Pelco Security Camera Eh2512 Users Manual EH2500 Series Dust Tight Enclosure_service

EH2512 to the manual cf097e0b-9a0e-488c-82ef-cf6255ca8ef5

: Pelco Pelco-Pelco-Security-Camera-Eh2512-Users-Manual-441408 pelco-pelco-security-camera-eh2512-users-manual-441408 pelco pdf

Open the PDF directly: View PDF .
Page Count: 8

EH2500 Series

Dust-Tight Enclosure

Maintenance/

Service Manual

C1473SM-B (9/04)

®

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com

In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150

International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120

2Pelco Manual C1473SM-B (9/04)

CONTENTS

Section Page

IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3

DESCRIPTION ...................................................................................................................4

MODELS ....................................................................................................................4

MAINTENANCE .................................................................................................................4

EXPLODED ASSEMBLY DIAGRAMS ................................................................................5

WARRANTY AND RETURN INFORMATION .................................................................... 8

LIST OF ILLUSTRATIONS

FigurePage

1EH2500 Series Exploded Assembly Diagram .................................................... 5

2EH2500 Series Wiring Diagram ......................................................................... 7

LIST OF TABLES

Table Page

AEH2500 Series Exploded Assembly Parts List ..................................................6

BEH2500 Series Wiring Diagram Parts List .........................................................7

Pelco Manual C1473SM-B (9/04) 3

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and con-

form to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-

sure, it is designed for indoor use only and it must not be installed where exposed to

rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. After replacement/repair of this unit’s electrical components, conduct a resistance

measurement between line and exposed parts to verify the exposed parts have not

been connected to line circuitry.

5. The installation method and materials should be capable of supporting four times the

weight of the unit and equipment.

The product and/or manual may bear the following marks:

Please thoroughly familiarize yourself with the information in this manual prior to installation

and operation.

This symbol indicates that dangerous volt-

age constituting a risk of electric shock is

present within this unit.

This symbol indicates that there are impor-

tant operating and maintenance instructions

in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

4Pelco Manual C1473SM-B (9/04)

DESCRIPTION

The EH2500 Series enclosures are sealed, dust-tight and waterproof camera enclosures designed

to protect a CCTV camera and lens from adverse environmental conditions.

The enclosures feature a sled for camera mounting and a “T” handle on the rear plate to assist in

removing the back plate during installation and servicing.

All models will accept CCD cameras with fixed focal length or motorized zoom lenses.

MODELS

EH2508 6.25” L x 2.75” W x 2.75” H (15.88 x 6.99 x 6.99 cm)

EH2508-1/-2/-3 5.25” L x 2.75” W x 2.75” H (13.44 x 6.99 x 6.99 cm), 120/24/230 VAC heater

EH2512 10.25” L x 2.75” W x 2.75” H (26.04 x 6.99 x 6.99 cm)

EH2512-1/-2/-3 9.25” L x 2.75” W x 2.75” H (23.50 x 6.99 x 6.99 cm), 120/24/230 VAC heater

EH2515 13.25” L x 2.75” W x 2.75” H (33.66 x 6.99 x 6.99 cm)

EH2515-1/-2/-3 12.25” L x 2.75” W x 2.75” H (31.12 x 6.99 x 6.99 cm), 120/24/230 VAC heater

MAINTENANCE

Regularly scheduled maintenance is not required. Clean the outer surface of the enclosure with a

nonabrasive cleaning cloth and antistatic cleaner. Clean the viewing window with mild nonabrasive

soap and water to maintain picture clarity. Do not use kerosene or similar substances that may

damage the surface.

Pelco Manual C1473SM-B (9/04) 5

EXPLODED ASSEMBLY DIAGRAMS

Figure 1. EH2500 Series Exploded Assembly Diagram

17

18

19

20 2X

21 2X

22 *

23 24 2X

25

26 4X

2X 15

1

2

3 *

4

5 2X

6

7

8 *

9 *

10 2X

11 2X

12 *6X

13 2X*

16

*Available only with

models that have heaters

6Pelco Manual C1473SM-B (9/04)

Table A. EH2500 Series Exploded Assembly Parts List

Item Qty Description Part Number

11Camera sled, EH2508 EH2584300COMP

1Camera sled, EH2512 EH25124300COMP

1Camera sled, EH2515 EH25154300COMP

21T-handle EH2584202COMP

31Terminal bracket EH2584901COMP

41Rear plate EH2584902COMP

52Liquid-tight fitting HF00-1300-3500

61Thermostat EH5510049A

71Self-sealing fastener, 10-24 x .750" EHP10001

81Thermostat TH01-8570-0100

91Terminal block, 4-position TRB323HDS-04

10 2 Screw, 6-32 x 5/8", button head, captive ZH00-0213-0709

11 2 Nylon washer, #6 ZH150X310X32N

12 6 4-40 x 1/4", Phillips pan head screw and lock washer ZH01-2001-0403

13 2 4-40 x 3/8", Phillips pan head screw and lock washer ZH01-2001-0405

14 N/A ZH4LWSIS

15 2 Screw, 6-32 x 5/8", socket head cap ZH6-32X.625CS

16 1 O-ring ZH69-0205-2404

17 1 Housing, EH2508 EH2584102COMP

1Housing, EH2512 EH25124102COMP

1Housing, EH2515 EH25154102COMP

18 1 Window EH2584501COMP

19 1 Cosmetic decal OL01-0023-0001

20 2 Screw, captive, 6-32 x 5/8", button head, socket ZH00-0213-0709

21 2 Nylon washer, #6 ZH150X310X32N

22 1 Dual-element window heater, 120 VAC HT01-0012-0204

1Dual-element window heater, 24 VAC HT01-0022-0204

1Dual-element window heater, 230 VAC HT01-0032-0204

23 1 O-ring ZH69-0205-2404

24 2 Pelco label LBLG10020

25 1 Mount EH2584200COMP

26 4 Screw, 8-32 x 3/8", button head, hex socket ZH01-0401-0805

Pelco Manual C1473SM-B (9/04) 7

Figure 2. EH2500 Series Wiring Diagram

Table B. EH2500 Series Wiring Diagram Parts List

Item Qty Description Part Number

11 Connector, 3-pin plug CON1-480303-0

21 Connector, 3-pin cap CON1-480305-0

31 Connector, 2-pin plug (camera power) CON1-480318-0

41 Connector, 2-pin cap CON1-480319-0

51 Dual-element window heater,120 VAC HT71-0012-204

1Dual-element window heater, 24 VAC HT72-0022-204

1Dual-element window heater, 230 VAC HT73-0032-204

61 Terminal bracket EH2584901COMP

71 Thermostat EH5510049A

81 Thermostat TH01-8570-0100

91 Terminal block, 4-position TRB323HDS-04

10 N/A ZH4LWSIS

11 4 4-40 x 1/4",

Phillips pan head screw and lock washer

ZH01-2001-0403

12 2 4-40 x 3/8",

Phillips pan head screw and lock washer

ZH01-2001-0405

13 2 Screw, 6-32 x 5/8", socket head, cap ZH6-32X.625CS

-- 1 6-32 thumbnut (not shown) ZH6-32THUMNUT

5

12

9

13

4

3

6

11

7

4

1

PIN 1

PIN 2

PIN 3

PIN 2

PIN 1

PIN 2

PIN 1

PIN 1 RED WIRE (NEUTRAL)

PIN 2 BLACK WIRE

PIN 3 WHITE WIRE

HEATING

ELEMENT

POWER

TERMINAL 4 (AC LOW)

TERMINAL 3 (AC HIGH)

INPUT

POWER

ENCLOSURE

INPUT

POWER

CAMERA

TERMINAL 2

TERMINAL 1

CAMERA

POWER

{

{

{

{

8Pelco Manual C1473SM-B (9/04)

© Copyright 2004, Pelco.

Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco. All rights reserved.

REVISION HISTORY

Manual # Date Comments

C1473SM-A 9/98 Original version.

7/00 Revised Figure 2 and Table B for new heater elements per ECO# 00-6032.

C1473SM-B 9/04 Revised parts list per ECO# 04-9848. Product redesigned to fit CC3610/CC3710/CC3770/MC3610/MC3710 Series cameras.

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or

workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

• Five years on FT/FR8000 Series fiber optic products.

• Three years on Genex

®

Series products (multiplexers, server, and keyboard).

•Three years on Camclosure

®

and fixed camera models, except the CC3701H-2,

CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,

which have a five-year warranty.

•Two years on standard motorized or fixed focal length lenses.

•Two years on Legacy

®

, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series

fixed dome products.

•Two years on Spectra

®

, Esprit

®

, ExSite

™

, and PS20 scanners, including when used in

continuous motion applications.

•Two years on Esprit

®

and WW5700 Series window wiper (excluding wiper blades).

•Eighteen months on DX Series digital video recorders, NVR300 Series network video

recorders, and Endura

™

Series distributed network-based video products.

•One year (except video heads) on video cassette recorders (VCRs). Video heads will be

covered for a period of six months.

•Six months on all pan and tilts, scanners or preset lenses used in continuous motion

applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco

shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,

California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident

are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from

the specific use or application made of the Products. Pelco’s liability for any claim, whether

based on breach of contract, negligence, infringement of any rights of any party or product

liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for

such Products. In no event will Pelco be liable for any special, incidental or consequential

damages (including loss of use, loss of profit and claims of third parties) however caused,

whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have

additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or

(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following

information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the

warranty conditions stated above, please include a written explanation with the product

when returned.

Method of return shipment shall be the same or equal to the method by which the item was

received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at

(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned

for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and refurbishing

charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA

number and freight should be prepaid. Ship to the appropriate address below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:

Service Department

Pelco

3500 Pelco Way

Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are

instructed to return goods to the USA, you may do one of the following:

If the goods are to be sent by a COURIER SERVICE, send the goods to:

Pelco

3500 Pelco Way

Clovis, CA 93612-5699 USA

If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:

Pelco c/o Expeditors

473 Eccles Avenue

South San Francisco, CA 94080 USA

Phone: 650-737-1700

Fax: 650-737-0933