Pebble Technology PEBBLE-WATCH BLUETOOTH Watch User Manual

Pebble Technology Corporation BLUETOOTH Watch

user manual

Pebble E-Paper Watch for iPhone and Android 1 4 1 Version 1.0 Pebble Technology, Corp Nov 29, 2012 Page 1 of 41 1 2 3 4 5 6 1 Button A 2 Display 3 Charge Port 4 Button B 5 Button C 6 Button D
Certifications and Safety Approvals•FCC Compliance StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION: Change or modification not expressly approved by the party responsiblefor compliance could void the user’s authority to operate this equipment.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.CAUTION:Any changes or modifications not expressly approved by the grantee of this device couldvoid the user's authority to operate the equipment.RF exposure warningThis equipment must be installed and operated in accordance with provided instructionsand the antenna(s) used for this transmitter must be installed to provide a separationdistance of at least 2.5 cm from all persons and must not be co-located or operating inconjunction with any other antenna or transmitter. End-users and installers must beprovide with antenna installation instructions and transmitter operating conditions forsatisfying RF exposure compliance."Pebble E-Paper Watch for iPhone and AndroidVersion 1.0 Pebble Technology, Corp Nov 29, 2012 Page 2 of 4
WarrantyFor more information on about the One Year Limited Warranty, please visit www.getpebble.com/warranty.Quickstart GuideEach Pebble shipment includes:- One Pebble smartwatch- One Pebble USB charge cable •Charge PebbleAttach the curved end of the Pebble USB charge cable onto Pebble. Plug the other end of the cable into a USB port on a computer, laptop or USB wall charger.To obtain a full charge, leave Pebble connected for at least 2 hours. •Download smartphone app Pebble is compatible with the following iOS devices running at least iOS 5 or greater:- iPhone 3GS - iPhone 4- iPhone 4S- iPhone 5- iPod Touch 3rd to 5th generationPebble is compatible with Android smartphones running Android OS 2.3.3 or higher.Download the Pebble App by visiting http://go.getpebble.com from the iOS or Android browser.•Bluetooth pairingEnable Bluetooth in iOS or Android settings. Perform a Bluetooth device scan. Pebble will show up with the name “Pebble XXXX” where XXXX is a unique identifier (the last 4 digits of the serial number imprinted on the back of the watch). After selecting the ‘Pair’ option, a confirmation prompt will be presented on the watch display. Press Button C to confirm the pairing. Then confirm the pairing on the smartphone side.•Open Pebble AppAfter installing the Pebble App and pairing via Bluetooth, open the Pebble App on iOS or Android. After each reboot, the Pebble App needs to be opened.Pebble E-Paper Watch for iPhone and AndroidVersion 1.0 Pebble Technology, Corp Nov 29, 2012 Page 4 of 4
1Pebble Bluetooth WatchPebble Bluetooth WatchID for reference only ID for reference only 2012/11/27 Microlink Confidential 1Key FeaturesKey Features• ST ARM 32-bit CORTEX –M3 CPU• Panasonic PAN1316 Bluetooth EDR 2.1 (4.0 disable) module support SPP, AVRCP profile; The maximum power consumption is less than 15 mA and the average powerconsumption is about 1 uA• SHARP 1.26’,TFT LCD module with 144 ×168 resolution in a 24192-pixel stripe array• Waterproof to 5 ATM• Accelerometer and magnetometer sensor• Vibrator indicate• Display Backlight • LiPoly Battery (120mAh)• 4 function Key Form FactorForm Factor• Dimension: 50.33 mm X 32 mm X 8.44 mm• Weight: 39g• Operation System – TBD

Navigation menu