Pelco Security Camera Eh2512 Users Manual EH2500 Series Dust Tight Enclosure_service

EH2512 to the manual cf097e0b-9a0e-488c-82ef-cf6255ca8ef5

: Pelco Pelco-Pelco-Security-Camera-Eh2512-Users-Manual-441408 pelco-pelco-security-camera-eh2512-users-manual-441408 pelco pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

®

EH2500 Series
Dust-Tight Enclosure

Maintenance/
Service Manual

C1473SM-B (9/04)

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120

CONTENTS
Section

Page

IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3
DESCRIPTION ................................................................................................................... 4
MODELS .................................................................................................................... 4
MAINTENANCE ................................................................................................................. 4
EXPLODED ASSEMBLY DIAGRAMS ................................................................................ 5
WARRANTY AND RETURN INFORMATION .................................................................... 8

LIST OF ILLUSTRATIONS
Figure
1
2

Page
EH2500 Series Exploded Assembly Diagram .................................................... 5
EH2500 Series Wiring Diagram ......................................................................... 7

LIST OF TABLES
Table
A
B

2

Page
EH2500 Series Exploded Assembly Parts List .................................................. 6
EH2500 Series Wiring Diagram Parts List ......................................................... 7

Pelco Manual C1473SM-B (9/04)

IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.

Installation and servicing should only be done by qualified service personnel and conform to all local codes.

2.

Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.

3.

Only use replacement parts recommended by Pelco.

4.

After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.

5.

The installation method and materials should be capable of supporting four times the
weight of the unit and equipment.

The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.

CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.

Pelco Manual C1473SM-B (9/04)

3

DESCRIPTION
The EH2500 Series enclosures are sealed, dust-tight and waterproof camera enclosures designed
to protect a CCTV camera and lens from adverse environmental conditions.
The enclosures feature a sled for camera mounting and a “T” handle on the rear plate to assist in
removing the back plate during installation and servicing.
All models will accept CCD cameras with fixed focal length or motorized zoom lenses.

MODELS
EH2508

6.25” L x 2.75” W x 2.75” H (15.88 x 6.99 x 6.99 cm)

EH2508-1/-2/-3

5.25” L x 2.75” W x 2.75” H (13.44 x 6.99 x 6.99 cm), 120/24/230 VAC heater

EH2512

10.25” L x 2.75” W x 2.75” H (26.04 x 6.99 x 6.99 cm)

EH2512-1/-2/-3

9.25” L x 2.75” W x 2.75” H (23.50 x 6.99 x 6.99 cm), 120/24/230 VAC heater

EH2515

13.25” L x 2.75” W x 2.75” H (33.66 x 6.99 x 6.99 cm)

EH2515-1/-2/-3

12.25” L x 2.75” W x 2.75” H (31.12 x 6.99 x 6.99 cm), 120/24/230 VAC heater

MAINTENANCE
Regularly scheduled maintenance is not required. Clean the outer surface of the enclosure with a
nonabrasive cleaning cloth and antistatic cleaner. Clean the viewing window with mild nonabrasive
soap and water to maintain picture clarity. Do not use kerosene or similar substances that may
damage the surface.

4

Pelco Manual C1473SM-B (9/04)

EXPLODED ASSEMBLY DIAGRAMS

17

18
19

26 4X
25
23
20 2X

24 2X

22 *
21 2X
4
5 2X

12 *6X
1

9 *

10 2X

6

3 *

11 2X

2
2X 15
16

7

8 *

13 2X*
*Available only with
models that have heaters

Figure 1. EH2500 Series Exploded Assembly Diagram

Pelco Manual C1473SM-B (9/04)

5

Table A. EH2500 Series Exploded Assembly Parts List
Item
1

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

18
19
20
21
22

23
24
25
26

6

Qty
1
1
1
1
1
1
2
1
1
1
1
2
2
6
2
2
1
1
1
1
1
1
2
2
1
1
1
1
2
1
4

Description
Camera sled, EH2508
Camera sled, EH2512
Camera sled, EH2515
T-handle
Terminal bracket
Rear plate
Liquid-tight fitting
Thermostat
Self-sealing fastener, 10-24 x .750"
Thermostat
Terminal block, 4-position
Screw, 6-32 x 5/8", button head, captive
Nylon washer, #6
4-40 x 1/4", Phillips pan head screw and lock washer
4-40 x 3/8", Phillips pan head screw and lock washer
N/A
Screw, 6-32 x 5/8", socket head cap
O-ring
Housing, EH2508
Housing, EH2512
Housing, EH2515
Window
Cosmetic decal
Screw, captive, 6-32 x 5/8", button head, socket
Nylon washer, #6
Dual-element window heater, 120 VAC
Dual-element window heater, 24 VAC
Dual-element window heater, 230 VAC
O-ring
Pelco label
Mount
Screw, 8-32 x 3/8", button head, hex socket

Part Number
EH2584300COMP
EH25124300COMP
EH25154300COMP
EH2584202COMP
EH2584901COMP
EH2584902COMP
HF00-1300-3500
EH5510049A
EHP10001
TH01-8570-0100
TRB323HDS-04
ZH00-0213-0709
ZH150X310X32N
ZH01-2001-0403
ZH01-2001-0405
ZH4LWSIS
ZH6-32X.625CS
ZH69-0205-2404
EH2584102COMP
EH25124102COMP
EH25154102COMP
EH2584501COMP
OL01-0023-0001
ZH00-0213-0709
ZH150X310X32N
HT01-0012-0204
HT01-0022-0204
HT01-0032-0204
ZH69-0205-2404
LBLG10020
EH2584200COMP
ZH01-0401-0805

Pelco Manual C1473SM-B (9/04)

INPUT
POWER
ENCLOSURE

{

TERMINAL 4 (AC LOW)
TERMINAL 3 (AC HIGH)

INPUT
POWER
CAMERA

{

TERMINAL 2

9

TERMINAL 1

12

4

PIN 1

7

PIN 2
PIN 3

11

PIN 1 RED WIRE (NEUTRAL)

{

PIN 2 BLACK WIRE
PIN 3 WHITE WIRE

HEATING
ELEMENT
POWER

13
6
5
1

PIN 2
PIN 1

4
3
CAMERA
POWER

{

PIN 1
PIN 2

Figure 2. EH2500 Series Wiring Diagram
Table B. EH2500 Series Wiring Diagram Parts List
Item
1
2
3
4
5

6
7
8
9
10
11
12
13
--

Qty
1
1
1
1
1
1
1
1
1
1
1
4
2
2
1

Pelco Manual C1473SM-B (9/04)

Description
Connector, 3-pin plug
Connector, 3-pin cap
Connector, 2-pin plug (camera power)
Connector, 2-pin cap
Dual-element window heater,120 VAC
Dual-element window heater, 24 VAC
Dual-element window heater, 230 VAC
Terminal bracket
Thermostat
Thermostat
Terminal block, 4-position
N/A
4-40 x 1/4", Phillips pan head screw and lock washer
4-40 x 3/8", Phillips pan head screw and lock washer
Screw, 6-32 x 5/8", socket head, cap
6-32 thumbnut (not shown)

Part Number
CON1-480303-0
CON1-480305-0
CON1-480318-0
CON1-480319-0
HT71-0012-204
HT72-0022-204
HT73-0032-204
EH2584901COMP
EH5510049A
TH01-8570-0100
TRB323HDS-04
ZH4LWSIS
ZH01-2001-0403
ZH01-2001-0405
ZH6-32X.625CS
ZH6-32THUMNUT

7

PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or
workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
• Five years on FT/FR8000 Series fiber optic products.
• Three years on Genex ® Series products (multiplexers, server, and keyboard).
• Three years on Camclosure ® and fixed camera models, except the CC3701H-2,
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,
which have a five-year warranty.
• Two years on standard motorized or fixed focal length lenses.
• Two years on Legacy ®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series
fixed dome products.
• Two years on Spectra ®, Esprit®, ExSite™, and PS20 scanners, including when used in
continuous motion applications.
• Two years on Esprit ® and WW5700 Series window wiper (excluding wiper blades).
• Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura ™ Series distributed network-based video products.
• One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.
• Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident
are not covered under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from
the specific use or application made of the Products. Pelco’s liability for any claim, whether
based on breach of contract, negligence, infringement of any rights of any party or product
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for
such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused,
whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have
additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following
information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under the
warranty conditions stated above, please include a written explanation with the product
when returned.
Method of return shipment shall be the same or equal to the method by which the item was
received by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned
for credit, and RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are
instructed to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933

REVISION HISTORY
Manual # Date
C1473SM-A 9/98
7/00
C1473SM-B 9/04

Comments
Original version.
Revised Figure 2 and Table B for new heater elements per ECO# 00-6032.
Revised parts list per ECO# 04-9848. Product redesigned to fit CC3610/CC3710/CC3770/MC3610/MC3710 Series cameras.

Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.

8

© Copyright 2004, Pelco.
All rights reserved.

Pelco Manual C1473SM-B (9/04)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
About                           : uuid:bfcf3fd8-bb8b-11da-b9db-000a95a25184
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Keywords                        : Camera Site Equipment|Enclosures|High Security
Create Date                     : 2005:06:10 09:12:05-07:00
Modify Date                     : 2006:04:04 08:18:11-07:00
Metadata Date                   : 2006:04:04 08:18:11-07:00
Creator Tool                    : Adobe PageMaker 7.0
Document ID                     : uuid:b93be6b4-bb8b-11da-b9db-000a95a25184
Instance ID                     : uuid:f1efc62d-6b35-4aaa-9f8d-ff1154f2e31a
Format                          : application/pdf
Creator                         : 
Title                           : Pelco EH2500 Series Dust-Tight Enclosure_service manual
Description                     : 
Page Count                      : 8
Subject                         : 
Author                          : 

EXIF Metadata provided by EXIF.tools