Pentair Aquatic Systems MOBILETOUCH2A Mobi2 User Manual MobileTouch Manual Rev A 072408

Download:
Mirror Download [FCC.gov]
Document ID	979836
Application ID	ODjOyh68OnmqcikuqQFJyQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.57kB (1732105 bits)
Date Submitted	2008-08-01 00:00:00
Date Available	2008-08-01 00:00:00
Creation Date	2008-07-24 17:00:21
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-07-24 17:04:10
Document Title	MobileTouch Manual (Rev A) 072408
Document Creator	Adobe PageMaker 7.0
Document Author:	TL

pool/spa control system
IntelliTouch® Pool & Spa
Control System
MobileTouch® Wireless Controller
User’s and Installation Guide
MobileTouch Wireless Controller User’s and Installation Guide
i
MobileTouch Wireless Controller kit contents
The following items are included in the MobileTouch Controller kit. If any items
are missing please contact Technical Support.
•
MobileTouch wireless controller
•
AC/DC power adapter
•
Cradle
•
User’s and Installation Guide (this manual)
Technical Support
Sanford, North Carolina (8 A.M. to 5 P.M. ET)
Moorpark, California (8 A.M. to 5 P.M. PT)
Phone: (800) 831-7133 - Fax: (800) 284-4151
Related manuals - Download the IntelliTouch User’s Guide (P/N 520102) at:
http://www.pentairpool.com/owners_manuals/controls
IntelliTouch_Pool_Spa_Cntrls_Instll_Guide.pdf
CAUTION: IMPORTANT BATTERY INFORMATION
•
Danger of explosion if battery is incorrectly replaced.
•
Replace battery with the same type recommended by Pentair. Use Pentair
Battery Replacement Kit (P/N 520815Z).
•
Rechargeable Lithium-ion battery disposal: Unwanted lithium ion
battery pack may be returned to your local recycling center or the
manufacturer for disposal.
•
Dispose of used batteries according to the manufacturer’s instructions.
•
Dismantling or opening the device (with the exception of the battery door)
or case will void warranty and may possibly cause electric shock.
FCC Regulatory Safety Notice - This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Modifications not expressly approved by the party responsible for FCC compliance could
void the user’s authority to operate the equipment.
RF Exposure Requirements: This Device must not be co-located or operated in conjunction
with any other antenna or transmitter.
IC Regulatory Notice
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
© 2008 Pentair Water Pool and Spa, Inc. All rights reserved.
1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000
10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 553-5000
MobileTouch®, IntelliTouch® and Pentair Water Pool and Spa® are trademarks and/or registered trademarks of Pentair Water
Pool and Spa, Inc. and/or its affiliated companies in the United States and/or other countries. Unless noted, names and brands
of others that may be used in this document are not used to indicate an affiliation or endorsement between the proprietors of
these names and brands and Pentair Water Pool and Spa, Inc. Those names and brands may be the trademarks or registered
trademarks of those parties or others.
P/N 520886 - Rev A - 07/24/2008
MobileTouch Wireless Controller User’s and Installation Guide
1
Contents
Charging the MobileTouch Wireless Controller ....................................... 2
Setting up the MobileTouch Wireless Controller ..................................... 4
MobileTouch Transceiver Antenna Location ........................................... 7
Installing the MobileTouch Transceiver .................................................. 8
Optional Serial COM Port Expansion Board ........................................ 13
MobileTouch Wireless Controller
The MobileTouch wireless controller provides the same functionality as
the IntelliTouch Indoor Control Panel. It has an operating range of up to
500 ft. from the MobileTouch antenna (Transceiver), which is typically
located near the IntelliTouch load center. The optimum wireless
transmit and receive range may be affected by physical obstructions,
(especially those containing metal), and geographical features.
The MobileTouch controller LCD (liquid crystal display) can be
sensitive to sunlight. When exposed for extended periods, the LCD
screen will heat up and turn black. If this happens, place the remote in
a shaded area and allow the screen to cool down. Do not attempt to
adjust the contrast or the screen will be unreadable when it eventually
cools. When used outside, keep the remote covered or in a shaded
area. Prolonged exposure to sunlight may permanently damage the
unit.
WARNING! Do not plug in the AC adapter to a power source
within five (5) feet of the pool and spa. Canadian installations require a
minimum of (3) meters from pool water. Do not recharge outdoors.
Only use Pentair approved AC adapter transformer.
The MobileTouch wireless controller is water resistant and can be
exposed to temporary splashing or wet hands. However, the controller
is not intended to be submersed. Remove unit immediately if it is
dropped in the water or exposed to rain. Store the unit indoors in a dry
environment. Be sure the gold charging contacts are dry before
charging.
MobileTouch Wireless Controller (Previous Model)
The previous model of the MobileTouch wireless controller and
Transceiver antenna cannot be used with the latest model of the
MobileTouch wireless controller and Transceiver antenna. Both models
cannot coexist in the same IntelliTouch system.
MobileTouch Wireless Controller User’s and Installation Guide
2
Charging the MobileTouch Wireless Controller
When you are not using the MobileTouch controller, place it in the
cradle to recharge the battery. This allows the battery to be fully
charged at all times.
To charge the MobileTouch controller battery
•
Plug the AC adapter into an AC wall outlet.
•
Insert the AC Adapter plug into the bottom of the cradle.
•
Place the MobileTouch controller in the cradle.
Note: When the MobileTouch controller is placed in the cradle the
display and backlight will be on. After five minutes the backlight
will shut off. The MobileTouch unit and display are always on
when seated in the cradle. To turn the backlight on, press any
button.
To use the MobileTouch wireless controller
1. Remove the MobileTouch wireless controller from the
cradle. Note: With AC power connected to the cradle, the
MobileTouch controller can be used while seated in the
cradle.
2. Press the Power On/Off button (front lower right-side) to
switch the unit on. The main screen is displayed. The LCD
backlight will turn off in five minutes if not in use. The
battery icon displays three solid bars, only when it’s fully
charged. Note: If the MobileTouch is not being used for
extended periods of time, press the Power On/Off switch
to turn the controller Off.
Cradle
Power On/Off button
MobileTouch controller seated in cradle
MobileTouch Wireless Controller User’s and Installation Guide
3
Main Screen Check Battery Icon
The check battery icon is located in the lower right corner of the main
screen. If the battery icon displays one or no bars or the screen is
blank, this may indicate that the battery cannot power the device and
needs recharging.
A complete battery charge takes about 3 to 4 hours. During battery
recharge, the battery icon bars scroll from right to left. After a
complete battery recharge, the battery icon is replaced with a power
plug icon, indicating the battery is fully charged and is now operating
on AC power from the cradle. Note: If the battery requires
replacement, only use Pentair replacement battery (P/N 520815Z).
Battery Icon
Three solid bars indicate
ample battery charge.
During battery recharge,
bars scroll right to left.
Sufficient charge left in the
batteries to operate device.
Batteries will deplete soon.
Power Plug Icon
The power plug icon displays when the battery
is fully charged and the MobileTouch controller
is operating on AC power supplied from cradle
MobileTouch Wireless Controller User’s and Installation Guide
4
Setting up the MobileTouch Wireless Controller
The following describes how to assign the MobileTouch wireless
controller a communication address for the first time and to add a
MobileTouch controller to a system with a controller already installed.
After connecting the Transceiver cable to the IntelliTouch load center
(see page 8), the system is ready to setup MobileTouch controller.
To manually setup the MobileTouch controller:
1. On the IntelliTouch Outdoor Control Panel, press the Reset
button (see below).
2. First Time MobileTouch install: The three red System
Control LEDs will be lit (solid). Wait a few seconds then
press the “F” Filter button. For IntellliTouch model i10+3,
press the “P” Pool Filter Pump button.
Add a MobileTouch with existing MobileTouch installed:
The three red System Control LEDs will be lit (solid). Wait
a few seconds then press the “V” button or “1” button.
3. The three red System Control LEDs and the auxiliary
button LEDs will begin cycling. Wait until the LEDs stop
cycling. The three System Control LEDs will start to blink
on and off. The IntelliTouch system is ready to assign an
address for the MobileTouch wireless controller; continue
with Step 4 on page 5.
Note: Press V or 1 button to add a
MobileTouch controller with existing
MobileTouch controller(s) already installed.
Three System
Control LEDs
Auxiliary LEDs
F button
(i5+3, i5S+3 i7+3,
i9+3S, i9+3D)
P button (i10+3D) IntelliTouch Outdoor Control Panel
MobileTouch Wireless Controller User’s and Installation Guide
Reset
button
5
Setting up the MobileTouch Wireless Controller (continued)
Go to the Advanced screen.
Getting There
MENU
SETUP
ADVANCED
4. From the MobileTouch Advanced screen, press the lower
buttons 2 and 4 at the same time. The Service Personnel
screen is displayed.
Press button 2 and 4 at the same time to
access the Service Personnel screen
5. Press the button next to LOCK ON ADDRESS to access
the next screen.
MobileTouch Wireless Controller User’s and Installation Guide
6
6. Press the button next to LOCK ON ADDRESS to assign a
unique frequency for the MobileTouch controller to avoid
interference from other wireless devices within range of the
MobileTouch transceiver.
7. After selecting “Lock On Address” the MobileTouch
controller is now ready to operate the IntelliTouch system.
The “Service Personnel” screen will be displayed.
8. Press Exit to return to the main screen or proceed with
Step 9 if you are adding another MobileTouch controller
while the IntelliTouch outdoor control panel LEDs are
flashing.
9. To add another MobileTouch controller at this time,
repeat Steps 4 (page 5) through 8 for each controller, if not,
continue with Step 10.
10. Return to the Load Center or Power Center. The System
Control LEDs will be flashing. Press the Reset button.
When the “Auto” LED is illuminated the process is complete
and the system is ready for operation.
MobileTouch Wireless Controller User’s and Installation Guide
7
MobileTouch Transceiver Antenna Location
The Transceiver optimum wireless transmit and receive range may be
affected by physical obstructions, (especially those containing metal),
weather conditions, and geographical features.
The MobileTouch controller has an operating range of up to 500 ft.
(line-of-sight) from the MobileTouch Transceiver. The Transceiver kit
includes a 10 ft. connection cable. If needed, using extra cable, the
cable length can be lengthened to 300 ft. The recommended locations
for the Transceiver are shown below.
Recommended locations for Transceiver Antenna
Note: Only one MobileTouch controller Transceiver can be
used per IntelliTouch system.
Possible
antenna
location
Possible
antenna
location
Possible
antenna
location
LOAD
CENTER
MobileTouch Wireless Controller User’s and Installation Guide
8
Installing the MobileTouch Transceiver
The MobileTouch controller has an operating range of up to 500 ft.
(line-of-sight) from the MobileTouch Transceiver. The Transceiver kit
includes a 10 ft. connection cable. If needed, using extra cable, the
cable length can be lengthened to 300 ft. The recommended locations
for the Transceiver are shown on page 7.
To install the Transceiver:
1. Choose an installation location for the Transceiver near the
IntelliTouch load center.
2. Remove the two lower retaining screws from the
Transceiver and slide the Transceiver case up to remove it
from the back plate.
3. Remove the Transceiver circuit board from the back plate by
carefully lifting it up out of the back plate supports. Place the
circuit board on a clean dry surface away from direct
sunlight.
4. Mount the Transceiver back plate (see page 9) onto a flat
wooden surface, such as a wooden fence, or post. While
holding the back plate, install two lower mounting screws
through the back plate lower mounting holes. Tighten the
screws to secure the back plate in place. Install two screws
through the upper mounting holes.
5. Slide the Transceiver circuit board into the back plate into the
board side supports.
6. Route the Transceiver cable up through the bottom of the
back plate (see page 9) to the screw terminal connector.
7. Insert the four wires into the screw terminals of the
Transceiver connector. Using a small flat-blade screwdriver,
secure the wires with the screws. Make sure to match the
color coding of the four wires (see page 12 for wiring
diagram).
8. Carefully slide the case over the Transceiver antenna and
secure it to the back plate with the two lower retaining
screws.
9. Proceed with “Connecting the Transceiver cable to the
IntelliTouch Personality board” on page 10.
MobileTouch Wireless Controller User’s and Installation Guide
9
Case
Antenna
Transceiver circuit board
GND
B LK
- DT
GRN
+ DT
YEL
15V
R ED
Screw terminals
Upper mounting point
(screw)
Upper mounting point
(screw)
Back plate
Lower mounting
point (screw)
Lower mounting
point (screw)
Left-side Transceiver
circuit board support
Lower exit hole (left side)
Retaining screws
Transceiver Module
MobileTouch Wireless Controller User’s and Installation Guide
10
Connecting the Transceiver cable to the Personality board
WARNING Switch OFF the main system power to the Load Center
before making any connections.
1. Unlatch the two enclosure door spring latches, and open the
door.
2. Remove the two retaining screws securing the high voltage
cover-panel, and remove it from the enclosure.
3. Loosen the two access screws securing the control panel.
Access
screw
Access
screw
Control panel
Panel retaining
screw
(Cover-panel
not shown)
Retaining
screw
Load Center
4. Lower down the hinged control panel to access the
Personality board.
MobileTouch Wireless Controller User’s and Installation Guide
11
5. Route the transceiver cable into the lower plastic grommet,
up through the low voltage raceway to the Personality board.
Control panel
Personality
board
Raceway
6. Insert the four wires into the screw terminals of the COM
PORT plug located on the Personality board as shown below.
Using a small flat-blade screwdriver, secure the wires with
the screws. Make sure to match the color coding of the four
wires:
Pin 4 - Red = +15
Pin 3 - Yellow = +DT
Pin 2 - Green = -DT
Pin 1 - Black = GND
Note: If there no available COM port
terminals for the Transceiver cable
plug connector to plug in to, the
optional Serial COM Port Expansion
Board (P/N520818) can be used (see
page 13). Multiple wires may also be
inserted into a single screw terminal.
IntelliTouch Personality
board COM PORTS
(J7/J8) screw terminal
connector
BLK
GRN
YEL
RED
MobileTouch Wireless Controller User’s and Installation Guide
12
MobileTouch
outdoor wireless
transceiver located
within 10 feet from
IntelliTouch Load
Center
COM PORT screw
terminal connector
GND
B LK
- DT
GRN
+ DT
YEL
15V
R ED
Personality board COM PORT Pin configuration
7. After the connection has been completed, close the control
panel into its original position and secure it with the two
access screws.
8. Close the IntelliTouch front panel and secure it with the two
retaining screws.
9. Close the IntelliTouch Load Center front door. Fasten the
two spring latches.
10. Switch the power on to the IntelliTouch Load Center.
11. Proceed to “Setting up MobileTouch and IntelliTouch”
on page 4.
MobileTouch Wireless Controller User’s and Installation Guide
13
Optional Serial COM Port Expansion Board
(for use with IntelliTouch® control systems)
If there is not an available COM port for the Transceiver cable plug on
the IntelliTouch Personality board, the optional Serial COM port
Expansion Board (P/N 520818) can be used for additional COM ports
connections.
Mounting the Expansion Board
1. Remove the inside terminal connectors (with wires attached)
from the Expansion board and connect it to a COM port on
the Personality board.
Note: If this a new Load Center installation, you’ll have
to remove one of the existing (empty) terminal connectors
from the Personality board to allow for the Expansion
board terminal connector. You can place the (empty)
connector onto the available COM port on the
Expansion board.
Remove this terminal connector
and connect it to an available COM
port on the IntelliTouch Personality
board.
Personality Board
2. Mount the Expansion board on to the back wall in the low
voltage compartment of the IntelliTouch load center using the
four adhesive backed supports.
3. Proceed to “Connecting the Transceiver cable plug to the
Serial COM Port Expansion Board,” on page 14.
MobileTouch Wireless Controller User’s and Installation Guide
14
Connecting the Transceiver cable plug to the Serial Com
Port Expansion Board
Connect the Transceiver cable plug onto one of the available Serial
COM port expansion board connector terminals.
Note: If you have existing accessories (IntelliChlor, IntelliFlo)
connected to the IntelliTouch Personality board and need to free
up connectors for additional equipment, remove one of the existing
connectors (with the attached wires to equipment) from the
Personality board and plug it into an available connector on the
Expansion board COM port (as shown below).
Connect IntelliFlo
wires to two-pin
terminal connector
Connect existing
Connect to COM port on
accessory connectors IntelliTouch Personality
wires here
board
Expansion
board
adhesive
backed
supports (x4)
Low voltage
compartment
Cables to
accessories
(IntelliChlor,
Indoor Control
Panel etc.)
Connector from the Expansion board
MobileTouch Wireless Controller User’s and Installation Guide
15
Notes
MobileTouch Wireless Controller User’s and Installation Guide
16
Notes
MobileTouch Wireless Controller User’s and Installation Guide
17
Notes
MobileTouch Wireless Controller User’s and Installation Guide
P/N 520886 - Rev A
MobileTouch Wireless Controller User’s and Installation Guide
*520886*

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : Adobe PageMaker 7.0
Modify Date                     : 2008:07:24 17:04:10-07:00
Create Date                     : 2008:07:24 17:00:21-07:00
Metadata Date                   : 2008:07:24 17:04:10-07:00
Format                          : application/pdf
Description                     : Pentair Water Pool and Spa, Inc.
Title                           : MobileTouch Manual (Rev A) 072408
Creator                         : TL
Document ID                     : uuid:01ce1e6f-1405-4b8b-a346-9dd27a9ca017
Instance ID                     : uuid:a08abefe-ea10-40c6-8f4a-d5ea285d46e6
Page Count                      : 20
Subject                         : Pentair Water Pool and Spa, Inc.
Author                          : TL
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools