Pebble Technology PEBBLE-WATCH BLUETOOTH Watch User Manual
Pebble Technology Corporation BLUETOOTH Watch
user manual
Pebble
E-Paper Watch for iPhone and Android
1 4 1
Version 1.0 Pebble Technology, Corp Nov 29, 2012
Page 1 of 4
1
1
2
3
4
5
6
1 Button A
2 Display
3 Charge Port
4 Button B
5 Button C
6 Button D
Certifications and Safety Approvals
•FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Change or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could
void the user's authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 2.5 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance."
Pebble
E-Paper Watch for iPhone and Android
Version 1.0 Pebble Technology, Corp Nov 29, 2012
Page 2 of 4
Warranty
For more information on about the One Year Limited Warranty, please visit
www.getpebble.com/warranty.
Quickstart Guide
Each Pebble shipment includes:
- One Pebble smartwatch
- One Pebble USB charge cable
•Charge Pebble
Attach the curved end of the Pebble USB charge cable onto Pebble. Plug the other end
of the cable into a USB port on a computer, laptop or USB wall charger.
To obtain a full charge, leave Pebble connected for at least 2 hours.
•Download smartphone app
Pebble is compatible with the following iOS devices running at least iOS 5 or greater:
- iPhone 3GS
- iPhone 4
- iPhone 4S
- iPhone 5
- iPod Touch 3rd to 5th generation
Pebble is compatible with Android smartphones running Android OS 2.3.3 or higher.
Download the Pebble App by visiting http://go.getpebble.com from the iOS or Android
browser.
•Bluetooth pairing
Enable Bluetooth in iOS or Android settings. Perform a Bluetooth device scan. Pebble
will show up with the name “Pebble XXXX” where XXXX is a unique identifier (the last 4
digits of the serial number imprinted on the back of the watch). After selecting the ‘Pair’
option, a confirmation prompt will be presented on the watch display. Press Button C to
confirm the pairing. Then confirm the pairing on the smartphone side.
•Open Pebble App
After installing the Pebble App and pairing via Bluetooth, open the Pebble App on iOS
or Android. After each reboot, the Pebble App needs to be opened.
Pebble
E-Paper Watch for iPhone and Android
Version 1.0 Pebble Technology, Corp Nov 29, 2012
Page 4 of 4
1
Pebble Bluetooth Watch
Pebble Bluetooth Watch
ID for reference only
ID for reference only
2012/11/27 Microlink Confidential 1
Key Features
Key Features
• ST ARM 32-bit CORTEX –M3 CPU
• Panasonic PAN1316 Bluetooth EDR 2.1 (4.0
disable) module support SPP, AVRCP profile;
The maximum power consumption is less
than 15 mA and the average power
consumption is about 1 uA
• SHARP 1.26’,TFT LCD module with 144 ×
168 resolution in a 24192-pixel stripe array
• Waterproof to 5 ATM
• Accelerometer and magnetometer sensor
• Vibrator indicate
• Display Backlight
• LiPoly Battery (120mAh)
• 4 function Key
Form Factor
Form Factor
• Dimension:
50.33 mm X 32 mm X 8.44 mm
• Weight: 39g
• Operation System – TBD