Vhc94 Asymmetric

2014-06-03

: Pdf Vhc94-Asymmetric vhc94-asymmetric spec products columbia

Open the PDF directly: View PDF PDF.
Page Count: 2

ConstruCtion
Luminaire housing and end caps are die formed
code gauge cold rolled steel. Louver and upper
reector surfaces are formed from low brightness
iridescent suppressive specular anodized aluminum.
Aluminum louver is secured in open or closed
position by four torsion spring latches.
Finish
White painted parts are treated with a ve stage
phosphate bonding process and nished after
fabrication with a minimum 90% reective gloss
baked enamel.
Air hAnDLinG
Standard luminaire is static. Air extract option
available to remove room air and cool lamps.
instALLAtion
An access plate is furnished with each luminaire
for fast wiring access from the plenum. No need to
open xture.
ELECtriCAL
Standard class “P”, thermally protected, auto-
resetting HPF ballast, sound rated A. All ballast
leads extend a minimum of 6" through access
location. NEC/CEC-compliant ballast disconnect is
standard.
CEiLinG CompAtibiLity
Luminaire is available to t most standard ceiling
types. NEC-compliant T-bar clips supplied with all
grid trim xtures. See ceiling details on reverse. For
continuous row mounting in hard ceilings use F trim
and either EOR (end of row) or INT (intermediate
mount) options. Contact your Columbia
representative for compatibility information for
specic ceiling types.
surFACE or pEnDAnt mount
Companion surface or pendant mount version (SM
ceiling type) matches performance and aesthetics of
recessed versions.
CErtiFiCAtion
All luminaires are built to UL 1598 standards and
bear appropriate UL and cUL or CSA labels. Damp
location labeling is standard. Emergency-equipped
xtures labeled UL 924.
ExamplE VHC94-132GT-lS113-S-EU-1ww
FEAturEs
Optional 15 cell louver meets IES standard RP-1 glare control •
on room side
Ideal for today’s computer intensive electronic oces•
Wide light distribution provides uniform illumination •
Unique optical system eliminates glare•
T8 Two lamp version features lamps stacked over/under•
Low iridescent anodized aluminum louver and reector•
White powder coat nish painted after fabrication•
Surface and pendant mount available•
Symmetric and double wall wash distribution companions •
available
orDErinG inFormAtion
BallaST
EElectronic T8,
Instant Start (Std.)
Ep Electronic T5,
Programmed Start
(std. T5/T5HO,
optional T8)
ED Electronic dimming
For dimming and other
specific ballast vendor
show as option
OpTiOnS
FO735 35K 75 CRI T8 Lamps
Installed
FO835 35K 80 CRI T8
Lamps Installed
F5835 35K 80 CRI T5
Lamps Installed
GlR Fast Blow Fuse
GmF Slow Blow Fuse
El Emergency Battery
Pack
mSEE Master/Satellite
End-to-End
– –
94 – –
DiSTRiBUTiOn
OpTiOnS
1ww Asymmetric
Wall Wash
lS 1– –
1ww
VHC
mODEl
VHC VDT
Parabolic
nO. OF lampS
1One
2Two
CEilinG TypE
GT Integral Cross Tee (Grid
ends lay into standard
T-bar, sides act as
integral cross tee to
support tile)
FOverlap Flange
GLay-in (GT is typically
recommended)
Sm Surface Mount (Static
only)
nO. CEllS
CROSSwiSE
1One
aiR FUnCTiOnS
SStatic
HHeat Extract Only
(No dampers)
VOlTaGE
U120V-277V
347 347V
nO. CEllS
lEnGTHwiSE
13 Thirteen
15 Fifteen (132 versions meet
IES RP-1 on room side)
SizE
94 9" × 4'
lamp TypE
28 4', T5: 28 Watt
32 4', T8: 32, 30,
28 or 25 Watt
54 4', T5HO: 54 or
51 Watt
T8 only uses over/
under lamp position
lOUVER FiniSH
lS Low Iridescent Specular
VhC94/pVhC94 AsymmEtriC
9" × 4' VDT Parabolic / 1 or 2-Lamp T5, T5HO, T8
PARABOLICS / VHC94/PVHC94 ASYMMETRICPage 1/2 Rev. 11/18/09
© 2009 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change
specications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Catalog No.
Project Name Type
Date
projECt inFormAtion
Test 10538 Test Date 6/10/03
Footcandle levels shown are initial for a single
xture. For data on specic room sizes, mounting
distances and oor reectance contact your
Columbia representative. Recommended mounting
distance from the wall is 36". A uniform wash will be
provided if the mounting distance from the wall is
between 12" and 48".
Zone Lumens % Lamp % Fixt.
0-30 622 21.8 33.7
0-40 1087 38.2 59.0
0-60 1746 61.3 94.7
0-90 1845 64.7 100.0
0-180 1845 64.7 100.0
Luminaire VHC94-132G-LS113-EB8-
1WW
VHC Parabolic
9" × 48" 1-Lamp with 1 × 13
Cell Specular Asymmetric
Louver
Ballast B232I120
Ballast Factor 1.15
Lamp FO32/741
Lumens per Lamp 2850
Watts 35
Shielding Angle N/A
inDoor CAnDELA pLot
EnErGy DAtA
Total Luminaire Eciency 64.7%
Luminaire Ecacy Rating (LER) 61
IESNA RP-1-1993 Compliance Non-compliant
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
$3.93 based on
3000 hrs. and
$0.08 per KWH
CAnDELA VALuEs
Candela/Sq. M.
0.0 22.5 45.0 67.5 90.0
Average Luminance Angle
0653 653 653 653 653
5655 610 580 557 554
10 648 565 557 609 627
15 629 534 633 738 763
20 604 535 720 823 846
25 571 563 771 874 906
30 532 588 792 913 944
35 484 599 791 887 858
40 430 580 750 760 721
45 368 534 643 687 649
50 295 463 511 595 549
55 152 335 398 463 440
60 846 250 363 380
65 3 6 96 289 368
70 2 3 67 208 287
75 1 1 14 83 114
80 11212 22
8500111
90 00000
90.0
Vertical Footcandles
Distance down
from ceiling
96"
84"
72"
60"
48"
42"
36"
30"
24"
18"
12"
6"4
16
7
8
10
15
19
22
25
29
28
24
54"17
36"
T8 VHC 1-Lamp
wALL iLLuminAnCE
Type F Type SG
Flange kit rough in dimensions for single unit only: 9⁄" × 48⁄"
CEiLinG CompAtibiLity
For tile, plaster or plasterboard type
ceilings. Overlapping extruded alu-
minum trim conceals edges of ceiling
opening.Wing hanger suspension
system included. For row mounting, row
information is required.
For ⁄" slot grid type ceilings. Louver
will be level with the ceiling plane.
Slot grid tees must be eld installed all
around the xture. For availability of
side anges, contact the factory.
For lay-in installation in exposed grid
ceilings. Maximum tee widths of 1" and
maximum tee heights of 1½" allowed.
For lay-in installation in grid ceilings.
Fixture mounts on exposed tees at
ends of xture. Self ange attached to
side supports tile, eliminating need for
intermediary tees. Designed for end
tees of 1" width.
Side End Side End
Side End Side End
Type G Type GT
notE: All dimensions are in inches; dimensions and specications are subject to
change without notice. Please consult factory or check sample for verication.
Recessed (Type G)
DimEnsionAL DAtA
(48½" E.O.R., 48⁄" Int.)
6⁄"
9½"
24½"
4½" 3½"
K.O. Dimensions
A - 2" Dia. K.O.
B - ⁄" Dia. K.O.
C - ⁄" Dia. K.O.
D - ⁄" Dia. K.O.
8⁄"
9½"
48"
49"
6¼"
49"
Surface
photomEtriC DAtA
LuminAirE DAtA ZonAL LumEn summAry
VhC94/pVhC94 AsymmEtriC
9" × 4' VDT Parabolic / 1 or 2-Lamp T5, T5HO, T8
PARABOLICS / VHC94/PVHC94 ASYMMETRICPage 2/2 Rev. 11/18/09
© 2009 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change
specications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com

Navigation menu