Perfect Tech Co BT809X BLUETOOTH HEADSET User Manual US N00037

Download:
Mirror Download [FCC.gov]
Document ID	969475
Application ID	cGZpO7J4DZuRWrhzaR111Q==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.46kB (155708 bits)
Date Submitted	2008-07-11 00:00:00
Date Available	2008-07-14 00:00:00
Creation Date	2008-05-23 08:41:23
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-07-07 15:09:13
Document Title	US-N00037.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	art-new-1

WARNINGS
• Do not expose to damp.
• Do not use solvents or abrasive materials to
clean the BT 809.
• Do not expose to high temperatures (the
battery might explode).
• Only use the original recharger supplied in
the box.
• Do not dismantle either the earpiece or the
battery recharger.
• If the earpiece is not going to be used for
some time, we recommend that you
recharge the battery and store everything in
a cool, dry place.
Keep the product out of the reach of
children. (certain small parts could be
swallowed)
The fully charged battery has power for
4-6 hours talking time, 150-200 hours
standby time. However, the time may vary
when used with different mobile phones or
other compatible Bluetooth devices,
usage settings, usage styles, and
environments.
Leaving the device in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the capacity
and lifetime of the battery. Always try to
keep the battery between 0 and 50 C.
Advice with a hot or cold battery may not
work temporarily, even when the battery is
fully charger. Battery performance is
particularly limited in temperatures well
below freezing.
BT809X
User’s guide
BT809X
Thank you for choosing the BT 809
Bluetooth earpiece. Before using it for the first
time, follow the instructions printed below.
Volume Up button
Volume Down and
Mute button
Power On / Off
Red LED indicator
Microphone
CHARGING THE BATTERY OF THE EARPIECE
The earpiece uses a battery with high
performance “Lithium Polymer” technology.
The first time you use the earpiece, the battery
inside may not be charged and it will be
necessary to charge it up.
Recharge. Connect the battery recharger to
the electric socket and to the earpiece. The
red light will come on and the recharging
process will begin. When the battery has been
recharged the light will go off. It will take
about two hours to fully recharge the battery.
Battery dead. When the BT 809 battery has
almost run down, the light will flash red and a
beep will be heard in the earpiece.
NOTE: to extend the life of the battery, we
recommend that you leave the BT 809 switched
off while recharging and only recharge it
when it is dead. If the BT 809 has not been used
for some time, it may take a few minutes for
the red light to come on.
Status
Stand-by
LED
Flashing BLUE
“Find me” mode
Flashing RED/BLUE
Calling
Quick flashing BLUE
Battery dead
Slow flashing RED
Recharge
Fixed RED
SWITCHING ON, CONNECTING AND
SWITCHING OFF THE EARPIECE
Switching on.
Press the multifunction button and keep it
pressed until the blue light flashes three times
(about 1 second). The BT 809 will switch to
stand by.
Connecting. After switching on the BT 809,
briefly press the multifunction button to
connect the earpiece to the last device with
which it has been associated (only after
making the association).
Switching off. Press the multifunction button
and keep it pressed until the red light flashes
three times (about 5 seconds).
ASSOCIATION OF THE EARPIECE WITH A
BLUETOOTH DEVICE
Before using the Bluetooth headset, you must
associate it with the device you are going to
use it with (telephone/PC).
ASSOCIATION
• Ensure that the BT 809 is switched off. Press
the multifunction button and keep it pressed
until the light starts flashing red/blue (about
3 seconds), in this way the earpiece is ready
to be picked up by other devices (“find me”
mode).
• Run the search for new Bluetooth
accessories from your device (phone/PC)*.
At the end of the search the name of our
earpiece will appear on the display (the
name may vary from device to device).
• Select the BT Headset and, when requested
to do so, enter the PIN 1234, then press “OK”.
• The phone/PC will tell you that the new
bluetooth device has been associated, while
the BT 809 light will flash blue (stand-by).
NOTE: With some phones it might be
necessary to authorise connection
from the phone.
* To make the association, follow the
instructions in the user manual supplied
with the phone or with the PC Bluetooth
interface. The BT 809 will stay in "Find me"
mode for a maximum of two minutes. If the
association is not completed within this
time, the earpiece will revert automatically
to stand-by.
USING THE BT 809 WITH MOBILE PHONES
After associating our earpiece with a phone it
can be used to manage calls with the various
functions supported.
ATTENTION: the possibility to use all the
functions of our earpiece depends exclusively
on the functions supported by the phone in
use (e.g.: if the phone does not support voice
calls, this function will not be available).
Answering calls. When you receive a call, the
BT 809 will play the tune (or the musical notes
depending on the phone) in the earpiece. Briefly
press the multifunction button to answer.
Ending calls. During a call, briefly press the
multifunction button to end the conversation.
Refusing a call. When you receive a call, wait
to hear the tune, then press the
“Multifunction” button for 3 seconds (you will
hear a beep in the earpiece and the call
will be refused).
Regulating the volume. During a
conversation or in stand-by mode, repeatedly
press the “Volume +” button to increase the
incoming volume or the “Volume -” button to
lower it.
Transferring calls. Using the BT 809 it is
possible, during a phone call, to transfer the
conversation from the earpiece to the
telephone and vice versa.
Earset > Mobile phone
Press and hold the “Volume +” button for
1 second. You will hear a beep in the
headset and the conversation will be
transferred to the phone.
Mobile phone > Earset
Press and hold the “Volume +” button for
1 second. You will hear a beep in the
headset and the conversation will be
transferred to the earpiece. (With Nokia
phones all you have to do is press the
multifunction button for 1 second)
Voice calls. While the earpiece is in stand-by
mode, briefly press the multifunction button
and, when requested to do so, pronounce the
name of the person you wish to call.
ATTENTION: to use this function the name
has to be vocally recorded in the phone book
first.
Recalling the last number.
Press and hold the “Multifunction” button
for 3 seconds. You will hear a beep in the
headset and call the last number called.
“MUTE” function. During a conversation,
press the “Volume -” button for 1 second
to activate “Mute” mode. To deactivate it
, press and hold the “Volume -” button for
1 second again.
Call Waiting: During a conversation press
and hold "Multifunction" betton for 3seconds.
You will hear a beep in the headset and a
call active, another call is on hold. To deactivate,
press and hold the "Multifunction" button for
1 second again. (Some cell phone does not
contain the call waiting function.)
USING THE BT 809 WITH A PC
Connection. Start the connection from the
PC. When you hear the tune in the headset,
briefly press the multifunction button to
accept the connection.
ATTENTION: it is important that the
connection is made in this way. If the
connection is activated from the headset it
may not be possible to use it as an audio
peripheral (in this case, disconnect and repeat
the connection).
Listening to music. To use the BT 809 as an
audio peripheral it is necessary to proceed as
follows.
• Enter the “Control Panel”.
• Select “Sounds and multimedia”, then select
the “Audio” folder**.
• In the “Sound Reproduction” section, select
the “Bluetooth Audio” peripheral**.
In this way all the musical files will be
reproduced using our earpiece as the
preferred listening peripheral.
** The settings may vary depending on the
operating system.
Use with SKYPE. After connection, start the
“Skype” system installed to use our headset
during conversation.
ATTENTION: it is necessary to have
configured a Skype account to use this
service.
BT809X
FCC Notice to Users
The following statement applies to all
products that have
received FCC approval. Applicable
products bear the FCC
logo, and/or an FCC ID in the format
FCC-ID: TB6-BT809X
on the product label.
Perfect Tech Co., Ltd has not approved any
changes or modifications to this
device by the user. Any changes or
modifications could void the
user’s authority to operate the equipment. See
47 CFR Sec. 15.21.
This device complies with part 15 of the FCC
Rules. Operation is
subject to the following two conditions: (1) This
device may not
cause harmful interference, and (2) this device
must accept any
interference received, including interference
that may cause
undesired operation. See 47 CFR Sec.
15.19(3).
This equipment has been tested and found to
comply with the
limits for a Class B digital device, pursuant to
part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection
against harmful interference in a residential
installation. This
equipment generates, uses and can radiate
radio frequency energy
and, if not installed and used in accordance
with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment does
cause harmful
interference to radio or television reception,
which can be
determined by turning the equipment off and
on, the user is
encouraged to try to correct the interference
by one or more of the
following measures:
‧ Reorient or relocate the receiving antenna.
‧ Increase the separation between the
equipment and the
receiver.
‧ Connect the equipment to an outlet on a
circuit different
from that to which the receiver is connected.
‧ Consult the dealer or an experienced
radio/TV technician
for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2008:05:23 08:41:23+08:00
Modify Date                     : 2008:07:07 15:09:13+08:00
Metadata Date                   : 2008:07:07 15:09:13+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:B5A933F76028DD11BA12B7CD229BA5CD
Instance ID                     : uuid:314e0b50-a8a9-4ef4-867c-d3c12e1ec729
Derived From Document Name      : uuid:3f455c02-36a6-11dc-9d04-001451631c89
Derived From Instance ID        : uuid:cfc026ee-578e-4a4a-b800-72b5187690b0
Derived From Document ID        : uuid:3f454e7b-36a6-11dc-9d04-001451631c89
Format                          : application/pdf
Title                           : US-N00037.pdf
Creator                         : art-new-1
Has XFA                         : No
Page Count                      : 3
Author                          : art-new-1

EXIF Metadata provided by EXIF.tools