Viper Large LED Spec Sheet
2016-12-06
: Pdf Viper Large Led Spec Sheet Viper_Large_LED_spec_sheet spec products beacon
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
VIPER L Cat.# Type Job SERIES design . per formance . technology Approvals ENHANCED LARGE VIPER LUMINAIRE Intended Use: Controls/Options: The Beacon Viper luminaire is available in two sizes with a wide choice of different LED Wattage configurations and optical distributions designed to replace HID lighting up to 1000W MH or HPS. Luminaires are suitable for wet locations. • Available with an optional passive infrared (PIR) motion sensor capable of detecting motion 360° around the luminaire. When no motion is detected for the specified time, the Motion Response system reduces the Wattage to factory preset level, reducing the light level accordingly. When motion is detected by the PIR sensor, the luminaire returns to full Wattage and full light output. Please contact Beacon Products if project requirements vary from standard configuration. • Available with Energeni for optional set dimming, timed dimming with simple delay, ` or timed dimming based on time of night (see www.beaconproducts.com/products/energeni). Construction: • Manufactured with die cast aluminum. • Coated with a polyester finish that meets ASTM B117 corrosion test requirements and ASTM D522 cracking and loss of adhesion test requirements. • External hardware is corrosion resistant. • One piece optical cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel bezel. • Cartridge is held together with internal brass standoffs soldered to the board so that it can be field replaced as a one piece optical system. • Two-piece silicone and micro-cellular polyurethane foam gasket ensures a weather-proof seal around each individual LED. Electrical: • Mounting options for horizontal arm, vertical tenon or traditional arm mounting available. Mounting hardware included. Finish: • IFS polyester powder-coat electro- statically applied and thermocured. • IFS finish consists of a five stage pretreatment regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish. • The finish meets the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pounds. DIMENSIONS A B D Front Weight: D C A B 4.13” 25.0 lbs 14.25” 29.12” 24.19” (704 mm) (614 mm) (362 mm) (105 mm) (11.3 kg) Side View Listings: • DesignLights Consortium (DLC) qualified, consult DLC website for more details: http:// www.designlights.org/QPL • Listed to UL1598 and CSA22.2#250.0-24 for wet locations and 40°C ambient temperatures • 3G rated for ANSI C136.31 high vibration applications with SF2 mounting • IDA approved Back View RA Rectangular Arm Accepts 2 3/8” OD tenon, min 4” long. Side View Back View SF2 2-3/8” OD Slip Fitter 18 3/4” PK2 2-3/8” Adjustable Knuckle Warranty: Five year limited warranty for more information visit: www.hubbelllighting.com/resources/warranty 31 1/4” 6” WB Wall Bracket 2 3/8” 5 1/2” 1” CERTIFICATIONS/LISTINGS 2 3/8” 5” IK05 6” *3000K and warmer CCTs only Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology EPA 1.0 ft2 MOUNTING OPTIONS 6 5/8” • Luminaire accepts 100V through 277V, 50 Hz to 60 Hz (UNV) 347V or 480V input. • Power factor is ≥ .90 at full load. • All electrical components are rated at 50,000 hours at full load and 25°C ambient conditions per MIL- 217F Notice 2. • Dimming drivers are standard, but must contact factory to request wiring leads for purpose of external dimming controls. • Component-to-component wiring within the luminaire may carry no more than 80% of rated load and is certified by UL for use at 600VAC at 90°C or higher. • Plug disconnects are certified by UL for use at 600 VAC, 13A or higher. 13A rating applies to primary (AC) side only. • Fixture electrical compartment shall contain all LED driver components and shall be provided with a push-button terminal block for AC power connections. • Ambient operating temperature -40°C to 40°C • Optional 7-pin ANSI C136.41-2013 twist-lock photo control receptacle available. Compatible with ANSI C136.41 external wireless control devices. • Surge protection - 20KA. • Lifeshield™ Circuit - protects luminaire from excessive temperature. The device shall activate at a specific, factory-preset temperature, and progressively reduce power over a finite temperature range. Operation shall be smooth and undetectable to the eye. Thermal circuit is designed to “fail on”, allowing the luminaire to revert to full power in the event of an interruption of its power supply, or faulty wiring connection to the drivers. The device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). • In addition, Viper can be specified with SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www.hubbelllighting.com/sitesync for more details. Installation: PRODUCT IMAGE(S) C SPECIFICATIONS © 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA SPEC 11/16 ORDERING INFORMATION ORDERING EXAMPLE: VPL/96NB-280/5K/T4/UNV/PCR-TL/GENIXX/BLC/RA/BBT VPL ENGINE-WATTS SERIES VPL viper-large LED COLOR VOLTAGE 3K 3000K 4K 4000K 5K 5000K UNV 120-277V 64NB-135 135W, LED array 80NB-180 180W, LED array ELECTRICAL OPTIONS PCR-TL 7 pin 347V 347V twist lock receptacle with photo control PCR-SC 7 pin twist lock receptacle with shorting cap 2PF7 dual power feed PCRU 7 pin twist lock receptacle 480V 480V 80NB-235 235W, LED array 96NB-220 220W, LED array 96NB-280 280W, LED array 96NB-395 395W, LED array OPTICS4 LEFT RIGHT OPTICS4 T1 type I T1L type 1 left T2 type II T1R type 1 right T3 type III T2L type 2 left T4 type IV T2R type 2 right T5R type V, rectangular T3L type 3 left HOUSE SIDE SHIELD OPTIONS shield 90° HSS-180 house side shield 180° BLC3 backlight control Examples: VP-L/80NB-235/5K/T3/UNV/SWP/RA/DBT SiteSync only VP-L/80NB-235/5K/T3/UNV/SWPM-20F/RA/DBT SiteSync with Motion Control MDD ORDERING INFORMATION: When ordering a fixture with the motion detection option (MDD), please specify the appropriate information. These settings are specified in the ordering as shown in the example below. 33% or 50% - _____ 1 to 30 min. - __________ VP-L/80NB-235/5K/T3/UNV/MDD - __________ ?? / RA/DBT WHT white textured MBT metallic bronze textured BZT bronze textured DBT dark bronze detector textured GYS gray smooth BIRD DETERRENT BSP bird spike RA rectangular arm for round Pre-Commission or square pole mount. Round Pole Adapter included. Pre-Commission w/ Motion Detection DPS dark platinum smooth GNT green textured MST metallic silver textured MOUNTING OPTIONS SWPM2,5 SiteSync Wireless SiteSync fixtures with Motion control (SWPM) require the mounting height of the fixture for selection of the lens. textured MDD2,5 motion dimming SWP1,5 SiteSync Wireless PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.HubbellLighting.com/sitesync or contact Hubbell Lighting tech support at (800) 345-4928. BMT black matte SENSOR OPTIONS GENI-XX6 energeni T3R type 3 right medium T4L type 4 left T5W type V, round wide T4R type 4 right FR front row auto FRL front row left optic FRR front row right textured HSS-90 house side CONTROL OPTIONS T5QM type V, square FINISH BBT basic black MTT metallic titanium textured OWI old world iron RAL _____________ SF2 2 3/8” OD slip-fitter PK2 2 3/8” adjustable knuckle WB wall bracket (use with SF2 or PK2), SF2 standard Accessories and Services (Ordered Separately) Catalog Number Description SWUSB* SiteSync loaded on USB flash drive (Windows based only) SWTAB* SiteSync Windows Tablet SWBRG+ SiteSync Wireless Bridge Node * When ordering with SiteSync, one of the following interface options must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node. + If needed, an additional Bridge Node can be ordered. High to Dim Delay Low Level Mounting Height (ft.) Must specify group and zone information at time of order. See www.hubbelllighting.com/sitesync for further details Specify time delay; dimming level and mounting height. T4 optic only. 4 To rotate optics Left or right 90 degrees, specify L or R after the optical distribution example T4L. 5 Not available with other control or sensor options. 6 When ordering Energeni, specifiy the routine setting code (example GENI-04). See Energeni brochure and instructions for setting table and options. Not available with sensor options. 7 Not available for 347V or 480V input. 1 DesignLights Consortium qualified. Consult DLC website for more details: http://www.designlights.org/QPL 2 3 LEFT ROTATED OPTIC RIGHT ROTATED OPTIC SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA SPEC 11/16 PERFORMANCE DATA 5K (5000K nominal, 70 CRI) # LED’S DRIVE CURRENT (MILLIAMPS) SYSTEM WATTS 64 625 mA 136W 80 700 mA 180W 80 875 mA 235 W 96 700 mA 220 W 96 875 mA 280 W 96 1225mA 395 W DISTRIBUTION TYPE FR/T1 T2 T3 T4 T5QM T5R T5W FR/T1 T2 T3 T4 T5QM T5R T5W FR/T1 T2 T3 T4 T5QM T5R T5W FR/T1 T2 T3 T4 T5QM T5R T5W FR/T1 T2 T3 T4 T5QM T5R T5W FR/T1 T2 T3 T4 T5QM T5R T5W LUMENS 15922 14274 14137 15511 15511 15785 15372 21132 18888 18700 20571 20571 20944 20290 24866 23070 21947 24360 23138 24779 24175 25358 22665 22440 24685 24685 25133 24349 29839 27369 26336 29128 28889 29184 29010 39653 35997 35840 35455 38388 39117 36984 LPW1 116 104 103 113 113 115 112 117 105 104 114 114 116 113 106 98 93 103 98 105 103 113 101 100 110 110 112 109 106 98 93 102 103 105 102 101 91 91 90 97 99 93 B 2 3 3 2 4 4 4 2 3 3 3 4 4 5 2 3 3 3 4 5 5 2 3 3 3 4 5 5 3 4 3 3 5 5 5 3 4 4 3 5 5 5 4K (4000K nominal, 70 CRI) U 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G 1 3 3 4 2 4 2 2 4 3 4 2 4 3 2 4 3 4 2 5 3 2 4 4 5 2 5 3 2 5 4 5 3 5 4 2 5 5 5 3 5 4 LUMENS 15762 14131 13996 15356 15356 15627 15217 20322 18699 18513 20365 20365 20733 20088 24615 22839 21725 24028 22905 24541 23931 25104 22438 22216 24438 24438 24882 24106 29541 27096 26073 28837 28601 28893 28720 39260 35641 35485 35104 38008 38730 36528 LPW1 115 103 102 112 112 114 111 113 104 103 113 113 115 112 105 97 92 102 97 104 102 112 100 99 109 109 111 108 105 97 92 103 102 104 101 100 90 90 89 96 98 93 B 2 3 3 2 4 4 4 2 3 3 3 4 4 5 2 3 3 3 4 5 5 2 3 3 3 4 5 5 3 4 3 3 5 5 5 3 4 4 3 5 5 5 U 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3K (3000K nominal, 80 CRI) G LUMENS LPW1 1 13534 99 3 12133 89 3 12017 88 3 13184 96 2 13184 96 4 13417 98 2 13067 95 2 17447 97 4 16055 89 3 15895 88 4 17485 97 2 17485 97 4 17803 99 3 17065 95 2 21136 90 4 19609 83 3 18655 79 5 20632 88 2 19667 84 5 21070 90 3 20548 87 2 21554 96 4 19265 86 4 19134 86 5 20982 94 2 20982 94 5 21363 96 3 20803 93 2 25363 90 5 23264 83 4 22365 79 5 24759 88 3 24556 88 5 24809 89 4 24263 86 2 33371 85 5 30295 77 5 30162 77 5 29839 76 3 32306 82 5 32921 83 4 31049 79 B 2 3 3 2 3 4 4 2 3 3 3 4 4 4 2 3 3 3 4 4 5 2 3 3 3 4 4 5 2 3 3 3 4 5 5 3 4 3 3 5 5 5 U 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G 1 3 3 3 2 4 2 2 3 3 3 2 4 2 2 4 3 4 2 4 3 2 4 3 4 2 4 3 2 4 4 5 2 5 3 2 5 4 4 2 5 4 Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application. 1 Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA SPEC 11/16 PHOTOMETRICS Type I VP-L-96NB-280-5K-T1 25’ 50‘ Type II VP-L-96NB-280-5K-T2 100’ 75‘ 25‘ 25’ 50‘ 25‘ 1fc 25‘ 50‘ 25‘ 50‘ 25‘ 50‘ 75‘ 100‘ Type III VP-L-96NB-280-5K-T3 25’ 75‘ 25‘ 2fc 25‘ 1fc 25’ 50‘ 75‘ 50‘ 2fc 75‘ 100‘ 25’ 50‘ 25‘ 50‘ 1fc 75‘ 100‘ 1fc 100‘ 1fc Front Row Auto Optic / Type I VP-L-96NB-280-5K-FR VP-L-96NB-280-5K-T1 75‘ 25‘ 25’ 50‘ 75‘ 25‘ 2fc 1fc .5fc 50‘ 100’ 75‘ 100‘ 25‘ 50‘ 25‘ 50‘ 25‘ 75‘ .5fc 100‘ 2fc 75‘ 100’ 50‘ 50‘ 2fc 50‘ 75‘ 100‘ 25‘ 50‘ 75‘ 25‘ .5fc 25‘ 75‘ 75‘ 25‘ 100‘ .5fc Type V Rectangular VP-L-96NB-280-5K-T5R 100’ 50‘ 100’ 50‘ 25‘ 75‘ 75‘ 25‘ 50‘ 100‘ 25’ 100‘ 25‘ .5fc 25‘ 25‘ 1fc Type V Square Medium VP-L-96NB-280-5K-T5QM 100’ 50‘ 75‘ 50‘ 100‘ .5fc 50‘ 25‘ 2fc 75‘ 100‘ 75‘ Type V Round Wide VPL-96NB-280-5K-T5W 100’ 25’ .5fc 100‘ 2fc 50‘ 75‘ 25‘ 75‘ Type IV VP-L96NB-280-5K-T4 100’ 1fc 2fc 75‘ 100‘ 75‘ 100‘ 100‘ .5fc ELECTRICAL DATA PROJECTED LUMEN MAINTENANCE # OF LEDS NUMBER OF DRIVERS DRIVE CURRENT INPUT VOLTAGE SYSTEM POWER (mA) (V) (w) 64 1 625 80 2 700 80 2 875 96 2 700 96 2 875 96 2 1225 120 277 347 480 120 277 347 480 120 277 347 480 120 277 347 480 120 277 347 480 120 277 347 480 DRILL PATTERN 136 180 235 220 280 395 CURRENT (Amps) 1.1 0.5 0.4 0.3 1.5 0.6 0.5 0.4 2.0 0.8 0.7 0.5 1.8 0.8 0.6 0.5 2.3 1.0 0.8 0.6 3.3 1.4 1.1 0.8 AMBIENT TEMP. 25°C / 77°C TM-21-11 Calculated L70 60,000 100,000 (HOURS) 0.93 0.89 >377,000 1 0 25,000 1.00 0.95 50,000 0.93 1 Projected per IESNA TM-21-11 Data references the extrapolated performance projections for the 700mA base model in a 25°C ambient, based on 10,000 hours of LED testing per IESNA LM-80-08. AMBIENT LUMEN TEMPERATURE MULTIPLIER 0°C 32°F 1.02 10°C 50°F 1.01 20°C 68°F 1.00 77°F 1.00 25°C 40°C 86°F .98 40°C 104°F .98 Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). EPA Compatible with Pole drill pattern B3 4” Suggested distance from top of pole Config. 2.50” EPA Config. EPA 1 3 @ 120˚ 2 2 @ 90˚ 1.36 3 @ 90˚ 2.2 2 @ 180˚ 2 4 @ 90˚ 2.2 1 Ø5/8” 2X Ø5/16” Rectangular Arm Ø4” Pole Ø5” Pole Ø6” Pole Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2016 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA SPEC 11/16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Create Date : 2016:12:05 11:50:20-05:00 Metadata Date : 2016:12:05 11:50:55-05:00 Modify Date : 2016:12:05 11:50:55-05:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:1bcef8af-8813-2c40-87d1-caaa1877f0e2 Original Document ID : xmp.did:3b2bb6e3-1f48-47c1-b61b-cd36806b447d Document ID : xmp.id:5b39f07a-42b9-4ba2-83c2-18f160886396 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:f9bcc891-16d3-417c-8549-d9ad4dc83b27 Derived From Document ID : xmp.did:7a64b045-d677-4d50-8abc-bf982de820bc Derived From Original Document ID: xmp.did:3b2bb6e3-1f48-47c1-b61b-cd36806b447d Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:12:05 11:50:20-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools