Viper Small LED Spec Sheet

: Pdf Viper Small Led Spec Sheet Viper_Small_LED_spec_sheet spec products beacon

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

VIPER S

Cat.#
Type

Job

SERIES

design . per formance . technology

Approvals

SMALL VIPER LUMINAIRE

SPECIFICATIONS

PRODUCT IMAGE(S)

The Beacon Viper luminaire is available with a wide
choice of different LED Wattage configurations
and optical distributions designed to replace HID
lighting up to 400W MH or HPS.
Construction:
• Manufactured with die cast aluminum.
• Coated with a polyester finish that meets 		
ASTM B117 corrosion test requirements 		
and ASTM D522 cracking and loss of 		
adhesion test requirements.
• External hardware is corrosion resistant.
• One piece optical cartridge system consisting
of an LED engine, LED lamps, optics, gasket 		
and stainless steel bezel.
• Cartridge is held together with internal brass 		
standoffs soldered to the board so that it can 		
be field replaced as a one piece optical system.
• Two-piece silicone and micro-cellular
polyurethane foam gasket ensures a
weather-proof seal around each individual LED.
Electrical:

• In addition, Viper can be specified with 		
SiteSync™ wireless control system 		
for reduction in energy and maintenance cost
while optimizing light quality 24/7. See 		
ordering information or visit
www.hubbelllighting.com/sitesync for more 		
details.
Installation:			

DIMENSIONS

• Mounting options for horizontal armd, vertical
tenon or traditional arm mounting available. 		
Mounting hardware included.
Finish:
			
• IFS polyester powder-coat electro-statically 		
applied and thermocured.		
• IFS finish consists of a five stage pretreatment
regimen with a polymer primer sealer and top
coated with a thermosetsuper TGIC polyester
powder coat finish.
• The finish meets the AAMA 605.2 		
performance specification which includes 		
passing a 3000 hour salt spray test for 		
corrosion resistance and resists cracking or 		
loss of adhesion per ASTM D522 and resists 		
surface impacts of up to 160 inch-pounds.

A
B
4 1/8”

Front

A

22.75”
(578 mm)

MOUNTING OPTIONS

Listings:
• DesignLights Consortium (DLC) qualified, 		
consult DLC website for more details: http://		
www.designlights.org/QPL
• Certified to UL 1598 and CSA C22.2 No.250.0
• IDA approved
• This product is approved by the
Florida Fish and Wildlife Conservation
Commission. Separate spec available at:

Side View

Back View

RA Rectangular Arm
Accepts
2 3/8” OD
tenon, min
4” long.

Side View

Back View

SF2 2-3/8” OD Slip Fitter

http://www.beaconproducts.com/products/vipersmall

Warranty:
Five year limited warranty for more information visit:
www.hubbelllighting.com/resources/warranty

18 3/4”

PK2 2-3/8” Adjustable Knuckle

22.50”
6.0”

Controls/Options:
• Available with an optional passive infrared 		
(PIR) motion sensor capable of detecting 		

Wall Bracket (WB)
6.00”
4x 0.50”

CERTIFICATIONS/LISTINGS

EPA
.67 ft2

C
Weight:
B
11.25”
15.0 lbs
16.75”		
(6.8 kg)
(425 mm) (286 mm)

6 5/8”

• 100V through 277V, 50 Hz to 60 Hz (UNV), or
347V or 480V input.
• Power factor is ≥.90 at full load.
• Dimming drivers are standard, but must
contact factory to request wiring leads for 		
purpose of external dimming controls.
• Component-to-component wiring within the 		
luminaire may carry no more than 80% of
rated load and is certified by UL for use at 		
600VAC at 90°C or higher.
• Plug disconnects are certified by UL for use 		
at 600 VAC, 13A or higher. 13A rating
applies to primary (AC) side only.
• Fixture electrical compartment shall contain all
LED driver components and shall be provided
with a push-button terminal block for AC
power connections.
• The housing is designed for an optional twist 		
lock photo control receptacle.
• Ambient operating temperature -40°C to 40°C
• Surge protection - 20KA.
• Optional 7-pin ANSI C136.41-2013 twist-lock
photo control receptacle available. Compatible
with ANSI C136.41 external wireless control 		
devices.
• Lifeshield™ Circuit - protects luminaire from 		
excessive temperature. The device 		
shall activate at a specific, factory-preset 		
temperature, and progressively reduce power
over a finite temperature range. Operation shall
be smooth and undetectable to the eye.
Thermal circuit is designed to “fail on”,
allowing the luminaire to revert to full power 		
in the event of an interruption of its power 		
supply, or faulty wiring connection to the
drivers. The device shall be able to co-exist 		
with other 0-10V control devices (occupancy 		
sensors, external dimmers, etc.). 			

motion 360° around the luminaire. When 		
no motion is detected for the specified time, 		
the Motion Response system reduces the 		
wattage to factory preset level, reducing the 		
light level accordingly. When motion is 		
detected by the PIR sensor, the luminaire 		
returns to full wattage and full light output. 		
Please contact Beacon Products if project 		
requirements vary from standard configuration.
• Available with Energeni for optional set		
dimming, timed dimming with simple delay, or 		
timed dimming based on time of night (see 		
www.beaconproducts.com/products/energeni).

C

Intended Use:

5 1/2”

5.00”

*3000K and warmer CCTs only

2.38”

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
design . per formance . technology

© 2015 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA October 10, 2017 9:53 AM

ORDERING INFORMATION

ORDERING EXAMPLE: VPS/36NB-80/5K/T4/UNV/PCR-TL/SWP/BLC/RA/BBT

VPS
SERIES

ENGINE-WATTS

LED COLOR8

VOLTAGE

VPS viper-small

24NB-55 55W, LED

3K 3000K
4K 4000K
5K 5000K

UNV 120-277V

array

30NB-709 70W, LED
array

36NB-80 80W, LED
array

48NB-110 110W,
LED array
60NB-136 136W,

LED array

ELECTRICAL
OPTIONS
PCR-TL Twist lock

347V 347V

OPTICS4

T3 type III
T4 type IV
T5R type V, rectangular
T5QM type V, square
medium
T5W type V, round wide

BIRD DETERRENT
BSP bird spike

MOUNTING OPTIONS
RA rectangular arm for round

or square pole mount. RPA
included.
SF2 2 3/8” OD slip-fitter

CONTROL OPTIONS

PK2 2 3/8” adjustable knuckle

GENI-XX6 Energeni
SWP

1,5

SiteSync Wireless Pre-Commission

SWPM1,2,5 SiteSync Wireless Pre-Commission
MDD2,5

WB wall bracket (use with SF2
or PK2), SF2 standard

w/ Motion Detection
Motion Dimming Detector

Must specify group and zone information at time of order. See www.hubbelllighting.com/controls/sitesync for further details.
Specify time delay; dimming level and mounting height.
T4 optic only.
To rotate optics Left or right 90 degrees, specify L or R after the optical distribution example T4L.
5
Not available with other wireless control or sensor options.
6
When ordering Energeni, specifiy the routine setting code (example GENI-04). See Energeni brochure and instructions for setting
table and options. Not available with sensor options.
7
Not available for 347V or 480V input.
8
This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available at:
http://cdn.beaconproducts.com/content/products/specs/specs_files/Viper_Small_LED_turtle_spec_sheet.pdf
9
Not available with SWP and SWPM SiteSync options

textured

BMT black matte
textured

receptacle
with shorting cap
PCRU Twist lock
receptacle
2PF7 dual power
feed

T2 type II

optic

control

PCR-SC Twist lock

T1 type I

FINISH
BBT basic black

BLC3 backlight

receptacle
with photo
control

480V 480V

FR front row auto

HOUSE SIDE SHIELD
OPTIONS

WHT white textured
MBT metallic bronze
textured

BZT bronze textured
DBT dark bronze
textured

GYS gray smooth
DPS dark platinum
smooth

GNT green textured
MST metallic silver
textured
MTT metallic titanium
textured
OWI old world iron
RAL _____________

1
2
3
4

Accessories and Services (Ordered Separately)

PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting
control option, additional information will be required to complete the order. The SiteSync Commissioning Form
or alternate schedule information must be completed. This form includes Project location, Group information, and
Operating schedules. For more detailed information please visit www.HubbellLighting.com/products/sitesync or
contact Hubbell Lighting tech support at (800) 345-4928.
SiteSync fixtures with Motion control (SWPM) require the mounting height of the fixture for selection of the lens.
Examples: VP-S/24NB-55/5K/T3/UNV/SWP/RA/DBT		
SiteSync only
VP-S/24NB-55/5K/T3/UNV/SWPM-20F/RA/DBT
SiteSync with Motion Control

Catalog Number

Description

SWUSB*

SiteSync loaded on USB flash drive (Windows based only)

SWTAB*

SiteSync Windows Tablet

SWBRG

SiteSync Wireless Bridge Node

+

* When ordering with SiteSync, one of the following interface options must be chosen and ordered
separately. Each option contains the SiteSync License, GUI and Bridge Node.
+ If needed, an additional Bridge Node can be ordered.

MDD ORDERING INFORMATION: When ordering a fixture with the motion detection option (MDD), please specify the
appropriate information. These settings are specified in the ordering as shown in the example below.
33% or 50% - _____
?? / RA/DBT
1 to 30 min. - __________
VP-S/24NB-55/5K/T3/UNV/MDD - __________

DesignLights Consortium qualified.
Consult DLC website for more details:
http://www.designlights.org/QPL

High to Dim Delay Low Level Mounting Height (ft.)

Hubbell Control Solutions - Accessories (sold separately)
SiteSync Lighting Control is available from
our most popular brands in a broad range of
award-winning product families.

Catalog Number

Description

HCS System

NXOFM-1R1D-UNV

On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor
with HubbNET Radio and Bluetooth® Radio, 120-480VAC

NX Distributed
Intelligence™

WIR-RME-L

On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight
Sensor with wiSCAPE Radio, 110-480VAC

wiSCAPE™
Lighting Control

For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with
integrated sensor, please view specification sheet ordering information table for details.

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
design . per formance . technology

© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA October 10, 2017 9:53 AM

LEFT ROTATED OPTIC

RIGHT ROTATED OPTIC

PERFORMANCE DATA
5K
(5000K nominal, 70 CRI)

# LED’S

DRIVE
CURRENT
(MILLIAMPS)

SYSTEM
WATTS

24

700 mA

55 W

30

700 mA

70 W

36

700 mA

80 W

48

700 mA

110 W

60

700 mA

136 W

DISTRIBUTION
TYPE
LUMENS
FR/T1
6339
T2
5666
T3
5610
T4
6171
T5R
6283
T5QM
6171
T5W
6087
FR/T1
8096
T2
7204
T3
7743
T4
7896
T5R
8035
T5QM
7846
T5W
8305
FR/T1
9515
T2
8505
T3
8415
T4
9256
T5R
9425
T5QM
9257
T5W
9131
FR/T1
12679
T2
11332
T3
11220
T4
12342
T5R
12567
T5QM
12342
T5W
12175
FR/T1
15848
T2
14165
T3
14025
T4
15427
T5R
15708
T5QM
15427
T5W
15218

LPW1
114
102
101
111
113
111
109
113
101
108
111
112
110
116
114
101
100
110
112
110
109
114
102
101
111
113
111
110
116
103
102
113
115
113
111

B
1
2
1
1
3
3
3
1
2
2
1
3
3
3
1
2
2
1
3
3
3
2
3
2
2
4
3
4
2
3
3
2
4
4
4

U
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

4K
(4000K nominal, 70 CRI)

G
1
2
2
2
3
1
1
1
2
2
2
3
1
2
1
3
2
3
3
1
2
1
3
3
3
4
2
2
1
3
3
3
4
2
2

LUMENS
6276
5610
5554
6110
6221
6110
6027
8016
7133
7666
7817
7954
7768
8222
9414
8415
8331
9164
9331
9164
9040
15522
11220
11108
12219
12441
12219
12053
15690
14025
13885
15274
15259
15274
15066

LPW1
112
101
100
109
111
109
108
112
100
107
110
111
109
115
112
100
99
109
111
109
108
113
101
100
110
112
111
109
115
102
101
111
111
111
111

B
1
2
1
1
3
3
3
1
2
2
1
3
3
3
1
2
2
1
3
3
3
2
3
2
2
4
3
4
2
3
3
2
4
4
4

U
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

3K
(3000K nominal, 70 CRI)

G
1
2
2
2
3
1
1
1
2
2
2
3
1
2
1
3
2
3
3
1
2
1
3
3
3
4
2
2
1
3
3
3
4
2
2

LUMENS
5389
4816
4784
5245
5341
5245
5201
6882
6123
6659
6791
6829
6669
7142
8083
7224
7175
7868
8011
7868
7801
10777
9633
9567
10491
10682
10491
10402
13471
12041
11959
13114
13352
13314
13002

LPW1 B
97
1
86
1
86
1
94
1
96
3
94
2
93
3
96
1
86
2
93
2
95
1
95
3
93
3
100 3
96
1
87
2
86
2
94
1
96
3
94
3
93
3
97
1
87
2
86
2
95
2
96
3
95
3
94
4
98
2
88
3
87
3
96
2
97
4
96
3
95
4

U
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

G
1
2
2
2
3
1
1
1
2
2
2
3
1
2
1
2
2
3
3
1
2
1
3
3
3
3
2
2
1
3
3
3
4
2
2

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application.

1

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
design . per formance . technology

© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA October 10, 2017 9:53 AM

PHOTOMETRICS
Type II
VP-S-60NB-136-5K-T2
25’

100’
50‘

75‘

25‘

25’

50‘

25‘

75‘

25‘
50‘

100‘
75‘

25’

50‘
75‘

25‘

100‘

50‘

75‘

1fc

100‘

75‘

.5fc

1fc

25‘

24

75‘

36

1

48

1

60

1

100‘

.5fc

Front Row Auto Optic / Type I
VP-S-60NB-136-5K-FR
VP-S-60NB-136-5K-T1

75‘

100’
25‘

25’
50‘
100‘

75‘

25‘
50‘
75‘

25‘

100‘

50‘

50‘
100‘

75‘

25‘
75‘

25‘

.5fc

50‘

1fc

1fc

75‘

.5fc

.5fc

100‘

PROJECTED LUMEN MAINTENANCE

2

2

50‘
25‘

100‘

100‘

NUMBER
OF
DRIVERS

30

50‘

100’
25’

ELECTRICAL DATA

# OF LEDS

25‘
75‘

1fc

75‘

Type V Round Wide
VP-S-60NB-136-5K-T5W

25‘
50‘

75‘

25‘

100‘

50‘

25‘

50‘
1fc

100‘

100’
25‘

50‘
25‘

.5fc

Type V Rectangular
VP-S-60NB-136-5K-T5R

25‘

75‘

25’

50‘

50‘

100‘

100’
75‘

100’

25‘
75‘

50‘

Type V Square Medium
VP-S-60NB-136-5K-T5QM
50‘

100’
75‘

25‘

100‘

25’

50‘
25‘

1fc
.5fc

75‘

Type IV
VP-S-60NB-136-5K-T4

Type III
VP-S-60NB-136-5K-T3

DRIVE
CURRENT INPUT VOLTAGE SYSTEM POWER
(mA)
(V)
(w)
120
277
700 mA
55
347
480
120
277
700 mA
70
347
480
120
277
700 mA
80
347
480
120
277
110
700 mA
347
480
120
277
700 mA
136
347
480

EPA

CURRENT
(Amps)
0.5
0.2
0.2
0.1
0.6
0.3
0.2
0.1
0.7
0.3
0.2
0.2
0.9
0.4
0.3
0.2
1.1
0.5
0.4
0.3

AMBIENT
TEMP.
25°C / 77°C

TM-21-11
Calculated L70
60,000
100,000
(HOURS)
0.95
0.92
>470,000

1

0 25,000
1.00 0.97

50,000
0.95

1
Projected per IESNA TM-21-11
Data references the extrapolated performance projections for the base model in a 40°C ambient, based on 10,000
hours of LED testing per IESNA LM-80-08.

AMBIENT TEMPERATURE
0°C
32°F
10°C
50°F
20°C
68°F
25°C
77°F
30°C
86°F
40°C
104°F

LUMEN MULTIPLIER
1.02
1.01
1.00
1.00
0.98
0.98

Use these factors to determine relative lumen output for average ambient
temperatures from 0-40°C (32-104°F).

DRILL PATTERN
Config.
1

EPA
.67

Config.

EPA

3 @ 120˚ 1.68

Compatible with Pole drill pattern B4
4” Suggested
distance from top
of pole

1.06

3 @ 90˚

1.73

Ø5/8”
2X Ø5/16”

2 @ 180˚ 1.34

4 @ 90˚

2.12

Rectangular
Arm

2 @ 90˚

2.50”

Ø4” Pole
Ø5” Pole
Ø6” Pole

Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
design . per formance . technology

© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA October 10, 2017 9:53 AM