Pepperl Fuchs IQH1F198V1 RFID Reader User Manual Data Sheet

Pepperl + Fuchs Inc RFID Reader Data Sheet

User Manual

Read/write head IQH1-F198-V11Release date: 2017-09-19 13:04 Date of issue: 2017-10-06 t187851_eng.xmlGermany: +49 621 776 4411Pepperl+Fuchs GroupRefer to “General Notes Relating to Pepperl+Fuchs Product Information”.USA: +1 330 486 0001 Singapore: +65 6779 9091www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.comfa-info@de.pepperl-fuchs.comModel NumberIQH1-F198-V1HF read/write head, ISO 15693, for IDENTControlFeatures• Operating frequency 13.56 MHz• Conforms to ISO 15693• Suitable for FRAM transponder• Particularly flat construction• Connection cable with V1 plug (M12 x 1)• Degree of protection IP67•For connection to IDENTControl con-trol interfaceAccessoriesIQC21-30PData carrierIQC21-50PData carrierIQC21-58Data carrierIQC33-20Data carrierIQC22-C1Data carrierIQC33-30Data carrierIQC33-50Data carrierV1-G-5M-PUR-ABG-V1-WConnecting cable, M12 to M12, PUR ca-ble 4-pin, shieldedV1-G-10M-PUR-ABG-V1-WConnecting cable, M12 to M12, PUR ca-ble 4-pin, shieldedDimensionsElectrical connectionTechnical dataGeneral specificationsOperating frequency  13.56 MHzTra n s f e r  r ate  2 6  k B i t / sSensing range   Read distance  0 ... 150 mmWrite distance  0 ... 150 mmWidth max. 145 mmIndicators/operating meansLED green/yellow  green: power ongreen flashing: read/write attempt performedyellow: data carrier detectedElectrical specificationsPower consumption  P0≤ 1.3 WSupply  from the IDENTControlAmbient conditionsAmbient temperature  -25 ... 70 °C (-13 ... 158 °F)Storage temperature  -40 ... 85 °C (-40 ... 185 °F)Compliance with standards and direc-tivesDirective conformity   R&TTE Directive 1995/5/EC  EN 301489-1:2011 V1.9.2, EN 301489-3:2013 V1.6.1, EN 300330-2:2015 V1.6.1, EN 60950-1:2006Standard conformity   Electromagnetic compatibility  EN 61000-6-2:2005, EN 61000-6-4:2006Degree of protection  EN 60529RFID  ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3 ,Approvals and certificates10578ø 145175ø 6.6 (4x)48.596.5 76.5102.5190.512Shield+A-B12341423
Release date: 2017-09-19 13:04 Date of issue: 2017-10-06 t187851_eng.xml2Germany: +49 621 776 4411Pepperl+Fuchs GroupRefer to “General Notes Relating to Pepperl+Fuchs Product Information”.USA: +1 330 486 0001 Singapore: +65 6779 9091www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.comfa-info@de.pepperl-fuchs.comIQH1-F198-V1Read/write headFCC approval  This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.IC approval  This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is sub-ject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploita-tion est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioé-lectrique subi, même si le brouillage est susceptible d'en com-promettre le fonctionnement.Radio approval  USA: FCC IREIQH1F198V1Canada: IC 7037A-IQH1F198V1NotesThis equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference when the equipment is operated in a commercial environ-ment. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual, may cause harmful interferenceto radio communications. Operation of this equipment in a residential area is likely to causeharmful interference in which case the user will be required to correct the interference at hisown expense.

Navigation menu