Win Situ 5 And Mobile Quick Start Guide
User Manual: Pdf Win-Situ Quick Start Guide
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
For Sales & Service Contact 2650 E. 40th Ave. • Denver, CO 80205 Phone 303-320-4764 • Fax 303-322-7242 1-800-833-7958 www.geotechenv.com __________________________________________ __________________________________________ Selecting the Correct COM Port Set up a Data Site ® Win-Situ 5 Quick Start Guide Use Win-Situ 5 with a laptop or a PC and the Aqua TROLL®, Level TROLL® and Rugged TROLL® Instruments. To learn more about Win-Situ 5, refer to the Help menu. Training videos are available on the In-Situ® Inc. website www.in-situ.com under Tech Resources. __________________________________________ When you open Win-Situ 5, you are asked if you want to establish a connection to your instrument. If you are using a USB TROLL Com, select the correct COM port by following the steps below. If you are using a serial TROLL Com, the Win-Situ Software should default to the correct COM port, which is usually COM 1. 1. Click the Site button. 9. Configure the level reference. Computers Using Windows® 7 IMPORTANT: Install COM drivers when prompted. __________________________________________ a. Minimize the Win-Situ Software. b. Click the Windows Start button, and open the Control Panel. c. Click Hardware and Sound, and open the Device Manager. d. Click the arrow next to Ports (COM and LPT), and locate the USB Serial Port listing. The number listed next to this entry is your COM port address. 2. Select either Default Site or click the New button to set up a custom site. 3. Enter a Site name. Entering coordinates and uploading a picture are optional. 4. Click the check mark to save the data site. __________________________________________ Set up a Data Log 1. Click the Logging tab. Connect an In-Situ Instrument to the Computer Computers Using Windows® XP a. Minimize the Win-Situ Software. b. Click the Windows Start button, and open the Control Panel. c. Double-click the system icon. Click the Hardware tab, and open the Device Manager. d. Click the plus sign next to Ports (COM and LPT), and locate the USB Serial Port listing. The number listed next to this entry is your COM port address. 1. Laptop or PC 2. TROLL Com 3. RuggedCable 4. In-Situ Instrument Once you have determined the correct Com port address, reopen Win-Situ 5 and click on Preferences. Click on Comm Settings, and then click the Port Number menu. Scroll down to find the correct Com port address. Click the Check mark button to accept the changes. Click on the yellow Connect button in the lower right corner to establish a connection to the instrument. NOTE: When an instrument is deployed on a wire, rather than a cable, you will not be able to communicate with it after installation. Select a Scheduled start if you are deploying an instrument on a wire. 8. Select a level reference type. Install Win-Situ 5 Insert the software CD that came with your product or download Win-Situ 5 from the In-Situ website at www.in-situ.com/software. Follow the on-screen prompts of the Installation Wizard to complete installation. 7. Select a start condition. IMPORTANT: Your instrument MUST be installed in its final location to set the level reference correctly. If you are setting up a data log before installing your instrument in its final location, you will need to select either “Set First Logged Reading To” or “Remind Me to Set Reference Later.” Select “Set First Logged Reading To” if you are using a scheduled start, or “Remind Me to Set Reference Later” if you are using a manual start and are NOT deploying the instrument on a wire. 10. Enter a specific gravity value for the deployment. 11. The software displays a summary. Review your selections carefully before clicking the check mark. 2. Click the New button. 12. Start the log. A Scheduled Start log will start automatically at its programmed time. To start a Manual log, go to the Logging tab, highlight the log name, and tap the Start button. __________________________________________ Real-Time Data Readings 3. Select your site, and name the new log. 4. Select the parameters you intend to monitor. You can rearrange their order and select different units. To see real-time data readings, click the Play button on the Home screen. The parameter readings will turn black and update periodically. Click the Play button again to stop reading in real time. IMPORTANT: You cannot create a new log if you have real time readings enabled. 5. Select a logging method appropriate for your deployment. 6. Configure the logging method. 0055650 rev. 007 02/12 ® Win-Situ Mobile Quick Start Guide ________________________________________ Set up a Data Site ® Use Win-Situ Mobile with a RuggedReader Handheld PC and Aqua TROLL®, Level TROLL® and Rugged TROLL® Instruments. To learn more about Win-Situ Mobile, refer to the Help menu. Training videos are available on the In-Situ Inc. website www.in-situ.com under Tech Resources. 1. Tap the Sites button. Select an existing site or tap the New button to create a new site. 5. Rearrange parameter order. Tap Edit to change units. download options and tap the check mark when finished. 2. To view the data, tap the View button. Use the View drop-down menu to select the data channel you want to view. Select the date and time interval you want and tap the check mark. 7. Configure the logging method. 8. Select a start condition. NOTE: When an instrument is deployed on a wire, rather than a cable, you will not be able to communicate with it after installation. Select a Scheduled start if you are deploying the instrument on a wire. Connect an In-Situ Instrument to the RuggedReader Serial Port 1. RuggedReader 2. Enter information on the subsequent screens and continue by tapping the right arrow button. Tap the check mark button when finished. __________________________________________ 2. TROLL Com Cable Connect Set up a Data Log 1. Tap the View menu and select logging. 4. In-Situ Instrument 9. Select log wrap condition. 10. Select a level reference type. 11. Enter a specific gravity value for the deployment. 12. Configure the level reference. IMPORTANT: Your instrument MUST be installed in its final location to set the level reference correctly. If you are setting up a data log before installing your instrument in its final location, you will need to select either “Set First Logged Reading To” or “Remind Me to Set Reference Later.” Select “Set First Logged Reading To” if you are using a scheduled start, or “Remind Me to Set Reference Later” if you are using a manual start and are NOT deploying the instrument on a wire. _________________________________________ Connect to the Software With an instrument connected, tap the Start button on the RuggedReader. Tap Win-Situ Mobile. Tap the Connect button, and tap the check mark. 4. Select the parameters you want. 6. Select a logging method appropriate for your deployment. __________________________________________ 3. RuggedCable 3. Add the log name and tap the right arrow button. 2. Tap the More button, and then tap the New button. 13. The software displays a summary. Look over your selections carefully before clicking the check mark. 14. Start the log. A Scheduled Start log will start automatically at its programmed time. To start a Manual log, go to the Logging tab, highlight the log name, and tap the Start button. __________________________________________ View or Download the Log 1. To download data, tap the Logging tab, and tap the Download button. Select the desired __________________________________________ Stop a Log After you stop a log you cannot restart it. 1. To permanently stop a log that has no scheduled stop, go to the Logging tab, and select the log. 2. Tap the More button, and then tap the Stop button. 3. Make sure that you download the data after you stop a log. __________________________________________ Drop the Connection and Exit Win-Situ Mobile Software Prior to physically disconnecting the RuggedReader from the communication cable, tap the Connect button. The button changes from blue to yellow and appears disconnected. To exit Win-Situ Mobile Software, tap the File menu and select Exit. For Sales & Service Contact 2650 E. 40th Ave. • Denver, CO 80205 Phone 303-320-4764 • Fax 303-322-7242 1-800-833-7958 www.geotechenv.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Taylor Hinton Company : Microsoft Create Date : 2012:02:29 10:30:11-07:00 Keywords : 0055650, rev., 007, 02/12 Modify Date : 2014:12:09 08:10:58-07:00 Source Modified : D:20120229172921 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:12:09 08:10:58-07:00 Creator Tool : Acrobat PDFMaker 10.1 for Word Document ID : uuid:3b5937fd-7397-4555-80cd-d6284ade1210 Instance ID : uuid:cf6cb016-efef-1b47-9177-bde4ae298f96 Format : application/pdf Creator : Taylor Hinton Title : Win-Situ 5 and Win-Situ Mobile Quick Start Guide Subject : 0055650 rev. 007 02/12 Producer : Adobe PDF Library 10.0 Page Layout : OneColumn Page Count : 2EXIF Metadata provided by EXIF.tools