn.beaconproducts.com/content/products/specs/specs_files/Traverse_LED_turtle_spec_sheet.pdf

ORDERING EXAMPLE: TRV-D/60NB-136/5K/T5R/UNV/GENIXX/PEC/BBT

SENSOR OPTIONS

MOB3,5,7,9 Occupancy Sensor

(33% or 50%

dimming)

SiteSync Lighting Control is available from

our most popular brands in a broad range of

award-winning product families.

PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting

control option, additional information will be required to complete the order. The SiteSync Commissioning Form

or alternate schedule information must be completed. This form includes Project location, Group information, and

Operating schedules. For more detailed information please visit www.hubbelllighting.com/products/sitesync/ or

contact Hubbell Lighting tech support at (800) 345-4928.

SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens.

Examples: TRV/24NB-55/5K/T3/UNV/SWP/DBT SiteSync only

TRV/24NB-55/5K/T3/UNV/SWPM-20F/DBT SiteSync with Occupancy Sensor

MOB ORDERING INFORMATION: When ordering a fixture with a dimming occupancy sensor option (MOB), please

specify the appropriate information. These settings are specified in the ordering as shown in the example below.

TRV/24NB-55/5K/T3/UNV/MOB - __________ - __________ - _____ / DBT

1 to 30 min.33% or 50% ??

High to Dim Delay Low Level Mounting Height (ft.)

Catalog Number Description

SWUSB* SiteSync loaded on USB flash drive (Windows based only)

SWTAB* SiteSync Windows Tablet

SWBRG+SiteSync Wireless Bridge Node

* When ordering with SiteSync, one of the following interface options must be chosen and ordered

separately. Each option contains the SiteSync License, GUI and Bridge Node.

+ If needed, an additional Bridge Node can be ordered.

Accessories and Services (Ordered Separately)

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

© 2015 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA TRV-SPEC 11/16

design . performance . technology

5K

(5000K nominal, 70 CRI)

4K

(4000K nominal, 70 CRI)

3K

(3000K nominal, 80 CRI)

# LED’S

DRIVE

CURRENT

(MILLIAMPS)

SYSTEM

WATTS

DISTRIBUTION

TYPE

LUMENS

LPW

1

B

U

G

LUMENS

LPW

1

B

U

G

LUMENS

LPW

1

B

U

G

24 350mA 27w

T2 2833 105 1 0 1 2805 104 1 0 1 2408 89 1 0 1

T3 2805 104 1 0 1 2777 103 1 0 1 2392 89 1 0 1

T4

3086

114

1

0

1

3055

113

1

0

1

2623

97

1

0

1

T5R

3142

116

2

0

2

3111

115

2

0

2

2670

99

2

0

2

5X5 3031 112 2 0 1 3001 111 2 0 1 2577 95 2 0 1

2X2 3287 122 3 0 1 3254 121 3 0 1 2794 103 3 0 1

24 700mA 55w

T2 5666 102 2 0 2 5610 101 2 0 2 4816 86 1 0 2

T3

5610

101

1

0

2

5554

100

1

0

2

4784

86

1

0

2

T4

6171

111

1

0

2

6110

109

1

0

2

5245

94

1

0

2

T5R 6283 113 3 0 3 6221 111 3 0 3 5341 96 3 0 3

5X5 6063 110 3 0 1 6002 109 3 0 1 5153 94 3 0 1

2X2 6573 118 4 0 1 6508 117 4 0 1 5587 100 4 0 1

36 700mA 80w

T2

8505

101

2

0

3

8415

100

2

0

3

7224

87

2

0

2

T3

8415

100

2

0

2

8331

99

2

0

2

7175

86

2

0

2

T4 9256 110 1 0 3 9164 109 1 0 3 7868 94 1 0 3

T5R 9425 112 3 0 3 9331 111 3 0 3 8011 96 3 0 3

5X5 9094 109 4 0 1 9003 108 4 0 1 7730 93 3 0 1

2X2

9860

118

4

0

1

9762

116

4

0

1

8381

100

4

0

1

48 700mA 110w

T2

11332

102

3

0

3

11220

101

3

0

3

9633

87

2

0

3

T3 11220 101 2 0 3 11108 100 2 0 3 9567 86 2 0 3

T4 12342 111 2 0 3 12219 110 2 0 3 10491 95 2 0 3

T5R 12567 113 4 0 4 12441 112 4 0 4 10682 96 3 0 3

5X5

12126

109

4

0

1

12004

108

4

0

1

10307

93

4

0

1

2X2

13147

118

5

0

1

13016

117

5

0

1

11175

101

5

0

1

60 700mA 136w

T2 14165 103 3 0 3 14025 102 3 0 3 12041 88 3 0 3

T3 14025 102 3 0 3 13885 101 3 0 3 11959 87 3 0 3

T4 15427 113 2 0 3 15274 111 2 0 3 13114 96 2 0 3

T5R

15708

115

4

0

4

15259

111

4

0

4

13352

97

4

0

4

5X5

15157

111

4

0

1

15006

110

4

0

1

12884

94

4

0

1

2X2 16434 120 5 0 2 16269 119 5 0 2 13968 102 5 0 1

1Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be

representative of the configurations shown. Actual performance may differ as a result of end-user environment and application.

PERFORMANCE DATA

Type II

TRV-60NB-136-5K-T2

Type III

TRV-60NB-136-5K-T3

Type IV

TRV-60NB-136-5K-T4

PHOTOMETRICS

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

© 2015 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA July 18, 2017 2:42 PM

design . performance . technology

PROJECTED LUMEN MAINTENANCE

AMBIENT

TEMP.

0

25,000

50,000

1

TM-21-11

60,000

100,000

Calculated L70

(HOURS)

25°C / 77°F 1.00 0.97 0.96 0.95 0.93 >560,000

1 Projected per IESNA TM-21-11

Data references the extrapolated performance projections for the base model in a 40°C

ambient, based on 10,000 hours of LED testing per IESNA LM-80-08.

AMBIENT TEMPERATURE

LUMEN MULTIPLIER

0°C

32°F

1.02

10°C

50°F

1.01

20°C

68°F

1.00

25°C

77°F

1.00

30°C

86°F

1.00

40°C

104°F

0.99

50°C

122°F

0.98

Use these factors to determine relative lumen output for average ambient

temperatures from 0-50°C (32-122°F).

# OF LEDS

NUMBER

OF

DRIVERS

DRIVE

CURRENT

(mA)

INPUT VOLTAGE

(V)

OPER. CURRENT

(Amps)

SYSTEM POWER

(Watts)

24 1(350mA)

120

0.23

27.0

277

0.10

24 2(700mA)

120

0.46

55.0

277

0.20

36 1(700mA)

120

0.68

80.0

277

0.30

48 1(700mA)

120

0.92

110.0

277

0.40

60 1(700mA)

120

1.13

136.0

277

0.49

ELECTRICAL DATA