Pebble Technology PEBBLE-WATCH BLUETOOTH Watch User Manual
Pebble Technology Corporation BLUETOOTH Watch
user manual
Pebble E-Paper Watch for iPhone and Android 1 4 1 Button A Button B Display Button C Charge Port Button D Version 1.0 Pebble Technology, Corp Page 1 of 4 Nov 29, 2012 Pebble E-Paper Watch for iPhone and Android Certifications and Safety Approvals • FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." Version 1.0 Pebble Technology, Corp Page 2 of 4 Nov 29, 2012 Pebble E-Paper Watch for iPhone and Android Warranty For more information on about the One Year Limited Warranty, please visit www.getpebble.com/warranty. Quickstart Guide Each Pebble shipment includes: - One Pebble smartwatch - One Pebble USB charge cable • Charge Pebble Attach the curved end of the Pebble USB charge cable onto Pebble. Plug the other end of the cable into a USB port on a computer, laptop or USB wall charger. To obtain a full charge, leave Pebble connected for at least 2 hours. • Download smartphone app Pebble is compatible with the following iOS devices running at least iOS 5 or greater: - iPhone 3GS - iPhone 4 - iPhone 4S - iPhone 5 - iPod Touch 3rd to 5th generation Pebble is compatible with Android smartphones running Android OS 2.3.3 or higher. Download the Pebble App by visiting http://go.getpebble.com from the iOS or Android browser. • Bluetooth pairing Enable Bluetooth in iOS or Android settings. Perform a Bluetooth device scan. Pebble will show up with the name “Pebble XXXX” where XXXX is a unique identifier (the last 4 digits of the serial number imprinted on the back of the watch). After selecting the ‘Pair’ option, a confirmation prompt will be presented on the watch display. Press Button C to confirm the pairing. Then confirm the pairing on the smartphone side. • Open Pebble App After installing the Pebble App and pairing via Bluetooth, open the Pebble App on iOS or Android. After each reboot, the Pebble App needs to be opened. Version 1.0 Pebble Technology, Corp Page 4 of 4 Nov 29, 2012 Pebble Bluetooth Watch Key Features Form Factor • ST ARM 32-bit CORTEX –M3 CPU • • Panasonic PAN1316 Bluetooth EDR 2.1 (4.0 disable) module support SPP, AVRCP profile; The maximum power consumption is less than 15 mA and the average power consumption is about 1 uA • SHARP 1.26’,TFT LCD module with 144 × 168 resolution in a 24192-pixel stripe array • Waterproof to 5 ATM • Accelerometer and magnetometer sensor • Vibrator indicate • Display Backlight • LiPoly Battery (120mAh) • 4 function Key • • Dimension: 50.33 mm X 32 mm X 8.44 mm Weight: 39g Operation System – TBD ID for reference only 2012/11/27 Microlink Confidential
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Eric Migicovsky Create Date : 2012:12:19 23:23:54Z Modify Date : 2012:12:25 16:27:30+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : Eric Migicovsky Title : User Manual Creator Tool : Pages Metadata Date : 2012:12:25 16:27:30+08:00 Keywords : Producer : Mac OS X 10.8.2 Quartz PDFContext Document ID : uuid:9d52a229-183d-4514-92a7-28ef8482b490 Instance ID : uuid:8d5b0b5e-ab46-4abe-a7d1-e498f08f85e5 Page Count : 5EXIF Metadata provided by EXIF.tools