Penclic K2 PENCLIC WIRELESS KEYBOARD User Manual MIN K wireless PRINTx

Download:
Mirror Download [FCC.gov]
Document ID	1733421
Application ID	yT9B+5ZyQt7+aUdISwI0QQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.23kB (627871 bits)
Date Submitted	2012-06-29 00:00:00
Date Available	2012-06-29 00:00:00
Creation Date	2012-06-27 17:56:29
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-06-27 17:56:29
Document Title	Microsoft Word - MIN-K wireless PRINT.docx
Document Creator	Acrobat PDFMaker 7.0 for Word

www.penclic.se
Penclic wireless Keyboard Quick guide
EN
Quick guide
Smile.
EN
Welcome to the quick guide.
Penclic wireless Keyboard combines ergonomically
sound design with modern keyboard technology
to bring you comfort and efficiency.
Penclic wireless Keyboard setup
Insert the rechargeable batteries and start
charging with the included USB charging
cable, the USB port supports only charging function.
then set the keyboard power switch on the bottom
of the keyboard to ON.
Driver installation starts automatically.
The wireless connection activates automatically.
Special functions (blue text) activated by holding
the Fn key and then pressing:
How to use your Penclic wirelessss
Keyboard
Fn +
Function
Penclic wireless Keyboard K2 (wireless) has 1 LED
F2
Mute
F3
Lower volume
F4
Higher volume
F9
Pause/Break
F10
Scroll Lock
indicating battery status.
LED behavior
1 red flash
Indication
The keyboard on/
off switch was set
to on.
Num Lock actives the numpad functions which
is the smaller orange numbers.
F11
Num Lock
LED flashes red
Recharge your
repeatedly
battery. (NOTE:Do
not recharge
non-rechargeable
batteries.)
F12
Print Screen
Delete
Insert
Up arrow
Page Up
LED flashes
Battery is currently
Left arrow
Home
green repeatedly
being recharged.
Down Arrow
Page Down
Right Arrow
End
LED is
Battery is currently
constantly green
being recharged.
Technical specifications
·
The supported platforms for Penclic wireless
Keyboard are all operating systems that
support HID 1.1. These include Windows XP or
later, Mac OSX version 10.1 or later and most
Linux/BSD flavors. No extra software/driver
installation is needed.
·
Connection USB.
·
AAA 1.2V NiMH Recharging battery (Everyday
·
·
Un-plug and re-plug the USB receiver.
Connect to another USB port.
LR 03/AAA/1.5V Alkaline None rechargeable
·
Connect to another computer.
battery can be used. NOTE: DO NOT
RECHARGE.
·
Check the battery.
USB-receiver 2,4GHz.
Energy saving mode starts after 10 min, press
MAC operating systems do not support all the
Measurements
·
connector is firmly attached to the computer’s
USB port.
·
special functions.
·
Make sure the Penclic wireless Keyboard USB
·
a button to start.
·
·
use last approximately 2 months before
charging is needed).
-Charging via USB .
-Wireless reach, minimum 5 metres
-Connection via USB .
·
Troubleshooting
Height: 6 mm (21 mm at top),
Base: 285 x 162 mm.
Weight: 381g including 1.4m cable.
Technical support
Should you require additional technical support
with your Penclic®, please use our Web site
(www.penclic.se) for further information or contact
our support group through e-mail. Call Technical
Support during business hours, Central European
time (UTC+1).
Contact
+ 46 8 544 98 995
contact@penclic.se
6
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2012:06:27 17:56:29+08:00
Create Date                     : 2012:06:27 17:56:29+08:00
Metadata Date                   : 2012:06:27 17:56:29+08:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Format                          : application/pdf
Title                           : Microsoft Word - MIN-K wireless PRINT.docx
Document ID                     : uuid:292bca34-b15b-41f4-ba0e-70797d182608
Instance ID                     : uuid:83f6d672-fc08-47ff-94c5-42201bb779aa
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 7
Creator                         : Acrobat PDFMaker 7.0 for Word

EXIF Metadata provided by EXIF.tools