Phicomm WR203OA 300Mbps Wireless N Router User Manual UM FWR 714N V1 0 indd

Shanghai Feixun Communication Co., Ltd. 300Mbps Wireless N Router UM FWR 714N V1 0 indd

Contents

User Manual I

Copyright StatementFeixun is the registered trademark of Shanghai Feixun Communication Co.,Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shanghai Feixun Communication Co.,Ltd. Without the permission of Shanghai Feixun Communication Co.,Ltd., individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. All the photos and product specifications mentioned in this manual are for references only, as the upgrading of software and hardware, there will be changes. And if there are changes, Feixun is not responsible for informing in advance. If you want to know more about our products information, please visit our website at www.feixun.com.cn
Table of Contentsi300Mbps Wireless N RouerCONTENTSIntroduction ………………………………………………………………………………… 1Product Overview ……………………………………………………1Main Features ………………………………………………………3Installation …………………………………………………………………………………… 5Physical Connection …………………………………………………5Configure the Computers IP Address ………………………………5Setup Wizard …………………………………………………………8Router Confi guration …………………………………………………………………11Basic Setting ……………………………………………………… 11WAN Interface Settings ……………………………………………………… 11Wireless Settings …………………………………………………………… 12Wireless Security Settings …………………………………………………… 13Expert Setting …………………………………………………… 14Network Settings …………………………………………………………… 15Operating Mode …………………………………………………………… 15LAN Interface Settings …………………………………………………… 16WAN Interface Settings …………………………………………………… 16PPTP VPN Server …………………………………………………………… 16MAC Address Cloning ……………………………………………………… 17Wireless Settings …………………………………………………………… 18Basic Settings ……………………………………………………………… 18Wireless Security Settings ………………………………………………… 18Wireless MAC Address Filtering …………………………………………… 18Advanced Wireless Settings ……………………………………………… 19Wireless Client List ………………………………………………………… 20WPS Settings ……………………………………………………………… 20WDS Settings ……………………………………………………………… 21DHCP Server ………………………………………………………………… 23
Table of Contentsii300Mbps Wireless N RouerDHCP Service ……………………………………………………………… 23Static Address Allocation ………………………………………………… 24DHCP Client List …………………………………………………………… 24Forwarding Rule ……………………………………………………………… 24Port Forwarding …………………………………………………………… 25Port Triggering Settings …………………………………………………… 25DMZ Host ………………………………………………………………… 27UPnP Settings ……………………………………………………………… 28Multicast Forwarding Settings …………………………………………… 28Security Options ……………………………………………………………… 28Security Settings …………………………………………………………… 28Advanced Security Settings ……………………………………………… 29LAN Web Management …………………………………………………… 30Remote Web Management ……………………………………………… 30Access Control ……………………………………………………………… 31MAC/IP/Port Filter Settings ……………………………………………… 31Web URL Filtering ………………………………………………………… 31Routing Settings ……………………………………………………………… 32Static Routing Table ……………………………………………………… 32Dynamic Routing Settings ………………………………………………… 32IP Bandwidth Control ………………………………………………………… 33IP Bandwidth Control Settings …………………………………………… 33IP Bandwidth Control List ………………………………………………… 33Dynamic DNS Settings ……………………………………………………… 34System Tools ………………………………………………………………… 34Network Time Settings …………………………………………………… 35Diagnosis Tools …………………………………………………………… 35Load Default Settings ……………………………………………………… 37Export and Load Settings ………………………………………………… 37Reboot …………………………………………………………………… 37System Settings …………………………………………………………… 38
Table of Contentsiii300Mbps Wireless N RouerSystem Log ………………………………………………………………… 38Traffic Statistics …………………………………………………………… 38Setup Wizard ……………………………………………………… 39Software Upgrade ……………………………………………… 39Software Update …………………………………………………………… 39Logout …………………………………………………………… 39Specifi cation ………………………………………………………………………………40Appendix A: Troubleshooting ……………………………………………………41Appendix B: Certifi cation ……………………………………………………………43FCC Statement …………………………………………………… 43CE Mark Warning ………………………………………………… 44Appendix C: Glossary …………………………………………………………………45Appendix D: Technical Support …………………………………………………47
1300Mbps Wireless N RouerChapter 1: Introduction Introduction Product Overview Thank you for choosing FWR-714N Wireless N Router. FWR-714N 300Mbps Wireless N Router is an all-in-one router, ideal for home and SOHO users to share broadband Internet connection over the wired and wireless network. With the speed of up to 300Mbps, it can provide users with extraordinary smooth internet surfing, internet phone calling, on-line gaming, and HD video streaming. Moreover, by adopting two external Omni-directional antennas and MIMO technology, FWR-714N could greatly increases the wireless range & sensitivity, which enables you to receive wireless signals in the farthest corner of your home or office. And you can quickly setup the security at a simple push of the “WPS” (Wi-Fi Protected Setup) button on the fashionable designed router, preventing your device from potential internet attacks. Front PanelPower WLAN WPS WAN 1 3 42 Power LED: The Power LED lights up when the Router is powered on. When the Router goes through its self-diagnostic mode during every boot-up, the LED flashes. When the diagnostic is complete, the LED is continuously lit.WLAN LED: The Wireless LED lights up when the wireless feature is enabled. It flashes when
2300Mbps Wireless N RouerChapter 1: Introductionthe Router sends or receives data over the wireless network.Wi-Fi Protected Setup (WPS) LED: If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network. To use Wi-Fi Protected Setup, refer to the section of Wi-Fi Protected Setup.WAN: The Internet LED lights up when there is a connection made through the Internet port. It flashes to indicate network activity over the Internet port.LED (1-4): These LEDs are corresponding with the LAN ports on the rear panel. The LED is continuously lit when the Router is connected to a device through that port. It flashes to indicate network activity over that port.LED Status DescriptionPower On Power is onOff Power is offWLAN On Wireless network is switched onOff Wireless LAN is disabledBlink Data is transmittingWPSOff WPS function is disabledBlink A wireless device is connecting to the network by WPS function. This process will last in the first 2 minutes On A wireless device has been successfully connected to the network by WPS functionWAN On Internet is connectedOff Internet is unconnectedBlink Data is transmittingLAN (Port 1-4) On LAN port is connectedOff LAN port is unconnectedBlink Data is transmitting
3300Mbps Wireless N RouerChapter 1: IntroductionRear PanelResetWANLAN 1~4 WPSPowerON/OFFReset: Long press and hold the button for 8 seconds, the Router will reboot to its factory default settings. WPS: Press the button and the WPS LED in front panel flashing, WPS function is enabled.WAN: Using an Ethernet cable (also called a network or Internet cable), the Internet port connects the Router to your Internet connection, which is typically a cable or Digital Subscriber Line (DSL) modem.LAN(1~4): Using Ethernet cables, these Ethernet ports (4, 3, 2, 1) connect the Router to computers and other Ethernet network devices on your wired network.Power: The Power port connects to the included power adapter.ON/OFF: The power on/off button. Main Features • 4 LAN ports and 1 WAN port • Wireless N speed up to 300Mbps, ideal for internet surfing, on-line gaming and HD video streaming • MIMO technology greatly increases the wireless range, sensitivity and stability• Multi-SSID allows users to create multiple networks, and distributes access privilege of each
4300Mbps Wireless N RouerChapter 1: Introductionnetwork• QoS controls the reasonable allocation of bandwidth to achieve optimum utilization, ensuring reliable Internet connection• Quick wireless security setup by simply pressing the WPS button• WDS wireless bridge provides seamless bridging to expand your wireless network • Built-in firewall featured with IP, MAC, URL filtering and ARP attack prevention to protect your PC• Backward compatible with 802.11b/g product• Setup wizard simplifies installation and configuration
5Chapter 2: Installation300Mbps Wireless N Rouer Installation Physical Connection12PCModemInternetPower Socket6543Router WAN WPS RSTON/OFFPWR LAN4 LAN3 LAN2 LAN1 Note:• Actual product may be different as the picture, but the installation will be the same.• Please use the included power adapter. Use of a different power adapter could cause damage and void the warranty for this product.• Please ensure the Power, LAN and WAN lights are ON when the installation finished successfully. Confi gure the Computers IP AddressAfter connecting your PC to the router, you need to configure your PCs IP address. For Windows XP/20001. Click Start>Control Panel.
6Chapter 2: Installation300Mbps Wireless N Rouer2. Select and double click Network Connection. 3. Right click Local Area Connection and then select Properties.
7Chapter 2: Installation300Mbps Wireless N Rouer4. Select Internet Protocol (TCP/IP) and click Properties.5. Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK.For Windows Vista/71. Click Start>Control Panel.2. Click View network status and tasks and then click Manage network connection
8Chapter 2: Installation300Mbps Wireless N Rouer(Change adapter settings for Windows 7). 3. Right click Local Area Connection and then click Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.5. Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. Setup WizardAfter successful installation, now you can go ahead with connecting to the internet, the operations are as following:1. Open your web browser and enter 192.168.0.1.2. You are prompt to enter the Username/Password (preset as admin/admin) which you can found on the label at the bottom of your router, and then click Login.3. After a successful login, the following page will appear. Click Next.
9Chapter 2: Installation300Mbps Wireless N Rouer4. You are prompted to select your WAN interface type, there are three types available: DHCP, Static IP and PPPoE.a. Select Dynamic IP (DHCP) if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services. Router will obtain IP address information automatically. In this case, no need to input anything but click Next.b. Select Static IP if all the internet ports IP information is provided to you by your ISP, you will need to enter in the IP address, subnet mask, gateway address and DNS address, and then click Next.c. PPPoE is typically used for DSL services. Select PPPoE and fill the Username and Password information provided by your ISP, and then click Next.
Chapter 2: Installation10300Mbps Wireless N Rouer5. In this page, please set the Wireless Network Name (SSID), Mode, Wireless Security, click Next.6. Click Finish, you would successfully access to the internet.
11Chapter 3: Router Configuration300Mbps Wireless N Rouer Router Confi gurationYou will see the five main menus on the left of the web-based utility. On the right, there are the corresponding explanations and instructions. The Status page provides the current status information about the Router. All information is read-only. Basic SettingThe basic setting section configures the Router to your Internet connection. Most of this information can be obtained through your Internet Service Provider (ISP). WAN Interface Settings
12Chapter 3: Router Configuration300Mbps Wireless N RouerWAN Interface Connection Type:Dynamic IP: Obtain the IP address automatically assigned by the DHCP server from the ISP. Static IP: Have a static IP address provided by the ISP. PPPoE: Access the Internet by virtual ADSL dialup.L2TP: Layer 2 Tunneling Protocol (L2TP) is a service applies to connections in Israel only.PPTP: Point-to-Point Tunneling Protocol (PPTP) is a service applies to connections in Europe only.Select the connection type according to the information provided by your Internet Service Provider (ISP), and fill in the information accordingly. Wireless SettingsThe basic settings for wireless networking are set on this screen. In this page, you can set the basic network parameters of the wireless network of the router.
13Chapter 3: Router Configuration300Mbps Wireless N RouerWireless Status: If you do not have any other wireless devices in your network, select Wireless Disabled.Wireless Network Name (SSID): The name of routers wireless network. The wireless work station must keep the same SSID name with the APs for connections. By select Hidden or Isolated, the device can open or close to search available APs. Mode: From this drop-down menu, you can select the wireless standards running on your network:• 11b /g / n - M i x e d : If you have only Wireless-G Wireless-N and Wireless-B devices in your network, select 11b/g /n - M i x e d .• 11b /g - M i x e d : If you have only Wireless-G and Wireless-B devices in your network, select 11b/g-Mixed.• Wireless-G Only: If you have only Wireless-G devices, select Wireless-G Only.• Wireless-B Only: If you have only Wireless-B devices, select Wireless-B Only.Channel: You can use the channel same as the AP. By enabling Open Scanning button to find out the available APs channel. SSID Broadcast: Select enable to enable the devices SSID to be visible by wireless clients. BSSID: It is a 48-bit identity used to identify a particular BSS (Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC (Medium Access Control) address of the AP.Frequency Bandwidth: Select wireless work frequency 20M or 20/40M. Save: Click the Save button to save your setting. Wireless Security SettingsThe wireless security settings configure the security of your wireless network(s). Six wireless security modes, WEP, WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise and RADIUS, are supported. If you do not want to use wireless security, select Disable from the drop-down menu.WIRELESS NETWORK NAME (SSID): Select SSID to be configured security. The device
14Chapter 3: Router Configuration300Mbps Wireless N Rouersupports to configure different security classes between the main SSID and the subordinate SSID. Security Mode: There are several different security modes; you can choose one from disable, open, share, WEPAUTO, WPA-PSK WPA2-PSK, and WPA-PSK/WPA2-PSK etc.. The operations of each security mode are as following:• Mode 1: Security Mode > DisableIf you do not want to use wireless security, check this radio button. • Mode 2: Security Mode > Open/Share/ WEPAUTO It is based on the IEEE 802.11 standard. If you check this radio button, you will find a notice in red as show in Figure 4-18. You can choose the type for the WEP security on the pull-down list. You can select Shared Key or Open System authentication type automatically based on the wireless stations capability and request. Default Key: Select a valid encryption key. WEP Key 1, 2, 3, 4: Enter the WEP key here. Please note that the key should be in accordance with the key format and be valid. The key should be ASCII Characters or Hexadecimal Digits. Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as the Authentication Type. • Mode 3: Security Mode>WPA-Personal/WPA2-PersonalWPA PSK (Wi-Fi Protected Access): A Wi-Fi standard is a more recent wireless encryption scheme, designed to improve the security features of WEP. It applies more powerful encryption types (such as TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]) and can change the keys dynamically on every authorized wireless device. WPA Algorithms: Select one encryption type, AES or TKIP. (AES is stronger than TKIP) Pass Phrase: Default as 12345678, please enter a new key (8-63 ASCII characters). Key Renewal Interval: It is to tell how often the Router changes key. The default time is 3600s; do not change it unless it is necessary. Note: To improve security level, do not set the keyword with words that can be found in a dictionary or too easy to remember. Expert SettingExpert Setting enables users to realize many advanced funtions of the router. Under this menu, there are ten submenus as follow:
15Chapter 3: Router Configuration300Mbps Wireless N Rouer Network SettingsThere are five submenus under the Network Setting menu as shown below. Click any of them, and you will be able to configure the corresponding function. • Operating ModeThis page is used to set the operating mode of the device. Please choose Bridge mode or router mode according to your requirement; When the NAT is enabled, it can provide the transfer of internal / external networks addresses for the LAN and wireless networks. You can choose the mode for the router on the pull-down list.
16Chapter 3: Router Configuration300Mbps Wireless N Rouer• LAN Interface SettingsMAC Address: The Routers physical MAC address as seen on your local network, which is unchangeable. IP Address: The Routers LAN IP Address (not your PCs IP address). Once you modify the IP address, you need to remember it for the Web-based Utility login next time. 192.168.0.1 is the default value. Subnet Mask: It’s shown the Routers subnet mask for measurement of the network size. 255.255.255.0 is the default value. Save: Click the Save button to save your setting. Note:• If the LAN IP Address changes, you must use the new IP address to log in to the router, in order to access the Web configuration page. • If the new LAN IP address is in a different network segment from the original LAN IP address, the dynamic IP service of the router is automatically switched to work in the network segment of the new LAN IP address. To apply virtual server, DMZ host and DHCP Static Address Allocation, please perform the settings again.• WAN Interface SettingsPlease refer to Basic Setting > WAN Interface Settings.• PPTP VPN ServerA PPTP Server (Point-To-Point Tunneling Protocol) allows you to connect securely from a remote location (such as your home) to an LAN (Local Area Network) located in another location, such as your workplace, business office, etc. This way you can use the services provided in your office at the comfort of your home.
17Chapter 3: Router Configuration300Mbps Wireless N RouerPPTP Server Basic Settings: Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. To allow PPTP tunnels to pass through the Router, keep the default as Enabled.Force MPPE Encryption: Keep the default as Enabled.PPTP user: Enter PPTP username provided by your ISP. PPTP password: Enter PPTP password provided by your ISP. PPTP client IP: Enter the PPTP client IP address. Click the Add button to save your setting.• MAC Address CloningA MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs require you to register a MAC address in order to access the Internet. If you were using cable modem, you were suggested to clone the current registered MAC address to the router. This page was designed to realize this function. Note: To enable this function, you would to ensure the computer connecting to the router is the main computer, and the computer links to the router by cable.Disable/Enable: To have the MAC address cloned, select Enable.MAC Address: The MAC address to be registered with your Internet service provider.Fill my MAC address: Click this button, system will clone the registered MAC address
18Chapter 3: Router Configuration300Mbps Wireless N Rouerfrom your computer and auto fill in the blanks.Save: Click the Save button to save your setting. Wireless SettingsThere are seven submenus under the wireless menu. Click any of them, you will be able to configure the corresponding function. • Basic SettingsPlease refer to section of Basic setting > wireless setting.• Wireless Security SettingsPlease refer to section of Basic setting > Wireless Security Setting.• Wireless MAC Address FilteringMAC Address: MAC addresses involved in the wireless host access control.Example:If you only want MAC address (00:0A:EB:00:07:5F) to access the wireless network while others cannot:1. The security policy chooses to allow.
19Chapter 3: Router Configuration300Mbps Wireless N Rouer2. Fill MAC address 00:0A:EB:00:07:5F in and click Save.If you want MAC address (00:0A:EB:00:07:5F) cannot access the wireless network while others can:1. The security policy chooses to refuse.2. Filling MAC address 00:0A:EB:00:07:5F in and click Save.In the MAC Address list, click Remove to delete the MAC addresses selected.• Advanced Wireless SettingsThis section is to configure the advanced wireless setting of the Router, including the Radio Preamble, 802.11g/n Rate, Fragmentation Threshold, RTS Threshold, Beacon Period and DTIM Interval. BG protection Mode: Auto by default. You can select On or Off. Beacon Interval: The interval for sending packets of the Beacon frame. Its value range is 20.1000ms, default as 100.DTIM Interval: It indicates the interval of the delivery traffic indication message (DTIM). The value range is between 1 and 255 milliseconds. The default value is 1.Fragment Threshold: Set the fragmentation threshold. Packets larger than the size set
20Chapter 3: Router Configuration300Mbps Wireless N Rouerin this field will be fragmented. Too many data packets will lower the wireless network performance. The Fragment Threshold value should not be set too low. The default value is 2346.RTS Threshold: Set the RTS (Request to send threshold) threshold. When the packet size is larger than the preset RTS size, the wireless router will send a RTS to the destination station to start a negotiation. The default value is 2347.TX Power: You can set the output power of wireless radio. Unless you are using this wireless router in a really big space, you may not have to set output power to 100%. This will enhance security (malicious/unknown users in distance will not be able to reach your wireless router). Enable WMM: If you select it, the router will process the packets with the priority first. You are recommended to select this option.APSD Capable: It is used for auto power-saved service. The default is Disabled.MAC Address List: The added MAC addresses are listed here. Click the Delete button to delete the filter management for this MAC address. Save: Click the Save button to save your Log. Note: If you are not familiar with the setting items in this page, it’s strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance. • Wireless Client ListShow wireless clients access to the wireless net.• WPS SettingsIn this page, you can configure the WPS settings, which can make your client automatically synchronize with the AP setting within several minutes and establish the connection.
21Chapter 3: Router Configuration300Mbps Wireless N RouerWPS (Wi-Fi Protected Setting): Easy and quick to establish the connection between wireless network client and Router through encrypted contents. The users only enter the PIN code to configure without selecting encryption method and entering secret keys by manual. WPS Mode: Supports two ways to configure WPS settings: PBC (Push-Button Configuration) and PIN code.PBC: Select the PBC button or press the WPS button on the panel of the Router. (Press WPS button and WPS LED will blink, which means the WPS function is enabled. During the blinking time, press the WPS button on another network device, WPS LED light will become solid when the connection succeeds.) PIN: If this option is enabled, you need to enter a wireless clients PIN code in the blank and keep the same code in the client. Save: Click the Save button to save your setting. • WDS Settings In this page, you can configure the function of WDS, supporting Repeater mode, Bridge mode and Lazy mode. You’d better use the same router in order to optimize the performance.
22Chapter 3: Router Configuration300Mbps Wireless N RouerWDS Mode: In this mode, you can expand the scope of network by combining up to four other access points together, and every access point can still accept wireless clients. Bridge Mode: You can wirelessly connect two or more wired networks via this mode. In this mode, you need to add the Wireless MAC address of the connecting device into the Routers AP MAC address table or select one from the scanning table. At the same time, the connecting device should be in Lazy, Repeater or Bridge mode. Repeater Mode: You can select the mode to extend the distance between the two WLAN devices. Functioning as a WDS repeater, the W306R connects to both a client card as an AP and to another AP. In typical repeater applications, APs connecting to other APs equipped with WDS functionality must also support WDS. In this mode, you need to add the MAC address of the connecting device into the Routers AP MAC address table and the connecting client should be in Lazy, Repeater or client mode.Encryption Type: You can select WEP 64bits mode, WEP 128bits mode TKIP mode, AES mode for security here. Encryption key: Enter the key, the key format according to encryption you selected. Wireless Access Node MAC Address: Input the MAC address of another wireless router. Note: Two wireless routers must use the same band, channel number, and security
23Chapter 3: Router Configuration300Mbps Wireless N Rouer setting. DHCP ServerThe TCP/IP protocol settings include the information of the IP address, subnet mask, gateway, and DNS server. Properly configuring the TCP/IP protocol for all computers in the LAN is not easy. Fortunately, the DHCP server provides this function.• DHCP ServiceIf you enable DHCP server of the router, the DHCP server automatically configures the TCP/IP protocol for each computer in the LAN.Start Address of Address Pool: The first IP address that is automatically assigned by the DHCP server.End Address of Address Pool: The last IP address that is automatically assigned by the DHCP server.Lease Time: The time length of the corresponding IP address lease. Gateway: You can enter the LAN IP address of the router. The default is 192.168.0.1. It is optional.Primary DNS Server: Enter the information of the DNS server provided by the ISP. You can consult your ISP. It is optional.Secondary DNS Server: If the ISP provides you two DNS servers, you can enter the IP address of the other DNS server in this field. It is optional.Save: Click the Save button to save your setting.
24Chapter 3: Router Configuration300Mbps Wireless N Rouer• Static Address AllocationIP Address: Enter one IP address for the computer on the LAN network. MAC Address: Enter the MAC address of the computer you want to assign the above IP address. Click Add to add the entry in the list. Save: Click the Save button to save your setting.• DHCP Client ListRefresh: Click to refresh the DHCP client list. Forwarding RuleThere are four submenus under the Forwarding menu, Port Forwarding, Port Triggering Setting, DMZ Host and UPnP Settings. Click any of them, and you will be able to configure the corresponding function.
25Chapter 3: Router Configuration300Mbps Wireless N Rouer• Port ForwardingDisable/Enable: To realize the function of port forwarding, select Enable. Rules Name: Enter the Rules Name.Server IP Address: Enter the IP address of the server that should receive these requests. Details please refer to the note below.Server Port Rang: The numbers of External Ports. You can type a service port or a range of service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port number).Client Port Rang: The numbers of client Ports. You can type a client port or a range of client ports (in XXX – YYY format, XXX is the start port number, YYY is the end port number).Protocol: Select the protocol (TCP/UDP/Both) for the application. Save: Click the Save button to save your setting. Note: • Before using port forwarding, you should assign a static IP address to the designated server, and then enter this static IP address into router as the Server IP Address.• Please ensure the SPI Firewall was closed before setting the port triggering. You could check the SPI Firewall settings at Expert SettingSecurity OptionsSecurity Settings.• Port Triggering SettingsChoose menu Forwarding > Port Triggering, you can view and add port triggering in the screen as shown below. Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so on. These applications cannot work with a pure NAT Router. Port Triggering is used for some of these applications that can work with an NAT Router.
26Chapter 3: Router Configuration300Mbps Wireless N RouerApplication Name: Describe the name of the application that being set.Start/End Trigger Port: The port for outgoing traffic. An outgoing connection using this port will trigger this rule. Trigger Protocol: The protocol used for Trigger Ports, TCP, UDP, or TCP/UDP. If you are not clear about which protocol was being used, TCP/UDP is recommended. Open Port: The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC that triggered this rule. Open Port Protocol: The protocol used for Incoming Ports Range, either TCP or UDP, or TCP/UDP. If you are not clear about which protocol was being used, TCP/UDP is recommended.To modify an existing entry: Enable: Select the number of application and click the Enable button to make it enabled.Disable: Select the number of application and click the Disabled button to make it disabled. Delete: Select the number of application and click the Delete button.Reset: Select the number of application and click the Reset button.To add a new rule, follow the steps below:Click Increase the application of rules button, the following screen appear:
27Chapter 3: Router Configuration300Mbps Wireless N RouerPlease select one of the applications: There are few common applications available such as Dailpad, MSN gaming, PC Phone etc. the blank will be automatically filled once been chosen. Custom application name: If the application you want to add is not included, enter the blank manually. Save: Click the Save button to save your setting. Note: • Before using port forwarding, you should assign a static IP address to the designated server, and then enter this static IP address into router as the Server IP Address.• Please ensure the SPI Firewall was closed before setting the port triggering. You could check the SPI Firewall settings at Expert Setting > Security Options > Security Settings.• DMZ HostDMZ Host forwards all the ports at the same time to one PC.DMZ Status: Click the checkbox to choose disable or enable DMZ.IP Address of DMZ Host: Click Search IP Address to clone the IP address of the computer you want to expose.Save: Click the Save button to save your setting.To set a DMZ host, do as follows: 1. Enter the IP address of the computer in the LAN that you want to set to a DMZ host in the DMZ Host IP Address field.2. Select Enabled.3. Click Save to complete the settings. Note: • Before using DMZ Host, you should assign a static IP address to the designated server, and then enter this static IP address into router as the Server IP Address.• DMZ priority is higher than the Port Forwarding, if the DMZ open, all the port forwarding rules are not effective.
28Chapter 3: Router Configuration300Mbps Wireless N Rouer• UPnP SettingsUPnP: Click the checkbox to Enable or Disable the UPnP. Save: Click the Save button to save your setting.• Multicast Forwarding Settings Security OptionsThere are four submenus under the Security Options menu: Security Settings, Advanced Security Settings, LAN Web Management and Remote Web Management. Click any of them, and you will be able to configure the corresponding function.• Security Settings
29Chapter 3: Router Configuration300Mbps Wireless N RouerStateful Packet Inspection (SPI): When the SPI firewall is enabled, the system refuses all requests from the Internet. Only packets that belong to connections that respond requests from the LAN and for which status database is created can pass the firewall and access to the LAN. By default, the SPI is enabled. To expose all hosts in the LAN to the Internet, you can disable SPI.Virtual Private Network (VPN): VPN provides a safe communication method among remote computers through WAN. If a host in the LAN wants to connect to the remote VPN network through the router by using the VPN protocol, such as PPTP, L2TP, or IPSec, you need to enable the corresponding VPN pass through.Application Layer Gateway (ALG): ALG supports that some protocols at the application layer that adopt the control/data mode, such as FTP, TFTP, and H323, help to translate network addresses and ports at the NAT gateway. You are recommended to enable this option. The Common Service Port drop-down list contains some common service ports. You can select one and click Add to add the service port to the virtual server list. • Advanced Security SettingsAnti DoS Attack: Check to enable it for attack prevention. IGMP-Flood Packet Threshold: If the number of ICMP data packets exceeds the threshold, the defense measures act immediately.Enable filtering UDP-FLOOD attack: Select it if you want to protect against UDP-FLOOD attacks.UDP-Flood Packet Threshold: If the number of UDP data packets exceeds the threshold, the defense measures act immediately.Enable filtering TCP-SYN-FLOOD attack: Select it if you want to protect against TCP-SYN-FLOOD attacks.TCP-SYN-Attack Packet Threshold: If the number of TCP-SYN data packets exceeds the threshold, the defense measures act immediately.
30Chapter 3: Router Configuration300Mbps Wireless N RouerBlock the PING packets from the WAN interface: If you select this option, the PC in the WAN cannot send the PING packets to the router.Block the PING packets from the LAN: If you select this option, the PC in the LAN cannot send the PING packets to the WAN.Save: Click the Save button to save your setting.• LAN Web ManagementThe alternative to remote web management, it is to allow the network administrator to manage the Router in LAN. Any PC in the LAN can access the Web management utility by default, so you can enter the specific MAC address of the LAN computer.MAC Address 1/2/3/4: Enter the MAC addresses of LAN computers. Save: Click the Save button to save your setting.• Remote Web ManagementThis section is to allow the network administrator to manage the Router remotely. If you want to access the Router from outside the local network, please select the Enable Remote Web Management. Web Management Port: The management port open to outside access the default value is 80. IP Address of Remote Web Management: Specify the range of the WAN IP address for remote management. Save: Click the Save button to save your setting.
31Chapter 3: Router Configuration300Mbps Wireless N Rouer Access ControlThere are two submenus under the Access Control menu. Click any of them, and you will be able to configure the corresponding function. • MAC/IP/Port Filter SettingsThis page is used to enable the firewall filtering function, select the filtering service or manually set the parameters that need to be filtered, such as MAC address, IP address and Port. You must set at least one filtering condition. You may also set multiple conditions or all the conditions.MAC/IP/Port Filtering: Select Enabled or Disabled to enable or disable filtering. Default Policy: Accepted chose, all the packets and devices will be allowed to be passed normally, opposite action will be happened if Dropped was been chosen.Current IP/Port Filtering Rules: All the existing rules will be listed below, any needed of rules deleting, please select the rules, and then click Delete Selected. Note: Please synchronize the routers time first when selecting the timing function.• Web URL Filtering
32Chapter 3: Router Configuration300Mbps Wireless N RouerWeb URL Filter: Check to enable URL filter.Save: Click the Save button to save your setting. Routing SettingsThere are two submenus under the Routing Setting menu. Click any of them, and you will be able to configure the corresponding function. • Static Routing TableThe main duty for router is to look for a best path for every data frame, and transfer this data frame to destination. So, it is essential for the router to choose the best path, i.e. routing arithmetic. In order to finish this function, many transferring paths, i.e. routing table, are saved in the router, for choosing when needed. • Dynamic Routing SettingsRIP: The Routing Information Protocol (RIP) is a dynamic routing protocol used in local and wide area networks. Choose Enable dynamic routing need to be activated.Rip Version: Choose the version of RIP.Authentication Code: Choose the encrypt method used between routers. Save: Click the Save button to save your setting.
33Chapter 3: Router Configuration300Mbps Wireless N Rouer IP Bandwidth ControlThere are two submenus under the IP Bandwidth Control menu. Click any of them, and you will be able to configure the corresponding function. • IP Bandwidth Control SettingsEnable IP bandwidth control: If you select it, the bandwidth control rule takes effect.Total Uplink Bandwidth: The rate of uploading through the WAN interface.Total Downlink Bandwidth: The rate of downloading through the WAN interface.Save: Click the Save button to save your setting. Note:• The bandwidth conversion: 1 Mbps = 1024 Kbps.• Select the type of the broadband line and the bandwidth according to the actual situation. If you are not sure about the information, consult your broadband provider.• After finishing the settings, click the Save button to apply the settings.• IP Bandwidth Control ListEnable IP bandwidth control: If you select it, the bandwidth control rule takes effect.Total Uplink Bandwidth: The rate of uploading through the WAN interface.Total Downlink Bandwidth: The rate of downloading through the WAN interface.Bandwidth setting: The min. rate can be zero, the sum of all items min. rate should be
34Chapter 3: Router Configuration300Mbps Wireless N Rouer the master bandwidth. The max rate must > 0. If the max rate is larger than the master bandwidth, the rule will use master bandwidth instead.Save: Click the Save button to save your setting. Dynamic DNS SettingsThe DDNS (Dynamic Domain Name System) is supported in this router. It is to assign a fixed host and domain name to a dynamic Internet IP address, which is used to monitor hosting website, FTP server and so on behind the Router. If you want to activate this function, please select Enable and a DDNS service provider to sign up. Dynamic DNS service website (DDNS): Select to enable or disable the DDNS service.Username: Enter the username the same as the registration name.Password: Enter the password you set.Dynamic DNS service address: Enter the DDNS service address.Save: Click the Save button to save your setting. System ToolsThis section is to select the time zone for your location. If you turn off the Router, the settings for time disappear. However, the Router will automatically obtain the GMT time again once it has access to the Internet.
35Chapter 3: Router Configuration300Mbps Wireless N Rouer• Network Time SettingsCurrent time: Show the current time.Time Zone: Select your time zone from the drop-down menu. Network time server: To set NTP server.Save: Click the Save button to save your setting. Note: The system will Synchronous with the Network Time Server every hour after saving, and it will affect the WAN dial-up on demand.• Diagnosis ToolsSelect: Select Ping or Tracert.IP Address/Domain Name: The destination IP address or domain name.Ping Packet Total: The number of transmitted data packet when Ping operation is carried out.Ping Packet Size: The size of transmitted data packet when Ping operation is carried
36Chapter 3: Router Configuration300Mbps Wireless N Rouerout.Ping Timeout: The timeout time of the ping operation.Tracert Hops: The hops of tracert.Click Start Diagnosis button, the selected ping or tracert testing will be started.Below is a Ping diagnosis example that router has been connected to IP 172.16.160.31:Below is a Ping diagnosis example that router has failed to connect to IP 100.1.1.1:• Wake On LANWOL broadcasts so called Magic Packet Frames across a network to wake up hardware that understands such packets. These are normally NICs with Wake On LAN function.MAC Address: Increase a MAC address to wake the computer on.Explain PC: Description about the computer.Add: Click the Add button to finish, and the computer will display in the list. Select one or more computers in the list, and click the Wake Up button, these computers will be waked up.
37Chapter 3: Router Configuration300Mbps Wireless N Rouer• Load Default SettingsLoad Default Settings: Click this button to restore to factory default settings. User Name: admin Password: admin IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 Note: After restoring to default settings, please restart the device, then the default settings can go into effect. • Export and Load Settings• RebootRebooting the Router makes the settings configured go into effect or to set the Router again if setting failure happens. Reboot the router: Click this button to reboot the device.
38Chapter 3: Router Configuration300Mbps Wireless N Rouer• System SettingsAccount: Enter the username you set.Enter the new Password: Enter the password you set. Re-enter password: Re-enter the password you set.• System LogThe section is to view the system log. Click the Refresh to update the log. Click Clear to clear all the shown information. If the log is over 150 records, it will clear them automatically. Enable remote System Log: Check the radio button to enable remote System Log.Save: Click the Save button to save your Log.Clean: Click the Clear button to clear all shown information.• Traffic StatisticsThis page used to display the current system memory usage, WLAN, LAN and WAN networks to send and receive data packets to the number.
39Chapter 3: Router Configuration300Mbps Wireless N Rouer Setup WizardPlease find the section of Setup Wizard. Software Upgrade Software UpdateYou can choose to upgrade manually by:1. Click the Browse button to browse the directory where you download the software upgrade files. 2. Click Update button to start upgrade.Or you can choose to upgrade automatically by click the Update button, the router will download and upgrade automatically from FTP server.Router will auto reboot when the upgrade finished. Note:• Router might be changed to factory default settings after upgrade, please backup in advance.• During the updating, please do not turn off the power.• Please make sure the software version is matching with the existing hardware. LogoutClick to logout from the router configuration web.
Chapter 4: Specification40300Mbps Wireless N Rouer Specifi cationWireless Standard IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACKWireless Signal Rate 11n: 300Mbps11g: 54Mbps11b: 11MbpsFrequency Range 2.4-2.4835GHz Wireless Transmit Power < 20dBmModulation Type OFDM/CCK/16-QAM/64-QAMReceiver Sensitivity 300M: -68dBm@10% PER108M: -68dBm@10% PER54M: -68dBm@10% PER11M: -85dBm@8% PER6M: -88dBm@10% PERSecurity 64/128-bit WEP, WPA/WPA2-Enterprise, WPA /WPA2-Personal (TKIP/AES)Support Operating System Microsoft® Windows® 98SE, NT, 2000, XP, Vista and Windows 7Hardware Connection 4 x 10/100Mbps LAN ports1 x 10/100Mbps WAN portPower connectorButton Power buttonWPS buttonReset buttonAntenna 2 x Fixed Omni-directional antennasPower Supply 12VDC, 0.5ADimension ( W x D x H ) 165 x 106 x 26.5mmPackage Contents1× Wireless N Router1× Power Adapter1× CD-ROM1× Quick Installation Guide1× RJ-45 Ethernet CableOthersOperating Temperature 0°C~40°C (32°F~104°F)Storage Temperature -40°C~70°C (-40°F~158°F)Relative Humidity 10% ~ 90%, non-condensingStorage Humidity 5% ~ 95%, non-condensingCertification FCC, CE, RoHS
Appendix A: Troubleshooting41300Mbps Wireless N Rouer Appendix A: Troubleshooting1. Feixun Setup cannot fi nd my Router.If Feixun Setup is not able to communicate with your Router during installation, please check the following items.• Ensure that the Router is on. The front-panel light should be on.• Make sure the computer is connected to the routers LAN port via cable.• Make sure the routers WAN port is connected to DSL modem via cable.• There may be firewall software on your computer preventing an outgoing connection. You may choose to temporarily disable this software before attempting setup.• Unplug the Routers power supply for 10 seconds, then plug it back in.2. The DSL telephone line does not fi t into the Routers Internet port.The Router does not replace your modem. You still need your DSL modem in order to use the Router. Connect the telephone line to the DSL modem, and then insert the setup CD into your computer. Follow the QIG to install your router.3. I cannot enter into the routers web page or cannot login.• Check if the computer is connected to the router.• Configure your computers IP address, details please refer to the section of Configure the Computers IP Address in this manual.• If you cannot login because of forgetting username and password, please reset router by pressing reset button for 5 seconds, and then login with default username and password (admin/admin).4. The computer cannot connect to the Internet.• Make sure that the Power LED, WAN LED, and Wireless LED are on; the LAN LED you connected is on or blinking.• Make sure the DSL/cable modem is connect to the Router correctly.• Make sure to enter correct password. If you have forgotten the password, please reset the router by pressing reset button.• Reconnect all of the devices on your network if you still cannot link to the Internet.5. The computer cannot connect to the network wirelessly.At first, please make sure you could log on the Internet successfully by cable (detailed operations please refer to Question 3), and then do the followings to check the wireless connection:• If you are far from the Router, you might try moving closer to see if you might have been out of range.
Appendix A: Troubleshooting42300Mbps Wireless N Rouer• Search available networks and choose your network. If your network SSID is not listed in, please connect to Router via a network cable, visit 192.168.0.1 and ensures the Broadcast SSID is enabled. This setting can be found on the Wireless Settings page.• Make sure the wireless network name or SSID is the same on both the computer and the Router.• If you have enabled wireless security, then make sure the same security method and key are used by both the computer and the Router.6. I’ve installed this new Router and some of my network clients (computers, game consoles etc.) are unable to connect.Your new Router came pre-configured with a network name and no password. All clients must use this network name to connect wirelessly to your Router. You will need to find the network settings on your client, and select the network name from the list of available networks to join the wireless network. Details please refer to your client (computer, game consoles etc.).
Appendix B: Certification43300Mbps Wireless N Rouer Appendix B: Certifi cation FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. FCC Caution• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible.• This device and its antenna(s) must not be co-located or operation in conjunction with any • other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Appendix B: Certification44300Mbps Wireless N Rouer CE Mark WarningMarking with the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National RestrictionsThis device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:Country Restriction Reason/remarkBulgaria None General authorization required for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012Italy None If used outside of own premises, general authorization is required Luxembourg None General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-ÅlesundRussian Federation None Only for indoor applications Note: Please don’t use the product outdoors in France.
Appendix C: Glossary45300Mbps Wireless N Rouer Appendix C: Glossary• 802.11b: The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks.• 802.11g: Specification for wireless networking at 54 Mbps using direct-sequence spread-spectrum (DSSS) technology, using OFDM modulation and operating in the unlicensed radio spectrum at 2.4GHz, and backward compatibility with IEEE 802.11b devices, and WEP encryption for security.• DDNS (Dynamic Domain Name System): The capability of assigning a fixed host and domain name to a dynamic Internet IP Address. • DHCP (Dynamic Host Confi guration Protocol): A protocol that automatically configure the TCP/IP parameters for the all the PC(s) that are connected to a DHCP server.• DMZ (Demilitarized Zone): A Demilitarized Zone allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. • DNS (Domain Name System): An Internet Service that translates the names of websites into IP addresses.• Domain Name: A descriptive name for an address or group of addresses on the Internet. • DSL (Digital Subscriber Line): A technology allowing data to be sent or received over existing traditional phone lines. • ISP (Internet Service Provider): A company that can provide access to the Internet.• MTU (Maximum Transmission Unit): The size in bytes of the largest packet that can be transmitted.• NAT (Network Address Translation): NAT technology translates IP addresses of a local area network to a different IP address for the Internet. • PPPoE (Point to Point Protocol over Ethernet): PPPoE is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. • SSID (Service Set Identifi cation): It is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name. • WEP (Wired Equivalent Privacy): A data privacy mechanism based on a 64-bit or 128-bit or 152-bit shared key algorithm, as described in the IEEE 802.11 standard. • Wi-Fi: A trade name for the 802.11b wireless networking standard, given by the Wireless
Appendix C: Glossary46300Mbps Wireless N RouerEthernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standards group promoting interoperability among 802.11b devices. • WLAN (Wireless Local Area Network): A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area.
Appendix D: Technical Support47300Mbps Wireless N Rouer Appendix D: Technical SupportPlease contact Feixun technical support through Feixun website: www.feixun.com.cnSupport via E-mail:support@feixun.com.cn Before you contact technical support, please have the following ready:• Model number of the product (e.g. FWR-714N)• Hardware version (e.g. Ver.: A1.0)• Serial number (S/N)All these information can be found on the label at the bottom of your product.
www.feixun.com.cnShanghai Feixun Communication Co., Ltd.

Navigation menu